kernel/drivers/rtc/rtc-pcf2127.c, branch linux-4.16.y

rtc: pcf2127: bulk read only date and time registers.

2017-02-23T17:38:54Z

Read control registers one by one and bulk read time registers. This fixes when the clock is read, the watchdog counter register is zeroed. Signed-off-by: Sean Nyekjaer Signed-off-by: Alexandre Belloni

rtc: pcf2127: add pcf2129 device id

2016-03-14T16:08:41Z

There are only a few differences between PCF2127 and PCF2129 (PCF2127 has 512 bytes of general purpose SRAM and count-down timer). The rtc-pcf2127 driver currently doesn't use the PCF2127 specific functionality and Kconfig help text already says this driver supports PCF2127/29, so we can simply add pcf2129 to device id list. Signed-off-by: Akinobu Mita Cc: Alessandro Zummo Cc: Alexandre Belloni Signed-off-by: Alexandre Belloni

rtc: pcf2127: add support for spi interface

2016-03-14T16:08:41Z

pcf2127 has selectable I2C-bus and SPI-bus interface support. This adds support for SPI interface. Signed-off-by: Akinobu Mita Cc: Alessandro Zummo Cc: Alexandre Belloni Signed-off-by: Alexandre Belloni

rtc: pcf2127: convert to use regmap

2016-03-14T16:08:40Z

pcf2127 has selectable I2C-bus and SPI-bus interface support. Currently rtc-pcf2127 driver only supports I2C. This is preparation for support for SPI interface. Signed-off-by: Akinobu Mita Cc: Alessandro Zummo Cc: Alexandre Belloni Signed-off-by: Alexandre Belloni

rtc: pcf2127: remove useless driver version

2015-11-08T13:12:28Z

A driver version is only really sensible for oot drivers. Also the dev_info about having found a chip only signals that allocating the driver data succeeded and so isn't worth much. Signed-off-by: Uwe Kleine-König Signed-off-by: Alexandre Belloni

rtc: pcf2127: fix reading uninitialized value on RTC_READ_VL ioctl

2015-11-08T13:12:27Z

The flag reported on the RTC_READ_VL ioctl is only initialized when the date is read out. So the voltage low value doesn't represent reality but the status at the time the date was read (or 0 if the date was not read yet). Moreover when userspace requests a value via an ioctl there is no added benefit to also make a prosa representation of this (and other) values appear in the kernel log so remove the calls to dev_info and the driver data members to track their state. Signed-off-by: Uwe Kleine-König Signed-off-by: Alexandre Belloni

rtc: pcf2127: make module license match the file header

2015-11-02T23:50:46Z

The header of the pcf2127 driver specifies GPL v2 only as license, so use "GPL v2" as module license specifier instead of "GPL" as the latter means "GNU Public License v2 or later". Signed-off-by: Uwe Kleine-König Signed-off-by: Alexandre Belloni

rtc: Drop owner assignment from i2c_driver

2015-09-05T11:19:06Z

i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Alexandre Belloni

rtc: pcf2127: use OFS flag to detect unreliable date and warn the user

2015-09-05T11:19:06Z

The PCF2127 datasheet states that it's wrong to say that the date in unreliable if BLF (battery low flag) is set but instead, OSF (seconds register) should be used to check if oscillator, for any reason, stopped. Battery may be low (usually below 2V5 threshold) but the date may be anyway correct (typically date is unreliable when input voltage is below 1V2). Signed-off-by: Andrea Scian Signed-off-by: Alexandre Belloni

rtc: use rtc_valid_tm() error code when reading date/time

2015-09-05T11:19:06Z

There's a wrong comment in some RTC drivers that say it's better to ignore rtc_valid_tm() when reading RTC timestamp. However this is wrong and is better to return to the userspace the error if timestamp is not valid. Signed-off-by: Andrea Scian Signed-off-by: Alexandre Belloni