kernel/drivers/rtc, branch linux-5.7.y

rtc: goldfish: Enable interrupt in set_alarm() when necessary

2020-08-26T09:42:10Z

[ Upstream commit 22f8d5a1bf230cf8567a4121fc3789babb46336d ] When use goldfish rtc, the "hwclock" command fails with "select() to /dev/rtc to wait for clock tick timed out". This is because "hwclock" need the set_alarm() hook to enable interrupt when alrm->enabled is true. This operation is missing in goldfish rtc (but other rtc drivers, such as cmos rtc, enable interrupt here), so add it. Signed-off-by: Huacai Chen Signed-off-by: Jiaxun Yang Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/1592654683-31314-1-git-send-email-chenhc@lemote.com Signed-off-by: Sasha Levin

rtc: pl031: fix set_alarm by adding back call to alarm_irq_enable

2020-08-21T11:07:35Z

[ Upstream commit 4df2ef85f0efe44505f511ca5e4455585f53a2da ] Commit c8ff5841a90b ("rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64") seemed to have accidentally removed the call to pl031_alarm_irq_enable from pl031_set_alarm while switching to 64-bit apis. Let us add back the same to get the set alarm functionality back. Fixes: c8ff5841a90b ("rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64") Signed-off-by: Sudeep Holla Signed-off-by: Alexandre Belloni Tested-by: Valentin Schneider Cc: Linus Walleij Cc: Alexandre Belloni Link: https://lore.kernel.org/r/20200714124556.20294-1-sudeep.holla@arm.com Signed-off-by: Sasha Levin

rtc: cpcap: fix range

2020-08-21T11:07:32Z

[ Upstream commit 3180cfabf6fbf982ca6d1a6eb56334647cc1416b ] Unbreak CPCAP driver, which has one more bit in the day counter increasing the max. range from 2014 to 2058. The original commit introducing the range limit was obviously wrong, since the driver has only been written in 2017 (3 years after 14 bits would have run out). Fixes: d2377f8cc5a7 ("rtc: cpcap: set range") Reported-by: Sicelo A. Mhlongo Reported-by: Dev Null Signed-off-by: Sebastian Reichel Signed-off-by: Alexandre Belloni Tested-by: Merlijn Wajer Acked-by: Tony Lindgren Acked-by: Merlijn Wajer Link: https://lore.kernel.org/r/20200629114123.27956-1-sebastian.reichel@collabora.com Signed-off-by: Sasha Levin

rtc: rv3028: Add missed check for devm_regmap_init_i2c()

2020-06-24T15:49:00Z

[ Upstream commit c3b29bf6f166f6ed5f04f9c125477358e0e25df8 ] rv3028_probe() misses a check for devm_regmap_init_i2c(). Add the missed check to fix it. Fixes: e6e7376cfd7b ("rtc: rv3028: add new driver") Signed-off-by: Chuhong Yuan Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20200528103950.912353-1-hslester96@gmail.com Signed-off-by: Sasha Levin

rtc: mc13xxx: fix a double-unlock issue

2020-06-24T15:48:21Z

[ Upstream commit 8816cd726a4fee197af2d851cbe25991ae19ea14 ] In function mc13xxx_rtc_probe, the mc13xxx_unlock() is called before rtc_register_device(). But in the error path of rtc_register_device(), the mc13xxx_unlock() is called again, which causes a double-unlock problem. Thus add a call of the function “mc13xxx_lock” in an if branch for the completion of the exception handling. Fixes: e4ae7023e182a ("rtc: mc13xxx: set range") Signed-off-by: Qiushi Wu Link: https://lore.kernel.org/r/20200503182235.1652-1-wu000273@umn.edu Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: rc5t619: Fix an ERR_PTR vs NULL check

2020-06-24T15:48:17Z

[ Upstream commit 11ddbdfb68e4f9791e4bd4f8d7c87d3f19670967 ] The devm_kzalloc() function returns NULL on error, it doesn't return error pointers so this check doesn't work. Fixes: 540d1e15393d ("rtc: rc5t619: Add Ricoh RC5T619 RTC driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200407092852.GI68494@mwanda Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

Merge tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2020-04-08T02:48:52Z

Pull mfd updates from Lee Jones: "New Drivers: - Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors New Device Support: - Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC - Add support for Comet Lake to Intel LPSS New Functionality: - Add support for Charger Detection to Spreadtrum SC27xx PMICs - Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC - Add ACPI enumeration support to Diolan DLN2 USB Adaptor Fix-ups: - Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847 - I2C registration; rn5t618 - Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1 - Use flexible-array members; omap-usb-tll, qcom-pm8xxx - Remove unnecessary casts; omap-usb-host, omap-usb-tll - Power (suspend/resume/poweroff) enhancements; rk808 - Improve error/sanity checking; dln2 - Use snprintf(); aat2870-core Bug Fixes: - Fix PCI IDs in intel-lpss-pci" * tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits) mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow mfd: dln2: Allow to be enumerated via ACPI mfd: da9062: Add support for interrupt polarity defined in device tree dt-bindings: bd718x7: Yamlify and add BD71850 mfd: dln2: Fix sanity checking for endpoints mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs mfd: sc27xx: Add USB charger type detection support dt-bindings: mfd: Document STM32 low power timer bindings mfd: rk808: Convert RK805 to shutdown/suspend hooks mfd: rk808: Reduce shutdown duplication mfd: rk808: Stop using syscore ops mfd: rk808: Ensure suspend/resume hooks always work mfd: rk808: Always use poweroff when requested mfd: omap: Remove useless cast for driver.name mfd: Kconfig: Fix some misspelling of the word functionality mfd: pm8xxx: Replace zero-length array with flexible-array member mfd: omap-usb-tll: Replace zero-length array with flexible-array member mfd: cpcap: Fix compile if MFD_CORE is not selected mfd: cros_ec: Check DT node for usbpd-notify add ...

Merge tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2020-04-04T17:38:01Z

Pull RTC updates from Alexandre Belloni: "More cleanup this cycle, with the final goal of removing the rtc_time_to_tm and rtc_tm_to_time wrappers. All the drivers that have been modified for this now are ready for the end of times (whether it happens in 2033, 2038, 2106, 2127 or even 4052). There is also a single new driver and the usual fixes and features. Summary: Subsystem: - The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been removed and only the 64bit version remain. - hctosys now works with drivers compiled as modules New driver: - MediaTek MT2712 SoC based RTC Drivers: - set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305, ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc, starfire, sun6i - ds1307: DS1388 oscillator failure detection and watchdog support - jz4740: JZ4760 support - pcf85063: clock out pin support - sun6i: external 32k oscillator is now optional, the range is now handled by the core, providing a solution for 2034" * tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (87 commits) rtc: ds1307: check for failed memory allocation on wdt rtc: class: remove redundant assignment to variable err rtc: remove rtc_time_to_tm and rtc_tm_to_time rtc: sun6i: let the core handle rtc range rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: ds1307: add support for watchdog timer on ds1388 rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: da9052: set range rtc: da9052: convert to devm_rtc_allocate_device rtc: imx-sc: Align imx sc msg structs to 4 rtc: fsl-ftm-alarm: report alarm to core rtc: pcf85063: Add pcf85063 clkout control to common clock framework rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space rtc: class: avoid unnecessary lookup in hctosys dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML rtc: jz4740: Rename vendor-specific DT properties rtc: jz4740: Add support for JZ4760 SoC rtc: class: support hctosys from modular RTC drivers rtc: pm8xxx: clear alarm register when alarm is not enabled rtc: omap: drop unused dt-bindings header ...

rtc: ds1307: check for failed memory allocation on wdt

2020-04-03T11:38:24Z

Currently a failed memory allocation will lead to a null pointer dereference on point wdt. Fix this by checking for a failed allocation and just returning. Addresses-Coverity: ("Dereference null return") Fixes: fd90d48db037 ("rtc: ds1307: add support for watchdog timer on ds1388") Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20200403110437.57420-1-colin.king@canonical.com Signed-off-by: Alexandre Belloni

rtc: class: remove redundant assignment to variable err

2020-04-02T16:47:30Z

The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20200402110411.508534-1-colin.king@canonical.com Signed-off-by: Alexandre Belloni