kernel/drivers/rtc/rtc-sun6i.c, branch linux-5.1.y

rtc: sun6i: Expose internal oscillator through device tree

2018-12-06T17:13:46Z

The bindings have been updated to expose the RTC's internal oscillator, for some SoCs that have it directly feeding the PRCM block. The changes include the index 2 for the clock outputs, as well as the clock output names. This patch adds the internal oscillator to the list of clocks exposed through of_clk_add_hw_provider(), and also have the driver optionally fetch the name of the clock from the device tree if it's available. Tested-by: Corentin Labbe Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Alexandre Belloni

rtc: sun6i: Add support for all known pre-H6 variants

2018-12-06T17:13:44Z

There are different variants to the RTC hardware first seen on sun6i (A31). The differences we care about in this driver are the clock rate for the internal oscillator, prescalers, and the presence of an external clock output. This patch adds support for all the known pre-H6 base compatibles using the variants data structure previously introduced. Acked-by: Maxime Ripard Tested-by: Corentin Labbe Signed-off-by: Chen-Yu Tsai Signed-off-by: Alexandre Belloni

rtc: sun6i: Add support for different variants

2018-12-06T17:13:43Z

Amongst the Allwinner SoCs that have seen some kind of coverage by the linux-sunxi community, whether it be mainline Linux or U-boot support, or just available datasheets, most newer chips use the RTC design first seen in the A31 (sun6i). Overall there have been some minor differences. This patch covers the following: - average clock rate of the internal RC oscillator + presence of fixed and adjustable prescaler for this clock - availability of an external (to the SoC) clock output One major difference regarding the H6 is the 24 MHz crystal is now routed through the RTC, as a digitally compensated oscillator (DCXO). This is not covered in this patch and will be supported later. Other differences are either unrelated to RTC or clock functionality, such as boot or crypto related registers, or the driver simply doesn't use the feature in question. One example of the latter is the calibration function for the RC oscillator. We consider this clock to be very bad and avoid using it. Acked-by: Maxime Ripard Tested-by: Corentin Labbe Signed-off-by: Chen-Yu Tsai Signed-off-by: Alexandre Belloni

rtc: sun6i: Add default clock name for LOSC

2018-12-06T17:13:41Z

The RTC's main clock, used internally and exported to the rest of the SoC, is called "LOSC" (low speed oscillator) through the hardware documentation. This patch adds a default name for this clock, in case the device tree does not provide one. This shouldn't happen, but lets play it safe. Acked-by: Maxime Ripard Tested-by: Corentin Labbe Signed-off-by: Chen-Yu Tsai Signed-off-by: Alexandre Belloni

rtc: sun6i: Use struct_size() in kzalloc()

2018-08-27T21:02:18Z

One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: Alexandre Belloni

rtc: sun6i: Fix bit_idx value for clk_register_gate

2018-05-31T21:02:11Z

clk-gate core will take bit_idx through clk_register_gate and then do clk_gate_ops by using BIT(bit_idx), but rtc-sun6i is passing bit_idx as BIT(bit_idx) it becomes BIT(BIT(bit_idx) which is wrong and eventually external gate clock is not enabling. This patch fixed by passing bit index and the original change introduced from below commit. "rtc: sun6i: Add support for the external oscillator gate" (sha1: 17ecd246414b3a0fe0cb248c86977a8bda465b7b) Signed-off-by: Michael Trimarchi Fixes: 17ecd246414b ("rtc: sun6i: Add support for the external oscillator gate") Cc: stable@vger.kernel.org Signed-off-by: Jagan Teki Acked-by: Maxime Ripard Signed-off-by: Alexandre Belloni

rtc: stop validating rtc_time in .read_time

2018-03-02T09:09:58Z

The RTC core is always calling rtc_valid_tm after the read_time callback. It is not necessary to call it just before returning from the callback. Signed-off-by: Alexandre Belloni

rtc: sun6i: ensure rtc is kfree'd on error

2017-12-18T22:05:10Z

The error return path on clk_data allocation failure does not kfree the allocated rtc object. Fix this with a kfree of rtc on the error exit path. Detected by CoverityScan, CID#1452264 ("Resource Leak") Signed-off-by: Colin Ian King Signed-off-by: Alexandre Belloni

rtc: sun6i: Add support for the external oscillator gate

2017-08-31T23:10:19Z

The RTC can output its 32kHz clock outside of the SoC, for example to clock a WiFi chip. Create a new clock that other devices will be able to retrieve, while maintaining the DT stability by providing a default name for that clock if clock-output-names doesn't list one. Signed-off-by: Maxime Ripard Signed-off-by: Alexandre Belloni

rtc: sun6i: ensure clk_data is kfree'd on error

2017-07-30T22:17:46Z

There are two error return paths that do not kfree clk_data and we end up with a memory leak. Fix these with a kfree error exit path. Detected by CoverityScan, CID#1402959 ("Resource Leak") Signed-off-by: Colin Ian King Signed-off-by: Alexandre Belloni