kernel/drivers/phy/freescale/Kconfig, branch linux-6.9.y

phy: freescale: Add i.MX8qm Mixel LVDS PHY support

2022-07-08T05:13:20Z

Add Freescale i.MX8qm LVDS PHY support. The PHY IP is from Mixel, Inc. Signed-off-by: Liu Ying Link: https://lore.kernel.org/r/20220706034810.2352641-4-victor.liu@nxp.com Signed-off-by: Vinod Koul

phy: PHY_FSL_LYNX_28G should depend on ARCH_LAYERSCAPE

2022-03-29T15:45:16Z

Freescale Layerscape Lynx 28G SerDes PHYs are only present on Freescale/NXP Layerscape SoCs. Move PHY_FSL_LYNX_28G outside the block for ARCH_MXC, as the latter is meant for i.MX8 SoCs, which is a different family than Layerscape. Add a dependency on ARCH_LAYERSCAPE, to prevent asking the user about this driver when configuring a kernel without Layerscape SoC support. Fixes: 02e2af20f4f9f2aa ("Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc") Fixes: 8f73b37cf3fbda67 ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds

Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-03-28T19:27:35Z

Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...

phy: add support for the Layerscape SerDes 28G

2022-03-14T10:41:50Z

This patch adds a new generic PHY driver to support the Lynx 28G SerDes block found on some of the Layerscape SoCs such as LX2160A. At the moment, only the following Ethernet protocols are supported: SGMII/1000Base-X and 10GBaseR. SerDes lanes which are not running an Ethernet protocol or a currently supported Ethenet protocol will be left as it was configured through the RCW (Reset Configuration Word) at boot time. At probe time, the platform driver will read the current configuration of both PLLs found on a SerDes block and will determine what protocols are supported using that PLL. For example, if a PLL is configured to generate a clock net (frate) of 5GHz the only protocols sustained by that PLL are SGMII/1000Base-X (using a quarter of the full clock rate) and QSGMII using the full clock net frequency on the lane. On the .set_mode() callback, the PHY driver will first check if the requested operating mode (protocol) is even supported by the current PLL configuration and will error out if not. Then, the lane is reconfigured to run on the requested protocol. Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller

phy: freescale: i.MX8 PHYs should depend on ARCH_MXC && ARM64

2022-01-27T05:35:18Z

The Freescale/NXP i.MX8 USB3, MIPI DSI, and PCIE PHYs are only present on the NXP i.MX8 family of SoCs. Hence wrap the config symbols for these PHYs inside a check for ARCH_MXC && ARM64, to prevent asking the user about these drivers when configuring a kernel without NXP i.MX SoC family support. Signed-off-by: Geert Uytterhoeven Reviewed-by: Guido Günther Link: https://lore.kernel.org/r/393868affd830016d35f0d9aba32ccd7098c8073.1641987369.git.geert+renesas@glider.be Signed-off-by: Vinod Koul

phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver

2021-12-14T14:32:53Z

Add the standalone i.MX8 PCIe PHY driver. Signed-off-by: Richard Zhu Tested-by: Marcel Ziswiler Reviewed-by: Tim Harvey Tested-by: Tim Harvey Link: https://lore.kernel.org/r/1638432158-4119-6-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Vinod Koul

Merge tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2019-07-01T13:04:59Z

phy: for 5.3 *) Add a new PHY driver for Qualcomm PCIe2 PHY *) Add a new PHY driver for Mixel DPHY present in i.MX8 *) Fix Qualcomm QMP UFS PHY driver from incorrectly reporting that PHY enable failed *) Fix _BUG_ on Amlogic G12A USB3 + PCIE Combo PHY Driver due to calling a sleeping function from invalid context *) Fix WARN_ON dump on rcar-gen3-usb2 PHY driver caused due to imbalance powered flag *) Fix .cocci and sparse warnings Signed-off-by: Kishon Vijay Abraham I * tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: qcom-qmp: Raise qcom_qmp_phy_enable() polling delay phy: meson-g12a-usb3-pcie: disable locking for cr_regmap phy: Add driver for mixel mipi dphy found on NXP's i.MX8 SoCs dt-bindings: phy: Add documentation for mixel dphy dt-bindings: phy-pxa-usb: add bindings phy: renesas: rcar-gen3-usb2: fix imbalance powered flag phy: qcom-qmp: Drop useless msm8998_pciephy_cfg setting phy: qcom-qmp: Correct READY_STATUS poll break condition phy: ti: am654-serdes: Make serdes_am654_xlate() static phy: usb: phy-brcm-usb: Fix platform_no_drv_owner.cocci warnings phy: samsung: Use struct_size() in devm_kzalloc() phy: qcom: Add Qualcomm PCIe2 PHY driver dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY

phy: Add driver for mixel mipi dphy found on NXP's i.MX8 SoCs

2019-06-21T10:31:06Z

This adds support for the Mixel DPHY as found on i.MX8 CPUs but since this is an IP core it will likely be found on others in the future. So instead of adding this to the nwl host driver make it a generic PHY driver. The driver supports the i.MX8MQ. Support for i.MX8QM and i.MX8QXP can be added once the necessary system controller bits are in via mixel_dphy_devdata. Signed-off-by: Guido Günther Co-developed-by: Robert Chiras Signed-off-by: Robert Chiras Reviewed-by: Fabio Estevam Reviewed-by: Sam Ravnborg Signed-off-by: Kishon Vijay Abraham I

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

phy: freescale: Break dependency on SOC_IMX8MQ for USB PHY

2019-02-07T05:40:34Z

Since this is going to be used on more SoCs than just i.MX8MQ, make the dependency here more generic. Signed-off-by: Abel Vesa Reviewed-by: Dong Aisheng Signed-off-by: Kishon Vijay Abraham I