kernel/drivers/phy/tegra/xusb-tegra124.c, branch linux-6.9.y

phy: tegra: xusb: Remove usb3 supply

2022-11-07T04:50:25Z

Remove redundant codes for getting the vbus supply of usb3 ports because we get and control the vbus supply by the companion usb2 ports Signed-off-by: Wayne Chang Signed-off-by: Haotien Hsu Reviewed-by: Jon Hunter Link: https://lore.kernel.org/r/20221005084031.2154251-1-haotienh@nvidia.com Signed-off-by: Vinod Koul

phy: tegra: Don't use device-managed API to allocate ports

2020-03-19T13:00:05Z

The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding

phy: tegra: Fix regulator leak

2020-03-19T13:00:04Z

Devices are created for each port of the XUSB pad controller. Each USB 2 and USB 3 port can potentially have an associated VBUS power supply that needs to be removed when the device is removed. Since port devices never bind to a driver, the driver core will not get to perform the cleanup of device-managed resources that usually happens on driver unbind. Now, the driver core will also perform device-managed resource cleanup for driver-less devices when they are released. However, when a device link is created between the regulator and the port device, as part of regulator_get(), the regulator takes a reference to the port device and prevents it from being released unless regulator_put() is called, which will never happen. Avoid this by using the non-device-managed API and manually releasing the regulator reference when the port is unregistered. Signed-off-by: Thierry Reding

Merge tag 'phy-for-5.2-rc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2019-07-01T10:11:43Z

Kishon writes: phy: for 5.2-rc *) Move Tegra124 PLL power supplies to be enabled by xusb-tegra124 *) Move Tegra210 PLL power supplies to be enabled by xusb-tegra210 *) Minor fixes: fix memory leaks at error path and addresses coverity. Signed-off-by: Kishon Vijay Abraham I * tag 'phy-for-5.2-rc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: tegra: xusb: Add Tegra210 PLL power supplies phy: tegra: xusb: Add Tegra124 PLL power supplies dt-bindings: phy: tegra-xusb: List PLL power supplies phy: usb: phy-brcm-usb: Remove sysfs attributes upon driver removal phy: renesas: rcar-gen2: Fix memory leak at error paths phy: qcom-qusb2: fix missing assignment of ret when calling clk_prepare_enable

phy: tegra: xusb: Add Tegra124 PLL power supplies

2019-06-12T10:05:44Z

The Tegra124 SoC has four inputs that consume power in order to supply the PLLs that drive the various USB, PCI and SATA pads. Signed-off-by: Thierry Reding Acked-by: Jon Hunter Tested-by: Jon Hunter Signed-off-by: Kishon Vijay Abraham I

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

2019-06-05T15:36:37Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman

phy: fix returnvar.cocci warnings

2016-11-18T12:49:16Z

Remove unneeded variables when "0" can be returned. Generated by: scripts/coccinelle/misc/returnvar.cocci Signed-off-by: Vivek Gautam Cc: Kishon Vijay Abraham I Signed-off-by: Kishon Vijay Abraham I

phy: Add Tegra XUSB pad controller support

2016-04-29T14:44:47Z

Add a new driver for the XUSB pad controller found on NVIDIA Tegra SoCs. This hardware block used to be exposed as a pin controller, but it turns out that this isn't a good fit. The new driver and DT binding much more accurately describe the hardware and are more flexible in supporting new SoC generations. Acked-by: Kishon Vijay Abraham I Signed-off-by: Thierry Reding