kernel/drivers/power/supply/Makefile, branch linux-5.1.y

power: supply: Add Spreadtrum SC27XX fuel gauge unit driver

2018-11-09T21:55:46Z

This patch adds the Spreadtrum SC27XX serial PMICs fuel gauge support, which is used to calculate the battery capacity. Original-by: Yuanjiang Yu Signed-off-by: Baolin Wang Acked-by: Linus Walleij Signed-off-by: Sebastian Reichel

power: supply: Add Spreadtrum SC2731 charger support

2018-09-20T00:58:08Z

This patch adds the SC2731 PMIC switch charger support. Signed-off-by: Baolin Wang Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel

adp5061: New driver for ADP5061 I2C battery charger

2018-07-06T17:36:14Z

This patch adds basic support for Analog Devices I2C programmable linear battery charger. With this driver, some parameters can be read and configured such as: * trickle charge current level (PRECHARGE_CURRENT) * trickle charge voltage threshold (VOLTAGE_MIN) * weak charge threshold (VOLTAGE_AVG) * constant current (CONSTANT_CHARGE_CURRENT) * constant charge voltage limit (CONSTANT_CHARGE_VOLTAGE_MAX) * battery full (CAPACITY_LEVEL) * input current limit (INPUT_CURRENT_LIMIT) * charger status (STATUS) * battery status (CAPACITY_LEVEL) * termination current (CHARGE_TERM_CURRENT) Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADP5061.pdf Signed-off-by: Stefan Popa Signed-off-by: Sebastian Reichel

power: supply: add cros-ec USBPD charger driver.

2018-07-05T15:12:52Z

This driver gets various bits of information about what is connected to USB PD ports from the EC and converts that into power_supply properties. Signed-off-by: Sameer Nanda Signed-off-by: Enric Balletbo i Serra Acked-by: Lee Jones Signed-off-by: Sebastian Reichel

Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2017-11-15T01:52:21Z

Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

power: Adds support for Smart Battery System Manager

2017-10-28T21:43:19Z

This patch adds support for Smart Battery System Manager. A SBSM is a device listening at I2C/SMBus address 0x0a and is capable of communicating up to four I2C smart battery devices. All smart battery devices are listening at address 0x0b, so the SBSM muliplexes between them. The driver makes use of the I2C-Mux framework to allow smart batteries to be bound via device tree, i.e. the sbs-battery driver. Via sysfs interface the online state and charge type are presented. If the driver is bound as ltc1760 (an implementation of a Dual Smart Battery System Manager) the charge type can also be changed from trickle to fast. Signed-off-by: Karl-Heinz Schneider Signed-off-by: Phil Reid Reviewed-by: Sebastian Reichel Signed-off-by: Wolfram Sang

Merge branch 'psy-w1-for-v4.14-immutable' into for-next

2017-07-25T13:18:27Z

Merge immutable branch moving bq27000 driver from w1 subsystem into power-supply subsystem. Signed-off-by: Sebastian Reichel

power: supply: move HDQ interface for bq27xxx from w1 to power/supply

2017-07-25T13:17:39Z

The HDQ interface driver should be in this folder just like the I2C interface driver. Move this driver out of drivers/w1/slave and into drivers/power/supply. Signed-off-by: Andrew F. Davis Acked-by: Pali Rohár Signed-off-by: Sebastian Reichel

power: supply: Add support for MAX1721x standalone fuel gauge

2017-07-24T12:09:34Z

The MAX17211 monitor a single cell pack. The MAX17215 monitor and balance a 2S or 3S pack or monitor a multiple-series cell pack. Both device use 1-Wire interfce. Signed-off-by: Alex A. Mihaylov Signed-off-by: Sebastian Reichel