kernel/drivers/phy/freescale, branch linux-6.9.y

phy: freescale: imx8m-pcie: fix pcie link-up instability

2024-04-06T07:13:16Z

Leaving AUX_PLL_REFCLK_SEL at its reset default of AUX_IN (PLL clock) proves to be more stable on the i.MX 8M Mini. Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver") Signed-off-by: Marcel Ziswiler Reviewed-by: Richard Zhu Link: https://lore.kernel.org/r/20240322130646.1016630-2-marcel@ziswiler.com Signed-off-by: Vinod Koul

Merge tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2024-03-16T18:24:51Z

Pull phy updates from Vinod Koul: "New hardware support: - Qualcomm X1E80100 PCIe phy support, SM8550 PCIe1 PHY, SC7180 UFS PHY and SDM630 USBC support - Rockchip HDMI/eDP Combo PHY driver - Mediatek MT8365 CSI phy driver Updates: - Rework on Qualcomm phy PCS registers and type-c handling - Cadence torrent phy updates for multilink configuration - TI gmii resume support" * tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits) phy: constify of_phandle_args in xlate phy: ti: tusb1210: Define device IDs phy: ti: tusb1210: Use temporary variable for struct device phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver dt-bindings: phy: Add Rockchip HDMI/eDP Combo PHY schema phy: ti: gmii-sel: add resume support phy: mtk-mipi-csi: add driver for CSI phy dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink config for TI J7200 dt-bindings: phy: cadence-torrent: Add a separate compatible for TI J7200 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink configuration phy: cadence-torrent: Add PCIe(100MHz) + USXGMII(156.25MHz) multilink configuration dt-bindings: phy: cadence-torrent: Add optional input reference clock for PLL1 phy: qcom-qmp-ufs: Switch to devm_clk_bulk_get_all() API dt-bindings: phy: qmp-ufs: Fix PHY clocks phy: qcom: sgmii-eth: move PCS registers to separate header phy: qcom: sgmii-eth: use existing register definitions phy: qcom: qmp-usbc: drop has_pwrdn_delay handling phy: qcom: qmp: move common bits definitions to common header phy: qcom: qmp: split DP PHY registers to separate headers ...

phy: constify of_phandle_args in xlate

2024-02-23T12:13:14Z

The xlate callbacks are supposed to translate of_phandle_args to proper provider without modifying the of_phandle_args. Make the argument pointer to const for code safety and readability. Signed-off-by: Krzysztof Kozlowski Acked-by: Thierry Reding Acked-by: Linus Walleij Acked-by: Florian Fainelli #Broadcom Link: https://lore.kernel.org/r/20240217093937.58234-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul

phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes

2024-02-07T10:19:40Z

Devicetree spec lists only dashes as valid characters for alias names. Table 3.2: Valid characters for alias names, Devicee Specification, Release v0.4 Signed-off-by: Alexander Stein Fixes: 3fbae284887de ("phy: freescale: phy-fsl-imx8-mipi-dphy: Add i.MX8qxp LVDS PHY mode support") Link: https://lore.kernel.org/r/20240110093343.468810-1-alexander.stein@ew.tq-group.com Signed-off-by: Vinod Koul

phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared registers

2023-10-06T09:59:52Z

The protocol converter configuration registers PCC8, PCCC, PCCD (implemented by the driver), as well as others, control protocol converters from multiple lanes (each represented as a different struct phy). So, if there are simultaneous calls to phy_set_mode_ext() to lanes sharing the same PCC register (either for the "old" or for the "new" protocol), corruption of the values programmed to hardware is possible, because lynx_28g_rmw() has no locking. Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take the global spinlock from the phy_ops :: set_mode() implementation. There are no other callers which modify PCC registers. Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

phy: lynx-28g: lock PHY while performing CDR lock workaround

2023-10-06T09:59:52Z

lynx_28g_cdr_lock_check() runs once per second in a workqueue to reset the lane receiver if the CDR has not locked onto bit transitions in the RX stream. But the PHY consumer may do stuff with the PHY simultaneously, and that isn't okay. Block concurrent generic PHY calls by holding the PHY mutex from this workqueue. Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

phy: lynx-28g: cancel the CDR check work item on the remove path

2023-10-06T09:59:52Z

The blamed commit added the CDR check work item but didn't cancel it on the remove path. Fix this by adding a remove function which takes care of it. Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Ioana Ciornei Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed

2023-08-22T13:58:11Z

This adds an error message if getting vbus failed for some reason, -EPROBE_DEFER is handled appropriately as well and adds a nice information to debugfs. Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20230816080256.611380-1-alexander.stein@ew.tq-group.com Signed-off-by: Vinod Koul

phy: Explicitly include correct DT includes

2023-07-17T06:22:56Z

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring Acked-by: Marc Kleine-Budde # for drivers/phy/phy-can-transceiver.c Acked-by: Heiko Stuebner Acked-by: Sergio Paracuellos Link: https://lore.kernel.org/r/20230714174841.4061919-1-robh@kernel.org Signed-off-by: Vinod Koul

phy: fsl-imx8mp-usb: add support for phy tuning

2023-05-19T17:50:30Z

Add USB PHY parameter tuning for USB certifications. Reviewed-by: Haibo Chen Signed-off-by: Li Jun [j.zink: ported to v6.3-rc1 from NXP downstream repo + cleanups] Signed-off-by: Johannes Zink Link: https://lore.kernel.org/r/20230516-lustige-usb-phy-dinge-v2-2-3383a0de34ac@pengutronix.de Signed-off-by: Vinod Koul