kernel/drivers/platform/chrome, branch linux-6.9.y

platform/chrome: cros_usbpd_notify: provide ID table for avoiding fallback match

2024-06-27T11:52:12Z

[ Upstream commit 8ad3b9652ed6a115c56214a0eab06952818b3ddf ] Instead of using fallback driver name match, provide ID table[1] for the primary match. [1]: https://elixir.bootlin.com/linux/v6.8/source/drivers/base/platform.c#L1353 Reviewed-by: Benson Leung Acked-by: Prashant Malani Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240329075630.2069474-8-tzungbi@kernel.org Signed-off-by: Tzung-Bi Shih Signed-off-by: Sasha Levin

platform/chrome: cros_usbpd_logger: provide ID table for avoiding fallback match

2024-06-27T11:52:12Z

[ Upstream commit e0e59c5335a0a038058a080474c34fe04debff33 ] Instead of using fallback driver name match, provide ID table[1] for the primary match. [1]: https://elixir.bootlin.com/linux/v6.8/source/drivers/base/platform.c#L1353 Reviewed-by: Benson Leung Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240329075630.2069474-7-tzungbi@kernel.org Signed-off-by: Tzung-Bi Shih Signed-off-by: Sasha Levin

platform/chrome: cros_ec: Handle events during suspend after resume completion

2024-06-16T11:50:56Z

commit 2fbe479c0024e1c6b992184a799055e19932aa48 upstream. Commit 47ea0ddb1f56 ("platform/chrome: cros_ec_lpc: Separate host command and irq disable") re-ordered the resume sequence. Before that change, cros_ec resume sequence is: 1) Enable IRQ 2) Send resume event 3) Handle events during suspend After commit 47ea0ddb1f56 ("platform/chrome: cros_ec_lpc: Separate host command and irq disable"), cros_ec resume sequence is: 1) Enable IRQ 2) Handle events during suspend 3) Send resume event. This re-ordering leads to delayed handling of any events queued between items 2) and 3) with the updated sequence. Also in certain platforms, EC skips triggering interrupt for certain events eg. mkbp events until the resume event is received. Such events are stuck in the host event queue indefinitely. This change puts back the original order to avoid any delay in handling the pending events. Fixes: 47ea0ddb1f56 ("platform/chrome: cros_ec_lpc: Separate host command and irq disable") Cc: Cc: Lalith Rajendran Cc: Signed-off-by: Karthikeyan Ramasubramanian Link: https://lore.kernel.org/r/20240429121343.v2.1.If2e0cef959f1f6df9f4d1ab53a97c54aa54208af@changeid Signed-off-by: Tzung-Bi Shih Signed-off-by: Greg Kroah-Hartman

Merge tag 'tag-chrome-platform-fixes-for-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

2024-04-11T18:15:09Z

Pull chrome platform fix from Tzung-Bi Shih: "Fix a NULL pointer dereference" * tag 'tag-chrome-platform-fixes-for-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_uart: properly fix race condition

platform/chrome: cros_ec_uart: properly fix race condition

2024-04-11T01:53:04Z

The cros_ec_uart_probe() function calls devm_serdev_device_open() before it calls serdev_device_set_client_ops(). This can trigger a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: ... ? ttyport_receive_buf A simplified version of crashing code is as follows: static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl, const u8 *data, size_t count) { struct serdev_device *serdev = ctrl->serdev; if (!serdev || !serdev->ops->receive_buf) // CRASH! return 0; return serdev->ops->receive_buf(serdev, data, count); } It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops will also exist. This conflicts with the existing cros_ec_uart_probe() logic, as it first calls devm_serdev_device_open() (which sets SERPORT_ACTIVE), and only later sets serdev->ops via serdev_device_set_client_ops(). Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") attempted to fix a similar race condition, but while doing so, made the window of error for this race condition to happen much wider. Attempt to fix the race condition again, making sure we fully setup before calling devm_serdev_device_open(). Fixes: 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") Cc: stable@vger.kernel.org Signed-off-by: Noah Loomans Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20240410182618.169042-2-noah@noahloomans.com Signed-off-by: Tzung-Bi Shih

Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-03-21T19:44:10Z

Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY/Serial driver updates and cleanups for 6.9-rc1. Included in here are: - more tty cleanups from Jiri - loads of 8250 driver cleanups from Andy - max310x driver updates - samsung serial driver updates - uart_prepare_sysrq_char() updates for many drivers - platform driver remove callback void cleanups - stm32 driver updates - other small tty/serial driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) dt-bindings: serial: stm32: add power-domains property serial: 8250_dw: Replace ACPI device check by a quirk serial: Lock console when calling into driver before registration serial: 8250_uniphier: Switch to use uart_read_port_properties() serial: 8250_tegra: Switch to use uart_read_port_properties() serial: 8250_pxa: Switch to use uart_read_port_properties() serial: 8250_omap: Switch to use uart_read_port_properties() serial: 8250_of: Switch to use uart_read_port_properties() serial: 8250_lpc18xx: Switch to use uart_read_port_properties() serial: 8250_ingenic: Switch to use uart_read_port_properties() serial: 8250_dw: Switch to use uart_read_port_properties() serial: 8250_bcm7271: Switch to use uart_read_port_properties() serial: 8250_bcm2835aux: Switch to use uart_read_port_properties() serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties() serial: port: Introduce a common helper to read properties serial: core: Add UPIO_UNKNOWN constant for unknown port type serial: core: Move struct uart_port::quirks closer to possible values serial: sh-sci: Call sci_serial_{in,out}() directly serial: core: only stop transmit when HW fifo is empty serial: pch: Use uart_prepare_sysrq_char(). ...

Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-03-21T19:35:20Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ...

platform/chrome: cros_ec_typec: Make sure the USB role switch has PLD

2024-02-17T16:02:42Z

The USB role switch does not always have the _PLD (Physical Location of Device) in ACPI tables. If it's missing, assigning the PLD hash of the port to the switch. That should guarantee that the USB Type-C port mapping code is always able to find the connection between the two (the port and the switch). Tested-by: Uday Bhat Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240213130018.3029991-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"

2024-02-08T11:54:47Z

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"") some functions and struct members were renamed. To not break all drivers compatibility macros were provided. To be able to remove these compatibility macros push the renaming into this driver. Acked-by: Tzung-Bi Shih Acked-by: Jonathan Cameron Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/cfbafd8a581a3ca37134cb84cef4370959012d9d.1707324794.git.u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown

treewide, serdev: change receive_buf() return type to size_t

2024-01-28T02:13:53Z

receive_buf() is called from ttyport_receive_buf() that expects values ">= 0" from serdev_controller_receive_buf(), change its return type from ssize_t to size_t. The need for this clean-up was noticed while fixing a warning, see commit 94d053942544 ("Bluetooth: btnxpuart: fix recv_buf() return value"). Changing the callback prototype to return an unsigned seems the best way to document the API and ensure that is properly used. GNSS drivers implementation of serdev receive_buf() callback return directly the return value of gnss_insert_raw(). gnss_insert_raw() returns a signed int, however this is not an issue since the value returned is always positive, because of the kfifo_in() implementation. gnss_insert_raw() could be changed to return also an unsigned, however this is not implemented here as request by the GNSS maintainer Johan Hovold. Suggested-by: Jiri Slaby Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/ Signed-off-by: Francesco Dolcini Acked-by: Jonathan Cameron #for-iio Reviewed-by: Johan Hovold Reviewed-by: Rob Herring Reviewed-by: Alex Elder Acked-by: Maximilian Luz # for platform/surface Acked-by: Lee Jones Acked-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20240122180551.34429-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman