kernel/drivers/pci/controller/dwc/pcie-designware.h, branch linux-6.9.y

Merge branch 'pci/irq-clean-up'

2024-01-15T18:10:40Z

- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit and match spec terminology (Bjorn Helgaas) - Use existing PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX in artpec6, cadence, designware, designware-plat, dra7xx, imx6, keembay, keystone, layerscape, mhi, ntb, qcom, rcar, rcar-gen4, rockchip, tegra194, uniphier, vntb; drop the redundant pci_epc_irq_type enum with the same values (Damien Le Moal) - Use "intx" instead of "leg" or "legacy" when describing INTx interrupts in endpoint core, endpoint tests, cadence, dra7xx, designware, dw-rockchip, dwc core, imx6, keystone, layerscape, qcom, rcar-gen4, rockchip, tegra194, uniphier, xilinx-nwl (Damien Le Moal) * pci/irq-clean-up: PCI: xilinx-nwl: Use INTX instead of legacy PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler() PCI: rockchip-ep: Use INTX instead of legacy PCI: uniphier: Use INTX instead of legacy PCI: tegra194: Use INTX instead of legacy PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler() PCI: keystone: Use INTX instead of legacy PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq() PCI: cadence: Use INTX instead of legacy PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq() misc: pci_endpoint_test: Use INTX instead of LEGACY PCI: endpoint: Rename LEGACY to INTX in test function driver PCI: endpoint: Use INTX instead of legacy PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX

PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers

2024-01-06T07:51:09Z

The current code calculated some dbi[2] registers' offset by calling dw_pcie_ep_get_dbi[2]_offset() in each function. To improve the code readability, add dw_pcie_ep_{read,write}_dbi[2} and some data-width related helpers. Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda Signed-off-by: Krzysztof Wilczyński Reviewed-by: Serge Semin Reviewed-by: Manivannan Sadhasivam

PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops

2024-01-06T07:51:08Z

Since the struct member .func_conf_select makes the intentions behind it difficult to ascertain from its name alone, rename it to .get_dbi_offset to make the intended usage more obvious. [kwilczynski: commmit log] Suggested-by: Manivannan Sadhasivam Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-4-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Reviewed-by: Serge Semin

PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops

2024-01-06T07:51:08Z

Since the name of the dw_pcie_ep_ops struct makes it obvious that it's for the PCIe Endpoint, rename the struct member .ep_init to .init. [kwilczynski: commit log] Suggested-by: Serge Semin Suggested-by: Manivannan Sadhasivam Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Reviewed-by: Serge Semin Reviewed-by: Srikanth Thokala Acked-by: Jesper Nilsson Acked-by: Kunihiko Hayashi

PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members

2024-01-06T07:51:08Z

Since the name of the dw_pcie_host_ops struct makes it obvious that it's for the PCIe Host, drop the host prefix from the struct members. [kwilczynski: commit log] Suggested-by: Serge Semin Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Reviewed-by: Serge Semin Reviewed-by: Thomas Petazzoni Acked-by: Heiko Stuebner Acked-by: Jesper Nilsson Acked-by: Kunihiko Hayashi Acked-by: Lei Chuanhua Acked-by: Nobuhiro Iwamatsu

PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq()

2023-12-19T08:36:42Z

Rename the function dw_pcie_ep_raise_legacy_irq() of the Designware endpoint controller driver to dw_pcie_ep_raise_intx_irq() to match the name of the PCI_IRQ_INTX macro. Link: https://lore.kernel.org/r/20231122060406.14695-10-dlemoal@kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Lorenzo Pieralisi Reviewed-by: Serge Semin Reviewed-by: Christoph Hellwig

PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions

2023-12-18T10:55:56Z

linux/pci.h defines the IRQ flags PCI_IRQ_INTX, PCI_IRQ_MSI and PCI_IRQ_MSIX. Let's use these flags directly instead of the endpoint definitions provided by enum pci_epc_irq_type. This removes the need for defining this enum type completely. Link: https://lore.kernel.org/r/20231122060406.14695-3-dlemoal@kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Lorenzo Pieralisi Reviewed-by: Serge Semin Reviewed-by: Christoph Hellwig Acked-by: Manivannan Sadhasivam

Merge branch 'pci/controller/rcar'

2023-10-28T18:31:01Z

- Add generic T_PVPERL macro for the required interval between power being stable and PERST# being inactive (Yoshihiro Shimoda) - Factor out dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda) - Update PCI_EXP_LNKCAP_MLW so Link Capabilities shows the correct max link width (Yoshihiro Shimoda) - Drop tegra194 PCI_EXP_LNKCAP_MLW setting since dw_pcie_setup() already does it (Yoshihiro Shimoda) - Add dwc support for different dbi and dbi2 register offsets, to be used for R-Car Gen4 controllers (Yoshihiro Shimoda) - Add EDMA_UNROLL capability flag for R-Car Gen4 controllers that don't correctly advertise unrolled mapping via their eDMA CTRL register (Yoshihiro Shimoda) - Export dw_pcie_ep_exit() for use by the modular R-Car Gen4 driver (Yoshihiro Shimoda) - Add .pre_init() and .deinit() hooks for use by R-Car Gen4 controllers (Yoshihiro Shimoda) - Increase snps,dw-pcie DT reg and reg-names maxItems for R-Car Gen4 controllers (Yoshihiro Shimoda) - Add rcar-gen4-pci host and endpoint DT bindings and drivers (Yoshihiro Shimoda) - Add Renesas R8A779F0 Device ID to pci_endpoint_test to allow testing on R-Car S4-8 (Yoshihiro Shimoda) * pci/controller/rcar: misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4 PCI: rcar-gen4: Add endpoint mode support PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host dt-bindings: PCI: dwc: Update maxItems of reg and reg-names PCI: dwc: endpoint: Introduce .pre_init() and .deinit() PCI: dwc: Expose dw_pcie_write_dbi2() to module PCI: dwc: Expose dw_pcie_ep_exit() to module PCI: dwc: Add EDMA_UNROLL capability flag PCI: dwc: endpoint: Add multiple PFs support for dbi2 PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling PCI: dwc: Add dw_pcie_link_set_max_link_width() PCI: Add T_PVPERL macro

PCI: dwc: endpoint: Introduce .pre_init() and .deinit()

2023-10-23T12:40:09Z

Renesas R-Car Gen4 PCIe controllers require vendor-specific initialization before .init(). To use dw->dbi and dw->num-lanes in the initialization code, introduce .pre_init() into struct dw_pcie_ep_ops. While at it, also introduce .deinit() to disable the controller by using vendor-specific de-initialization. Note that the ep_init in the struct dw_pcie_ep_ops should be renamed to init later. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-9-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Reviewed-by: Serge Semin

PCI: dwc: Add EDMA_UNROLL capability flag

2023-10-20T12:12:56Z

Renesas R-Car Gen4 PCIe controllers have an unexpected register value in the eDMA CTRL register. So, add a new capability flag "EDMA_UNROLL" which would force the unrolled eDMA mapping for the problematic device. Suggested-by: Serge Semin Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-7-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Reviewed-by: Serge Semin