kernel/drivers/pci/controller/pcie-mediatek.c, branch linux-rolling-stable

PCI: mediatek: Fix IRQ domain leak when MSI allocation fails

2026-02-26T23:01:04Z

[ Upstream commit 7f0cdcddf8bef1c8c18f9be6708073fd3790a20f ] In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains() fails after port->irq_domain has been successfully created via irq_domain_create_linear(), the function returns directly without cleaning up the allocated IRQ domain, resulting in a resource leak. Add irq_domain_remove() call in the error path to properly release the INTx IRQ domain before returning the error. Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: Haotian Zhang Signed-off-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn Signed-off-by: Sasha Levin

PCI: mediatek: Add support for Airoha AN7583 SoC

2025-10-21T01:59:56Z

Add support for the second PCIe Root Complex present on Airoha AN7583 SoC. This is based on the Mediatek Gen1/2 PCIe driver and similar to Gen3 also require workaround for the reset signals. Introduce a new quirk to skip having to reset signals and also introduce some additional logic to configure the PBUS registers required for Airoha SoC. Signed-off-by: Christian Marangi Signed-off-by: Manivannan Sadhasivam Reviewed-by: AngeloGioacchino Del Regno Link: https://patch.msgid.link/20251020111121.31779-6-ansuelsmth@gmail.com

PCI: mediatek: Use generic MACRO for TPVPERL delay

2025-10-21T01:59:34Z

Use the generic PCI MACRO for TPVPERL delay to wait for clock and power stabilization after PERST# Signal instead of the raw value of 100 ms. Signed-off-by: Christian Marangi Signed-off-by: Manivannan Sadhasivam Reviewed-by: AngeloGioacchino Del Regno Link: https://patch.msgid.link/20251020111121.31779-5-ansuelsmth@gmail.com

PCI: mediatek: Convert bool to single quirks entry and bitmap

2025-10-21T01:59:19Z

To clean Mediatek SoC PCIe struct, convert all the bool to a bitmap and use a single quirks to reference all the values. This permits cleaner addition of new quirk without having to define a new bool in the struct. Signed-off-by: Christian Marangi Signed-off-by: Manivannan Sadhasivam Reviewed-by: AngeloGioacchino Del Regno Link: https://patch.msgid.link/20251020111121.31779-4-ansuelsmth@gmail.com

PCI: mediatek: Switch to msi_create_parent_irq_domain()

2025-07-24T21:24:16Z

Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain() which was using legacy MSI domain setup. Signed-off-by: Nam Cao [mani: reworded commit message] Signed-off-by: Manivannan Sadhasivam [bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var] Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Gleixner Link: https://patch.msgid.link/76f6e6ce6021607cd0fdfd79fef7d2eb69d9f361.1750858083.git.namcao@linutronix.de

PCI: controller: Use dev_fwnode() instead of of_fwnode_handle()

2025-07-24T21:00:47Z

All irq_domain functions now accept fwnode instead of of_node. But many PCI controllers still extract dev to of_node and then of_node to fwnode. Instead, clean this up and simply use the dev_fwnode() helper to extract fwnode directly from dev. Internally, it still does dev => of_node => fwnode steps, but it's now hidden from the users. In the case of altera, this also removes an unused 'node' variable that is only used when CONFIG_OF is enabled: drivers/pci/controller/pcie-altera.c: In function 'altera_pcie_init_irq_domain': drivers/pci/controller/pcie-altera.c:855:29: error: unused variable 'node' [-Werror=unused-variable] 855 | struct device_node *node = dev->of_node; Signed-off-by: Jiri Slaby (SUSE) Signed-off-by: Arnd Bergmann # altera [bhelgaas: squash together, rebase to precede msi-parent] Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/20250521163329.2137973-1-arnd@kernel.org Link: https://patch.msgid.link/20250611104348.192092-16-jirislaby@kernel.org Link: https://patch.msgid.link/20250723065907.1841758-1-jirislaby@kernel.org

PCI: Switch to irq_domain_create_linear()

2025-05-16T19:06:10Z

irq_domain_add_linear() is going away as being obsolete now. Switch to the preferred irq_domain_create_linear(). That differs in the first parameter: It takes more generic struct fwnode_handle instead of struct device_node. Therefore, of_fwnode_handle() is added around the parameter. Note some of the users can likely use dev->fwnode directly instead of indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not guaranteed to be set for all, so this has to be investigated on case to case basis (by people who can actually test with the HW). [ tglx: Fix up subject prefix and convert the new instance in dwc/pcie-amd-mdb.c ] Signed-off-by: Jiri Slaby (SUSE) Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20250319092951.37667-30-jirislaby@kernel.org

irqdomain: pci: Switch to of_fwnode_handle()

2025-04-07T17:15:14Z

of_node_to_fwnode() is irqdomain's reimplementation of the "officially" defined of_fwnode_handle(). The former is in the process of being removed, so use the latter instead. Signed-off-by: Jiri Slaby (SUSE) Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/20250319092951.37667-8-jirislaby@kernel.org

PCI: mediatek: Use helper function for_each_available_child_of_node_scoped()

2025-03-06T09:31:45Z

The for_each_available_child_of_node_scoped() helper provides a scope-based clean-up functionality to put the device_node automatically, and as such, there is no need to call of_node_put() directly. Thus, use this helper to simplify the code. Signed-off-by: Zhang Zekun Reviewed-by: Jonathan Cameron Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240831040413.126417-4-zhangzekun11@huawei.com [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński

PCI: controller: Switch back to struct platform_driver::remove()

2024-10-03T21:44:49Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all PCI controller drivers to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Link: https://lore.kernel.org/r/20240923065706.728769-1-sergio.paracuellos@gmail.com Signed-off-by: Sergio Paracuellos [bhelgaas: add pcie-xilinx-nwl.c and tidy whitespace per Uwe Kleine-König: https://lore.kernel.org/r/tdxrmmqyzcufupnwkdbg7lwgadizm7v3lxjirykijbml7x54ze@upbdzycdsilm] Signed-off-by: Bjorn Helgaas