kernel/drivers/phy, branch linux-5.15.y

phy: fsl-imx8mq-usb: disable bind/unbind platform driver feature

2026-03-04T12:20:17Z

[ Upstream commit 27ee0869d77b2cb404770ac49bdceae3aedf658b ] Disabling PHYs in runtime usually causes the client with external abort exception or similar issue due to lack of API to notify clients about PHY removal. This patch removes the possibility to unbind i.MX PHY drivers in runtime. Signed-off-by: Xu Yang Reviewed-by: Frank Li Link: https://patch.msgid.link/20260120111712.3159782-1-xu.yang_2@nxp.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: mvebu-cp110-utmi: fix dr_mode property read from dts

2026-03-04T12:20:17Z

[ Upstream commit e2ce913452ab56b3330539cc443b97b7ea8c3a1a ] The problem with the current implementation is that it does not consider that the USB controller can have multiple PHY handles with different arguments count, as for example we have in our cn9131 based platform: "phys = <&cp0_comphy1 0>, <&cp0_utmi0>;". In such case calling "of_usb_get_dr_mode_by_phy" with -1 (no phy-cells) leads to not proper phy detection, taking the "marvell,cp110-utmi-phy" dts definition we can call the "of_usb_get_dr_mode_by_phy" with 0 (#phy-cells = <0>) and safely look for that phy. Signed-off-by: Aleksandar Gerasimovski Link: https://patch.msgid.link/20260106150643.922110-1-aleksandar.gerasimovski@belden.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: tegra: xusb: Explicitly configure HS_DISCON_LEVEL to 0x7

2026-02-06T15:41:48Z

commit b246caa68037aa495390a60d080acaeb84f45fff upstream. The USB2 Bias Pad Control register manages analog parameters for signal detection. Previously, the HS_DISCON_LEVEL relied on hardware reset values, which may lead to the detection failure. Explicitly configure HS_DISCON_LEVEL to 0x7. This ensures the disconnect threshold is sufficient to guarantee reliable detection. Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang Link: https://patch.msgid.link/20251212032116.768307-1-waynec@nvidia.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

phy: rockchip: inno-usb2: fix communication disruption in gadget mode

2026-02-06T15:41:47Z

commit 7d8f725b79e35fa47e42c88716aad8711e1168d8 upstream. When the OTG USB port is used to power to SoC, configured as peripheral and used in gadget mode, communication stops without notice about 6 seconds after the gadget is configured and enumerated. The problem was observed on a Radxa Rock Pi S board, which can only be powered by the only USB-C connector. That connector is the only one usable in gadget mode. This implies the USB cable is connected from before boot and never disconnects while the kernel runs. The related code flow in the PHY driver code can be summarized as: * the first time chg_detect_work starts (6 seconds after gadget is configured and enumerated) -> rockchip_chg_detect_work(): if chg_state is UNDEFINED: property_enable(base, &rphy->phy_cfg->chg_det.opmode, false); [Y] * rockchip_chg_detect_work() changes state and re-triggers itself a few times until it reaches the DETECTED state: -> rockchip_chg_detect_work(): if chg_state is DETECTED: property_enable(base, &rphy->phy_cfg->chg_det.opmode, true); [Z] At [Y] all existing communications stop. E.g. using a CDC serial gadget, the /dev/tty* devices are still present on both host and device, but no data is transferred anymore. The later call with a 'true' argument at [Z] does not restore it. Due to the lack of documentation, what chg_det.opmode does exactly is not clear, however by code inspection it seems reasonable that is disables something needed to keep the communication working, and testing proves that disabling these lines lets gadget mode keep working. So prevent changes to chg_det.opmode when there is a cable connected (VBUS present). Fixes: 98898f3bc83c ("phy: rockchip-inno-usb2: support otg-port for rk3399") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/ Signed-off-by: Luca Ceresoli Reviewed-by: Théo Lebrun Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-2-dac8a02cd2ca@bootlin.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

phy: rockchip: inno-usb2: fix disconnection in gadget mode

2026-02-06T15:41:47Z

commit 028e8ca7b20fb7324f3e5db34ba8bd366d9d3acc upstream. When the OTG USB port is used to power the SoC, configured as peripheral and used in gadget mode, there is a disconnection about 6 seconds after the gadget is configured and enumerated. The problem was observed on a Radxa Rock Pi S board, which can only be powered by the only USB-C connector. That connector is the only one usable in gadget mode. This implies the USB cable is connected from before boot and never disconnects while the kernel runs. The problem happens because of the PHY driver code flow, summarized as: * UDC start code (triggered via configfs at any time after boot) -> phy_init -> rockchip_usb2phy_init -> schedule_delayed_work(otg_sm_work [A], 6 sec) -> phy_power_on -> rockchip_usb2phy_power_on -> enable clock -> rockchip_usb2phy_reset * Now the gadget interface is up and running. * 6 seconds later otg_sm_work starts [A] -> rockchip_usb2phy_otg_sm_work(): if (B_IDLE state && VBUS present && ...): schedule_delayed_work(&rport->chg_work [B], 0); * immediately the chg_detect_work starts [B] -> rockchip_chg_detect_work(): if chg_state is UNDEFINED: if (!rport->suspended): rockchip_usb2phy_power_off() <--- [X] At [X], the PHY is powered off, causing a disconnection. This quickly triggers a new connection and following re-enumeration, but any connection that had been established during the 6 seconds is broken. The code already checks for !rport->suspended (which, somewhat counter-intuitively, means the PHY is powered on), so add a guard for VBUS as well to avoid a disconnection when a cable is connected. Fixes: 98898f3bc83c ("phy: rockchip-inno-usb2: support otg-port for rk3399") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/ Signed-off-by: Louis Chauvet Co-developed-by: Luca Ceresoli Signed-off-by: Luca Ceresoli Reviewed-by: Théo Lebrun Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-1-dac8a02cd2ca@bootlin.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

phy: broadcom: ns-usb3: Fix Wvoid-pointer-to-enum-cast warning (again)

2026-02-06T15:41:47Z

[ Upstream commit fb21116099bbea1fc59efa9207e63c4be390ab72 ] "family" is an enum, thus cast of pointer on 64-bit compile test with clang W=1 causes: phy-bcm-ns-usb3.c:206:17: error: cast to smaller integer type 'enum bcm_ns_family' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] This was already fixed in commit bd6e74a2f0a0 ("phy: broadcom: ns-usb3: fix Wvoid-pointer-to-enum-cast warning") but then got bad in commit 21bf6fc47a1e ("phy: Use device_get_match_data()"). Note that after various discussions the preferred cast is via "unsigned long", not "uintptr_t". Fixes: 21bf6fc47a1e ("phy: Use device_get_match_data()") Signed-off-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20251224115533.154162-2-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: stm32-usphyc: Fix off by one in probe()

2026-02-06T15:41:47Z

[ Upstream commit cabd25b57216ddc132efbcc31f972baa03aad15a ] The "index" variable is used as an index into the usbphyc->phys[] array which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys then it is one element out of bounds. The "index" comes from the device tree so it's data that we trust and it's unlikely to be wrong, however it's obviously still worth fixing the bug. Change the > to >=. Fixes: 94c358da3a05 ("phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)") Signed-off-by: Dan Carpenter Reviewed-by: Amelie Delaunay Link: https://patch.msgid.link/aTfHcMJK1wFVnvEe@stanley.mountain Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: broadcom: bcm63xx-usbh: fix section mismatches

2026-01-19T12:09:50Z

commit 356d1924b9a6bc2164ce2bf1fad147b0c37ae085 upstream. Platform drivers can be probed after their init sections have been discarded (e.g. on probe deferral or manual rebind through sysfs) so the probe function and match table must not live in init. Fixes: 783f6d3dcf35 ("phy: bcm63xx-usbh: Add BCM63xx USBH driver") Cc: stable@vger.kernel.org # 5.9 Cc: Álvaro Fernández Rojas Signed-off-by: Johan Hovold Reviewed-by: Neil Armstrong Link: https://patch.msgid.link/20251017054537.6884-1-johan@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0

2025-12-06T21:09:21Z

[ Upstream commit 8c7c19466c854fa86b82d2148eaa9bf0e6531423 ] The driver for the Rockchip MIPI CSI-2 DPHY uses GRF register offset value 0 to sort out undefined registers. However, the RK3588 CSIDPHY GRF this offset is perfectly fine (in fact, register 0 is the only one in this register file). Introduce a boolean variable to indicate valid registers and allow writes to register 0. Reviewed-by: Neil Armstrong Signed-off-by: Michael Riesch Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-4-a4f340a7f0cf@collabora.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: cadence: cdns-dphy: Enable lower resolutions in dphy

2025-12-06T21:09:21Z

[ Upstream commit 43bd2c44515f8ee5c019ce6e6583f5640387a41b ] Enable support for data lane rates between 80-160 Mbps cdns dphy as mentioned in TRM [0] by setting the pll_opdiv field to 16. This change enables lower resolutions like 640x480 at 60Hz. [0]: https://www.ti.com/lit/zip/spruil1 (Table 12-552. DPHY_TX_PLL_CTRL Register Field Descriptions) Reviewed-by: Udit Kumar Reviewed-by: Devarsh Thakkar Signed-off-by: Harikrishna Shenoy Link: https://lore.kernel.org/r/20250807052002.717807-1-h-shenoy@ti.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin