kernel/drivers/regulator/Kconfig, branch linux-5.1.y

regulator: max77650: add regulator support

2019-01-29T15:22:12Z

Add regulator support for max77650. We support all four variants of this PMIC including non-linear voltage table for max77651 SBB1 rail. Signed-off-by: Bartosz Golaszewski Signed-off-by: Mark Brown

regulator: bd70528: Support ROHM BD70528 regulator block

2019-01-23T15:50:18Z

BD70528MWV is an ultra-low Iq general purpose single-chip power management IC for battery-powered portable devices. Add support for controlling 3 bucks and 3 LDOs present in ROHM BD70528. Signed-off-by: Matti Vaittinen Signed-off-by: Mark Brown

regulator: Fix trivial language typos

2019-01-08T13:04:47Z

Fix few trivial language typos in core and drivers. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mark Brown

regulator: mcp16502: Select REGMAP_I2C to fix build error

2018-12-21T11:02:24Z

Fix build error when CONFIG_REGMAP_I2C=m && CONFIG_REGULATOR_MCP16502=y. drivers/regulator/mcp16502.o: In function `mcp16502_probe': mcp16502.c:(.text+0xca): undefined reference to `__devm_regmap_init_i2c' Signed-off-by: Axel Lin Signed-off-by: Mark Brown

regulator: mcp16502: add regulator driver for MCP16502

2018-12-13T12:19:04Z

This patch adds a regulator driver for the MCP16502 PMIC. This drivers supports basic operations through the regulator interface such as: - setting/reading voltage - setting/reading operating mode - reading current status Signed-off-by: Andrei Stefanescu Signed-off-by: Mark Brown

regulator: lochnagar: Add support for the Cirrus Logic Lochnagar

2018-10-12T16:53:03Z

Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. The Lochnagar board provides power supplies for the attached CODEC/Amp device. Currently this driver supports the microphone supplies and the digital core voltage for the attached device. There are some additional supplies that will be added in time but these supplies are sufficient for most systems/use-cases. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown

regulator: stpmic1: add stpmic1 regulator driver

2018-10-08T17:28:10Z

The stpmic1 PMIC embeds several regulators and switches with different capabilities. Signed-off-by: pascal paillet Signed-off-by: Mark Brown

regulator: bd718xx: rename bd71837 to 718xx

2018-09-28T13:57:13Z

rename bd71837-regulator.c to bd718x7-regulator.c to reflect the fact that also BD71847 is now supported by the driver. Signed-off-by: Matti Vaittinen Signed-off-by: Mark Brown

regulator: add QCOM RPMh regulator driver

2018-08-10T16:30:29Z

Add the QCOM RPMh regulator driver to manage PMIC regulators which are controlled via RPMh on some Qualcomm Technologies, Inc. SoCs. RPMh is a hardware block which contains several accelerators which are used to manage various hardware resources that are shared between the processors of the SoC. The final hardware state of a regulator is determined within RPMh by performing max aggregation of the requests made by all of the processors. Add support for PMIC regulator control via the voltage regulator manager (VRM) and oscillator buffer (XOB) RPMh accelerators. VRM supports manipulation of enable state, voltage, and mode. XOB supports manipulation of enable state. Signed-off-by: David Collins Reviewed-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke Signed-off-by: Mark Brown

regulator: bd71837: adobt MFD changes to regulator driver

2018-07-30T13:24:20Z

MFD part for bd71837 was changed during the review. Clean regulator part to match changed MFD: - renamed header file => fix include - remove unused platdata as also type definition was removed - Kconfig option for MFD part was changed => fix depends on clause - Rename Kconfig option for regulators As Kconfig option for regulators gets now used (when dependency to MFD is satisfied) change it so that it won't require new change when support for bd71847 is added. Signed-off-by: Matti Vaittinen Signed-off-by: Mark Brown