kernel/drivers/pinctrl/tegra/pinctrl-tegra124.c, branch linux-6.9.y

pinctrl: tegra: Duplicate pinmux functions table

2023-06-01T11:17:35Z

The function table is filled with group information based on other instance-specific data at runtime. However, the function table can be shared between multiple instances, causing the ->probe() function for one instance to overwrite the table of a previously probed instance. Fix this by sharing only the function names and allocating a separate function table for each instance. Fixes: 5a0047360743 ("pinctrl: tegra: Separate Tegra194 instances") Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/20230530105308.1292852-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2019-07-13T22:02:27Z

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...

pinctrl: tegra: Add bitmask support for parked bits

2019-06-25T13:35:58Z

Some pin groups have park bits for multiple pins in one register. Support this by turning the parked bit field into a parked bitmask field. If no parked bits are supported, the bitmask can be 0. Update the pingroup table on Tegra210, which is the only generation where this is supported, with the parked bitmask. Signed-off-by: Thierry Reding Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Linus Walleij

pinctrl: tegra: Set specific GPIO compatible string

2019-06-25T13:34:37Z

Rather than reuse the nvidia,tegra30-gpio compatible string to find the GPIO controller on Tegra30, Tegra114, Tegra124 and Tegra210, use the most specific compatible string for each SoC generation for consistency. Signed-off-by: Thierry Reding Reviewed-by: Dmitry Osipenko Signed-off-by: Linus Walleij

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

2019-06-05T15:36:37Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman

pinctrl: tegra: Move drivers registration to arch_init level

2018-08-03T17:17:39Z

There is a bug in regards to deferred probing within the drivers core that causes GPIO-driver to suspend after its users. The bug appears if GPIO-driver probe is getting deferred, which happens after introducing dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges" property in device-tree. The bug in the drivers core is old (more than 4 years now) and is well known, unfortunately there is no easy fix for it. The good news is that we can workaround the deferred probe issue by changing GPIO / PINCTRL drivers registration order and hence by moving PINCTRL driver registration to the arch_init level and GPIO to the subsys_init. Signed-off-by: Dmitry Osipenko Acked-by: Stefan Agner Signed-off-by: Linus Walleij

pinctrl: tegra: define GPIO compatible node per SoC

2018-07-29T21:37:03Z

Tegra 2 uses a different GPIO controller which uses "tegra20-gpio" as compatible string. Make the compatible string the GPIO node is using a SoC specific property. This prevents the kernel from registering the GPIO range twice in case the GPIO range is specified in the device tree. Fixes: 9462510ce31e ("pinctrl: tegra: Only set the gpio range if needed") Signed-off-by: Stefan Agner Signed-off-by: Linus Walleij

pinctrl: tegra: clean up modular vs. non-modular distinctions

2017-05-29T08:24:42Z

None of the Kconfigs for any of these drivers are tristate, meaning that they currently are not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the drivers there is no doubt they are builtin-only. All drivers get similar changes, so they are handled in batch. We remove module.h from code that isn't doing anything modular at all; if they have __init sections, then replace it with init.h. A couple drivers have module_exit() code that is essentially orphaned, and so we remove that. Quite a few bool drivers (hence non-modular) are converted over to to builtin_platform_driver(). Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij Cc: Stephen Warren Cc: Thierry Reding Cc: Alexandre Courbot Cc: Pritesh Raithatha Cc: Ashwini Ghuge Cc: linux-gpio@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Paul Gortmaker Signed-off-by: Linus Walleij

Revert "Revert "pinctrl: tegra: avoid parked_reg and parked_bank""

2016-05-30T07:41:45Z

This reverts commit 0d5358330c20d50e52e3e65ff07a5db8007041fc.

Revert "pinctrl: tegra: avoid parked_reg and parked_bank"

2016-05-13T00:45:04Z

This reverts commit 1d18a3f0f0809f6c71f1f6e9e268ee904ce0b588.