kernel/drivers/pinctrl/aspeed, branch linux-6.9.y

Merge tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2024-04-30T15:50:58Z

Pull pin control fixes from Linus Walleij: - Fix a double-free in the pinctrl_enable() errorpath - Fix a refcount leak in pinctrl_dt_to_map() - Fix selecting the GPIO pin control state and the UART3 pin config group in the Intel Baytrail driver - Fix readback of schmitt trigger status in the Mediatek Paris driver, along with some semantic pin config issues in this driver - Fix a pin suffix typo in the Meson A1 driver - Fix an erroneous register offset in he Aspeed G6 driver - Fix an inconsistent lock state and the interrupt type on resume in the Renesas RZG2L driver - Fix some minor confusion in the Renesas DT bindings * tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: renesas: rzg2l: Configure the interrupt type on resume pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map() pinctrl: baytrail: Add pinconf group for uart3 pinctrl: baytrail: Fix selecting gpio pinctrl state pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback pinctrl: core: delete incorrect free in pinctrl_enable() pinctrl/meson: fix typo in PDM's pin name pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties

kbuild: make -Woverride-init warnings more consistent

2024-03-31T02:32:26Z

The -Woverride-init warn about code that may be intentional or not, but the inintentional ones tend to be real bugs, so there is a bit of disagreement on whether this warning option should be enabled by default and we have multiple settings in scripts/Makefile.extrawarn as well as individual subsystems. Older versions of clang only supported -Wno-initializer-overrides with the same meaning as gcc's -Woverride-init, though all supported versions now work with both. Because of this difference, an earlier cleanup of mine accidentally turned the clang warning off for W=1 builds and only left it on for W=2, while it's still enabled for gcc with W=1. There is also one driver that only turns the warning off for newer versions of gcc but not other compilers, and some but not all the Makefiles still use a cc-disable-warning conditional that is no longer needed with supported compilers here. Address all of the above by removing the special cases for clang and always turning the warning off unconditionally where it got in the way, using the syntax that is supported by both compilers. Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options") Signed-off-by: Arnd Bergmann Acked-by: Hamza Mahfooz Acked-by: Jani Nikula Acked-by: Andrew Jeffery Signed-off-by: Jani Nikula Reviewed-by: Linus Walleij Signed-off-by: Masahiro Yamada

pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T

2024-03-28T09:15:15Z

The register offset to disable the internal pull-down of GPIOR~T is 0x630 instead of 0x620, as specified in the Ast2600 datasheet v15 The datasheet can download from the official Aspeed website. Fixes: 15711ba6ff19 ("pinctrl: aspeed-g6: Add AST2600 pinconf support") Reported-by: Delphine CC Chiu Signed-off-by: Billy Tsai Reviewed-by: Paul Menzel Reviewed-by: Andrew Jeffery Message-ID: <20240313092809.2596644-1-billy_tsai@aspeedtech.com> Signed-off-by: Linus Walleij

pinctrl: aspeed: Allow changing SPI mode from hardware strap defaults

2023-10-10T12:01:30Z

Some platforms unfortunately have their SPI mode selection bits strapped incorrectly (such as being configured for passthrough mode when master mode is in fact the only useful configuration for it) and thus require correction in software. Add the SPI mode bits to the GPIO passthrough bits as the exceptions to the read-only rule for the hardware strap register so that the pinctrl subsystem can be used for such corrections. Signed-off-by: Zev Weiss Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20231005030849.11352-2-zev@bewilderbeest.net Signed-off-by: Linus Walleij

pinctrl: pinctrl-aspeed-g6: Add more settings for USB2AHP function

2023-09-25T12:32:39Z

AST2600 USB2AHP (USB PortA: PCIe EHCI to PHY) function needs to set the register SCUC20[16]. Set it to enable the PCIe EHCI device on PCIe bus. Besides, also add USB2AHP signal expressions into pin declarations. Signed-off-by: Joe Wang Link: https://lore.kernel.org/r/20230920103332.274151-1-joe_wang@aspeedtech.com Signed-off-by: Linus Walleij

pinctrl: aspeed: Revert "Force to disable the function's signal"

2023-01-30T22:51:03Z

This reverts commit cf517fef601b9dde151f0afc27164d13bf1fd907. The commit cf517fef601b ("pinctrl: aspeed: Force to disable the function's signal") exposed a problem with fetching the regmap for reading the GFX register. The Romulus machine the device tree contains a gpio hog for GPIO S7. With the patch applied: Muxing pin 151 for GPIO Disabling signal VPOB9 for VPO aspeed-g5-pinctrl 1e6e2080.pinctrl: Failed to acquire regmap for IP block 1 aspeed-g5-pinctrl 1e6e2080.pinctrl: request() failed for pin 151 The code path is aspeed-gpio -> pinmux-g5 -> regmap -> clk, and the of_clock code returns an error as it doesn't have a valid struct clk_hw pointer. The regmap call happens because pinmux wants to check the GFX node (IP block 1) to query bits there. For reference, before the offending patch: Muxing pin 151 for GPIO Disabling signal VPOB9 for VPO Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000 Disabling signal VPOB9 for VPOOFF1 Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000 Disabling signal VPOB9 for VPOOFF2 Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000 Enabling signal GPIOS7 for GPIOS7 Muxed pin 151 as GPIOS7 gpio-943 (seq_cont): hogged as output/low We can't skip the clock check to allow pinmux to proceed, because the write to disable VPOB9 will try to set a bit in the GFX register space which will not stick when the IP is in reset. However, we do not want to enable the IP just so pinmux can do a disable-enable dance for the pin. For now, revert the offending patch while a correct solution is found. Fixes: cf517fef601b ("pinctrl: aspeed: Force to disable the function's signal") Link: https://github.com/openbmc/linux/issues/218 Signed-off-by: Joel Stanley Link: https://lore.kernel.org/r/20230130220845.917985-1-joel@jms.id.au Signed-off-by: Linus Walleij

pinctrl: aspeed: Fix confusing types in return value

2023-01-27T12:32:44Z

The function signature is int, but we return a bool. Instead return a negative errno as the kerneldoc suggests. Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs") Signed-off-by: Joel Stanley Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20230119231856.52014-1-joel@jms.id.au Signed-off-by: Linus Walleij

pinctrl: aspeed: Add missing header(s)

2022-10-24T09:31:27Z

Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. Signed-off-by: Andy Shevchenko Acked-by: Linus Walleij

pinctrl: aspeed: Force to disable the function's signal

2022-08-31T12:14:31Z

When the driver want to disable the signal of the function, it doesn't need to query the state of the mux function's signal on a pin. The condition below will miss the disable of the signal: Ball | Default | P0 Signal | P0 Expression | Other -----+---------+-----------+-----------------------------+---------- E21 GPIOG0 SD2CLK SCU4B4[16]=1 & SCU450[1]=1 GPIOG0 -----+---------+-----------+-----------------------------+---------- B22 GPIOG1 SD2CMD SCU4B4[17]=1 & SCU450[1]=1 GPIOG1 -----+---------+-----------+-----------------------------+---------- Assume the register status like below: SCU4B4[16] == 1 & SCU4B4[17] == 1 & SCU450[1]==1 After the driver set the Ball E21 to the GPIOG0: SCU4B4[16] == 0 & SCU4B4[17] == 1 & SCU450[1]==0 When the driver want to set the Ball B22 to the GPIOG1, the condition of the SD2CMD will be false causing SCU4B4[17] not to be cleared. Signed-off-by: Billy Tsai Acked-by: Andrew Jeffery Link: https://lore.kernel.org/r/20220818101839.28860-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2022-08-10T18:01:44Z

Pull pin control updates from Linus Walleij: "Outside the pinctrl driver and DT bindings we hit some Arm DT files, patched by the maintainers. Other than that it is business as usual. Core changes: - Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver). New drivers: - Intel Meteor Lake support. - Reneasas RZ/V2M and r8a779g0 (R-Car V4H). - AXP209 variants AXP221, AXP223 and AXP809. - Qualcomm MSM8909, PM8226, PMP8074 and SM6375. - Allwinner D1. Improvements: - Proper pin multiplexing in the AMD driver. - Mediatek MT8192 can use generic drive strength and pin bias, then fixes on top plus some I2C pin group fixes. - Have the Allwinner Sunplus SP7021 use the generic DT schema and make interrupts optional. - Handle Qualcomm SC7280 ADSP. - Handle Qualcomm MSM8916 CAMSS GP clock muxing. - High impedance bias on ZynqMP. - Serialize StarFive access to MMIO. - Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO" * tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits) dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM pinctrl: qcom: sm8250: Fix PDC map pinctrl: amd: Fix an unused variable dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp dt-bindings: pinctrl: mt8186: Add gpio-line-names property ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header pinctrl: amd: Use unicode for debugfs output pinctrl: amd: Fix newline declaration in debugfs output pinctrl: at91: Fix typo 'the the' in comment dt-bindings: pinctrl: st,stm32: Correct 'resets' property name pinctrl: mvebu: Missing a blank line after declarations. pinctrl: qcom: Add SM6375 TLMM driver dt-bindings: pinctrl: Add DT schema for SM6375 TLMM dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable" pinctrl: imx93: Add MODULE_DEVICE_TABLE() pinctrl: sunxi: Add driver for Allwinner D1 pinctrl: sunxi: Make some layout parameters dynamic pinctrl: sunxi: Refactor register/offset calculation ...