kernel/drivers/pci/controller/vmd.c, branch linux-6.9.y

Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-01-18T00:23:17Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Reserve ECAM so we don't assign it to PCI BARs; this works around bugs where BIOS included ECAM in a PNP0A03 host bridge window, didn't reserve it via a PNP0C02 motherboard device, and didn't allocate space for SR-IOV VF BARs (Bjorn Helgaas) - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas) - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas) - Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log bridges before downstream devices so the dmesg order is more logical (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen) - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc (Ilpo Järvinen) - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen) Resource management: - Restructure pci_dev_for_each_resource() to avoid computing the address of an out-of-bounds array element (the bounds check was performed later so the element was never actually *read*, but it's nicer to avoid even computing an out-of-bounds address) (Andy Shevchenko) Driver binding: - Convert pci-host-common.c platform .remove() callback to .remove_new() returning 'void' since it's not useful to return error codes here (Uwe Kleine-König) - Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) - Drop unused struct pci_driver.node member (Mathias Krause) Virtualization: - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) Error handling: - Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to match spec terminology (Bjorn Helgaas) - Decode Requester ID when no error info found instead of printing the raw hex value (Bjorn Helgaas) Endpoint framework: - Use a unique test pattern for each BAR in the pci_endpoint_test to make it easier to debug address translation issues (Niklas Cassel) Broadcom STB PCIe controller driver: - Add DT property "brcm,clkreq-mode" and driver support for different CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan) Freescale Layerscape PCIe controller driver: - Add suspend/resume support for Layerscape LS1043a and LS1021a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) MediaTek PCIe controller driver: - Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) Qualcomm PCIe controller driver: - Increase qcom iommu-map maxItems to accommodate SDX55 (five entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski) - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof Kozlowski) - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof Kozlowski) - Correct the qcom "reset-name" property, previously incorrectly called "reset-names" (Krzysztof Kozlowski) - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil Armstrong) Renesas R-Car PCIe controller driver: - Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) SiFive FU740 PCIe controller driver: - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) Synopsys DesignWare PCIe controller driver: - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) TI J721E PCIe driver: - Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) TI Keystone PCIe controller driver: - Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) Xilinx XDMA PCIe controller driver: - Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) MicroSemi Switchtec management driver: - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm ioremapping in switchtec_pci_probe(). Previously the cleanup was done in stdev_release(), which used stale pointers if stdev->cdev happened to be open when the PCI device was removed (Daniel Stodden) Miscellaneous: - Convert interrupt terminology from "legacy" to "INTx" to be more specific and match spec terminology (Damien Le Moal) - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)" * tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Fix kernel-doc issues PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler PCI: keystone: Fix race condition when initializing PHYs PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members misc: pci_endpoint_test: Use a unique test pattern for each BAR PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI/AER: Use explicit register sizes for struct members PCI/AER: Decode Requester ID when no error info found PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors ...

PCI: vmd: Remove usage of the deprecated ida_simple_xx() API

2023-12-13T19:23:35Z

ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Link: https://lore.kernel.org/linux-pci/270f25cdc154f3b0309e57b2f6421776752e2170.1702230593.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET Signed-off-by: Krzysztof Wilczyński

PCI: vmd: Fix potential deadlock when enabling ASPM

2023-12-11T18:07:59Z

The vmd_pm_enable_quirk() helper is called from pci_walk_bus() during probe to enable ASPM for controllers with VMD_FEAT_BIOS_PM_QUIRK set. Since pci_walk_bus() already holds a pci_bus_sem read lock, use pci_enable_link_state_locked() to enable link states in order to avoid a potential deadlock (e.g. in case someone takes a write lock before reacquiring the read lock). Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR") Link: https://lore.kernel.org/r/20231128081512.19387-3-johan+linaro@kernel.org Signed-off-by: Johan Hovold [bhelgaas: add "potential" in subject since the deadlock has only been reported by lockdep, include helper name in commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam Cc: # 6.3 Cc: Michael Bottini Cc: David E. Box

Merge branch 'pci/controller/vmd'

2023-10-28T18:31:02Z

- Fix space/tab whitespace issue (Xinghui Li) * pci/controller/vmd: PCI: vmd: Fix inconsistent indentation in vmd_resume()

PCI: Use PCI_HEADER_TYPE_* instead of literals

2023-10-03T16:55:59Z

Replace literals under drivers/pci/ with PCI_HEADER_TYPE_MASK, PCI_HEADER_TYPE_NORMAL, and PCI_HEADER_TYPE_MFD. Also replace !! boolean conversions with FIELD_GET(). Link: https://lore.kernel.org/r/20231003125300.5541-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Reviewed-by: Wolfram Sang # for Renesas R-Car

PCI: vmd: Correct PCI Header Type Register's multi-function check

2023-10-03T16:54:47Z

vmd_domain_reset() attempts to find whether the device may contain multiple functions by checking 0x80 (Multi-Function Device), however, the hdr_type variable has already been masked with PCI_HEADER_TYPE_MASK so the check can never true. To fix the issue, don't mask the read with PCI_HEADER_TYPE_MASK. Fixes: 6aab5622296b ("PCI: vmd: Clean up domain before enumeration") Link: https://lore.kernel.org/r/20231003125300.5541-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Cc: Nirmal Patel

PCI: vmd: Fix inconsistent indentation in vmd_resume()

2023-09-18T14:08:30Z

The if-statement within the vmd_resume() function has an inconsistent indentation that leads to a compile time warning. Thus, correct the inconsistent indentation. While at it, remove the if-statement completely, which will make the code simpler. This was detected by Smatch: drivers/pci/controller/vmd.c:1066 vmd_resume() warn: inconsistent indenting No functional changes are intended. [kwilczynski: use correct tags, commit log] Suggested-by: Christoph Hellwig Link: https://lore.kernel.org/linux-pci/20230627113808.269716-1-korantwork@gmail.com Reported-by: Dan Carpenter Signed-off-by: Xinghui Li Signed-off-by: Krzysztof Wilczyński

PCI: vmd: Disable bridge window for domain reset

2023-08-22T09:09:42Z

During domain reset process vmd_domain_reset() clears PCI configuration space of VMD root ports. But certain platform has observed following errors and failed to boot. ... DMAR: VT-d detected Invalidation Queue Error: Reason f DMAR: VT-d detected Invalidation Time-out Error: SID ffff DMAR: VT-d detected Invalidation Completion Error: SID ffff DMAR: QI HEAD: UNKNOWN qw0 = 0x0, qw1 = 0x0 DMAR: QI PRIOR: UNKNOWN qw0 = 0x0, qw1 = 0x0 DMAR: Invalidation Time-out Error (ITE) cleared The root cause is that memset_io() clears prefetchable memory base/limit registers and prefetchable base/limit 32 bits registers sequentially. This seems to be enabling prefetchable memory if the device disabled prefetchable memory originally. Here is an example (before memset_io()): PCI configuration space for 10000:00:00.0: 86 80 30 20 06 00 10 00 04 00 04 06 00 00 01 00 00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 20 00 00 00 00 01 00 01 00 ff ff ff ff 75 05 00 00 ... So, prefetchable memory is ffffffff00000000-575000fffff, which is disabled. When memset_io() clears prefetchable base 32 bits register, the prefetchable memory becomes 0000000000000000-575000fffff, which is enabled and incorrect. Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec: The Prefetchable Memory Limit register must be programmed to a smaller value than the Prefetchable Memory Base register if there is no prefetchable memory on the secondary side of the bridge. This is believed to be the reason for the failure and in addition the sequence of operation in vmd_domain_reset() is not following the PCIe specs. Disable the bridge window by executing a sequence of operations borrowed from pci_disable_bridge_window() and pci_setup_bridge_io(), that comply with the PCI specifications. Link: https://lore.kernel.org/r/20230810215029.1177379-1-nirmal.patel@linux.intel.com Signed-off-by: Nirmal Patel Signed-off-by: Lorenzo Pieralisi

PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()

2023-06-24T16:09:16Z

The ret variable in the vmd_enable_domain() function was used uninitialized when printing a warning message upon failure of the pci_reset_bus() function. Thus, fix the issue by assigning ret with the value returned from pci_reset_bus() before referencing it in the warning message. This was detected by Smatch: drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'. [kwilczynski: drop the second patch from the series, add missing reported by tag, commit log] Fixes: 0a584655ef89 ("PCI: vmd: Fix secondary bus reset for Intel bridges") Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Xinghui Li Signed-off-by: Krzysztof Wilczyński Reviewed-by: Nirmal Patel

PCI: vmd: Reset VMD config register between soft reboots

2023-05-08T07:17:13Z

VMD driver can disable or enable MSI remapping by changing VMCONFIG_MSI_REMAP register. This register needs to be set to the default value during soft reboots. Drives failed to enumerate when Windows boots after performing a soft reboot from Linux. Windows doesn't support MSI remapping disable feature and stale register value hinders Windows VMD driver initialization process. Adding vmd_shutdown function to make sure to set the VMCONFIG register to the default value. Link: https://lore.kernel.org/r/20230224202811.644370-1-nirmal.patel@linux.intel.com Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible") Signed-off-by: Nirmal Patel Signed-off-by: Lorenzo Pieralisi Reviewed-by: Jon Derrick