kernel/drivers/phy/ti, branch linux-5.1.y

phy: ti: usb2: fix OMAP_CONTROL_PHY dependency

2019-05-31T13:43:31Z

[ Upstream commit d41ce98a122c13ea77938af04ef06fb12ae0c69e ] With randconfig build testing on arm64, we can run into a configuration that has CONFIG_OMAP_CONTROL_PHY=m and CONFIG_OMAP_USB2=y, which in turn causes a link failure: drivers/phy/ti/phy-omap-usb2.o: In function `omap_usb_phy_power': phy-omap-usb2.c:(.text+0x17c): undefined reference to `omap_control_phy_power' I could not come up with a good way to correctly describe the relation of the two symbols, but if we just select CONFIG_OMAP_CONTROL_PHY during compile testing, we can no longer run into the broken configuration. Fixes: 6777cee3a872 ("phy: ti: usb2: Add support for AM654 USB2 PHY") Signed-off-by: Arnd Bergmann Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: ti-pipe3: fix missing bit-wise or operator when assigning val

2019-05-25T16:16:27Z

commit e6577cb5103b7ca7c0204c0c86ef4af8aa6288f6 upstream. There seems to be a missing bit-wise or operator when setting val, fix this by adding it in. Fixes: 2796ceb0c18a ("phy: ti-pipe3: Update pcie phy settings") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Colin Ian King Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

Merge tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2019-02-12T13:59:43Z

Kishon writes: phy: for 5.1 *) Add a new driver to support Armada 3700 COMPHY IP (supports SATA, USB3, PCIe) *) Add a new driver to support Armada UTMI PHY *) Add a new driver to support Cadence D-PHY *) Extend omap-usb2 PHY driver to be used for AM654 USB2 PHY *) Extend qcom-qmp PHY driver to be used for UFS PHY and USB3 PHY in Qualcomm MSM8998 *) Extend qcom-qusb2 PHY driver to support QUSB2 PHY in Qualcomm MSM8998 *) Remove module specific code that is present for drivers that can be only built-in *) Allow Freescale IMX8MQ USB to be used for multiple SoCs and not just i.MX8MQ *) Cleanups such as switch to SPDX identifier, use readl_poll_timeout macro, remove unused headers etc., Signed-off-by: Kishon Vijay Abraham I * tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (32 commits) phy: qcom-qmp: Add QMP UFS PHY support for msm8998 dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy phy: bcm-sr-pcie: Change operation when PIPEMUX=1 phy: Add Cadence D-PHY support dt-bindings: phy: Move the Cadence D-PHY bindings phy: dphy: Clarify lanes parameter documentation phy: dphy: Change units of wakeup and init parameters phy: dphy: Remove unused header MAINTAINERS: phy: fill Armada 3700 PHY drivers entry dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings phy: add A3700 UTMI PHY driver MAINTAINERS: phy: add entry for Armada 3700 COMPHY driver dt-bindings: phy: mvebu-comphy: extend the file to describe a3700 bindings phy: add A3700 COMPHY support phy: mvebu-cp110-comphy: fix port check in ->xlate() phy: armada375-usb2: switch to SPDX license identifier phy: make phy-armada375-usb2 explicitly non-modular phy: make phy-mvebu-sata explicitly non-modular phy: make phy-core explicitly non-modular phy: qcom-qusb2: Add QUSB2 PHY support for msm8998 ...

phy: ti: usb2: Add support for AM654 USB2 PHY

2019-02-07T05:40:41Z

Add support for the USB2 PHY on the AM654 SoC. Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Signed-off-by: Kishon Vijay Abraham I

phy: ti: Don't depend on OMAP_OCP2SCP

2019-02-07T05:40:38Z

TI_PIPE3 and OMAP_USB2 don't depend on OMAP_OCP2SCP for build. Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Signed-off-by: Kishon Vijay Abraham I

phy: ti: usb2: Fix logic on -EPROBE_DEFER

2019-02-07T05:40:37Z

If clk_get() returns -EPROBE_DEFER then we should just return instead of falling back to old clock name. Use clk_prepare_enable() and clk_disable_unprepare() instead of splitting up prepare/unprepare from enable/disable. Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I

Merge tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-01-25T22:57:09Z

Pull USB/PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 5.0-rc4. Nothing major at all, just the usual selection of USB gadget bugfixes, some new USB serial driver ids, some SPDX fixes, and some PHY driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: keyspan_usa: add proper SPDX lines for .h files USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE USB: leds: fix regression in usbport led trigger usb: chipidea: fix static checker warning for NULL pointer MAINTAINERS: email address update in MAINTAINERS entries USB: usbip: delete README file USB: serial: pl2303: add new PID to support PL2303TB usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing phy: ath79-usb: Fix the main reset name to match the DT binding phy: ath79-usb: Fix the power on error path phy: fix build breakage: add PHY_MODE_SATA phy: ti: ensure priv is not null before dereferencing it USB: serial: ftdi_sio: fix GPIO not working in autosuspend usb: gadget: Potential NULL dereference on allocation error usb: dwc3: gadget: Fix the uninitialized link_state when udc starts usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup usb: dwc3: gadget: synchronize_irq dwc irq in suspend USB: serial: simple: add Motorola Tetra TPG2200 device id

phy: ti: ensure priv is not null before dereferencing it

2019-01-16T12:30:54Z

Currently priv is being dereferenced before priv is being null checked. Fix this by moving the null check on priv before the dereference. Detected by CoverityScan, CID#1476018 ("Dereference before null check") Fixes: 92b58b34741f ("phy: ti: introduce phy-gmii-sel driver") Signed-off-by: Colin Ian King Signed-off-by: Kishon Vijay Abraham I

phy: ti: Fix compilation failures without REGMAP

2019-01-07T19:21:37Z

This driver requires regmap or the compile fails: drivers/phy/ti/phy-gmii-sel.c:43:27: error: array type has incomplete element type ‘struct reg_field’ const struct reg_field (*regfields)[PHY_GMII_SEL_LAST]; Add it to kconfig. Signed-off-by: Jason Gunthorpe Signed-off-by: David S. Miller

phy: ti: fix semicolon.cocci warnings

2018-12-12T04:31:52Z

drivers/phy/ti/phy-gmii-sel.c:91:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 1811851f4e73 ("phy: ti: introduce phy-gmii-sel driver") CC: Grygorii Strashko Signed-off-by: kbuild test robot Signed-off-by: Kishon Vijay Abraham I