kernel/drivers/pci/controller/dwc/Kconfig, branch linux-6.5.y

PCI: dwc: Sort Kconfig entries by vendor

2023-04-20T21:18:05Z

Sort Kconfig entries by vendor so they appear in alphabetical order in menuconfig. Link: https://lore.kernel.org/r/20230418174336.145585-7-helgaas@kernel.org Signed-off-by: Bjorn Helgaas

PCI: Use consistent controller Kconfig menu entry language

2023-04-20T21:18:04Z

Use "PCIe controller" consistently instead of "host bridge", "bus driver", etc. Annotate with "(host mode)" or "(endpoint mode)" as needed. Link: https://lore.kernel.org/r/20230418174336.145585-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas

PCI: meson: Add 'Amlogic' to Kconfig prompt

2023-04-20T21:18:04Z

Add the "Amlogic" vendor name to the CONFIG_PCI_MESON Kconfig prompt to match other PCIe drivers. Capitalize "Meson" to match other Meson Kconfig prompts. Link: https://lore.kernel.org/r/20230418174336.145585-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas Cc: Yue Wang

PCI: kirin: Select REGMAP_MMIO

2023-03-10T10:22:24Z

pcie-kirin uses regmaps, and needs to pull them in; otherwise, with CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces a linker failure looking for __devm_regmap_init_mmio_clk(). Fixes: d19afe7be126 ("PCI: kirin: Use regmap for APB registers") Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org Signed-off-by: Josh Triplett [lpieralisi@kernel.org: commit log and removed REGMAP select] Signed-off-by: Lorenzo Pieralisi Cc: stable@vger.kernel.org # 5.16+

Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2023-02-25T00:51:40Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Rework portdrv shutdown so it disables interrupts but doesn't disable bus mastering, which leads to hangs on Loongson LS7A - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases, again to avoid hardware issues on Loongson LS7A (and likely other devices based on DesignWare IP) - Ignore devices with a firmware (DT or ACPI) node that says the device is disabled Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. Tried this in v6.1 but had to revert for regressions, so try again - Fix root bus issue that dropped resources that happened to end at 0, e.g., [bus 00] PCI device hotplug: - Remove device locking when marking device as disconnected so this doesn't have to wait for concurrent driver bind/unbind to complete - Quirk more Qualcomm bridges that don't fully implement the PCIe Slot Status 'Command Completed' bit Power management: - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we don't miss hot-add notifications for USB4 docks, Thunderbolt, etc Reset: - Observe delay after reset, e.g., resuming from system sleep, regardless of whether a bridge can suspend to D3cold at runtime - Wait for secondary bus to become ready after a bridge reset Virtualization: - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work - Allow independent IOMMU groups for some Wangxun NICs that prevent peer-to-peer transactions but don't advertise an ACS Capability Error handling: - Configure End-to-End-CRC (ECRC) only if Linux owns the AER Capability - Remove redundant Device Control Error Reporting Enable in the AER service driver since this is already done for all devices during enumeration ASPM: - Add pci_enable_link_state() interface to allow drivers to enable ASPM link state Endpoint framework: - Move dra7xx and tegra194 linkup processing from hard IRQ to threaded IRQ handler - Add a separate lock for endpoint controller list of endpoint function drivers to prevent deadlock in callbacks - Pass events from endpoint controller to endpoint function drivers via callbacks instead of notifiers Synopsys DesignWare eDMA controller driver (acked by Vinod): - Fix CPU vs PCI address issues - Fix source vs destination address issues - Fix issues with interleaved transfer semantics - Fix channel count initialization issue (issue still exists in several other drivers) - Clean up and improve debugfs usage so it will work on platforms with several eDMA devices Baikal T-1 PCIe controller driver: - Set a 64-bit DMA mask Freescale i.MX6 PCIe controller driver: - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support Intel VMD host bridge driver: - Add quirk to configure PCIe ASPM and LTR. This is normally done by BIOS, and will be for future products Marvell MVEBU PCIe controller driver: - Mark this driver as broken in Kconfig since bugs prevent its daily usage MediaTek MT7621 PCIe controller driver: - Delay PHY port initialization to improve boot reliability for ZBT WE1326, ZBT WF3526-P, and some Netgear models Qualcomm PCIe controller driver: - Add MSM8998 DT compatible string - Unify MSM8996 and MSM8998 clock orderings - Add SM8350 DT binding and driver support - Add IPQ8074 Gen3 DT binding and driver support - Correct qcom,perst-regs in DT binding - Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and clocks are disabled on late host-init errors Socionext UniPhier Pro5 controller driver: - Clean up uniphier-ep reg, clocks, resets, and their names in DT binding Synopsys DesignWare PCIe controller driver: - Restrict coherent DMA mask to 32 bits for MSI, but allow controller drivers to set 64-bit streaming DMA mask - Add eDMA engine support in both Root Port and Endpoint controllers Miscellaneous: - Remove MODULE_LICENSE from boolean drivers so they don't look like modules so modprobe can complain about them" * tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits) PCI: dwc: Add Root Port and Endpoint controller eDMA engine support PCI: bt1: Set 64-bit DMA mask PCI: dwc: Restrict only coherent DMA mask for MSI address allocation dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it dmaengine: dw-edma: Add mem-mapped LL-entries support PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules PCI: hv: Drop duplicate PCI_MSI dependency PCI/P2PDMA: Annotate RCU dereference PCI/sysfs: Constify struct kobj_type pci_slot_ktype PCI: hotplug: Allow marking devices as disconnected during bind/unbind PCI: pciehp: Add Qualcomm quirk for Command Completed erratum PCI: qcom: Add IPQ8074 Gen3 port support dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port dt-bindings: PCI: qcom: Sort compatibles alphabetically PCI: qcom: Fix host-init error handling PCI: qcom: Add SM8350 support dt-bindings: PCI: qcom: Add SM8350 dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order ...

PCI: imx6: Add i.MX PCIe EP mode support

2023-01-16T09:41:59Z

i.MX PCIe is one dual mode PCIe controller. Add i.MX PCIe EP mode support here, and split the PCIe modes to the Root Complex mode and Endpoint mode. Link: https://lore.kernel.org/r/1673847684-31893-12-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu Signed-off-by: Lorenzo Pieralisi

PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN

2023-01-04T12:06:52Z

a474d3fbe287 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed PCI_MSI_IRQ_DOMAIN and changed all references to refer to PCI_MSI instead. ba6ed462dcf4 ("PCI: dwc: Add Baikal-T1 PCIe controller support") independently added PCIE_BT1, depending on PCI_MSI_IRQ_DOMAIN. Both commits appeared in v6.2-rc1, so the latter missed the conversion from PCI_MSI_IRQ_DOMAIN to PCI_MSI. Update PCIE_BT1 to depend on PCI_MSI instead. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20221215103452.23131-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Serge Semin

Merge tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2022-12-14T17:54:10Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and make more things static. - Make portdrv bind to Switch Ports that have AER. Previously, if these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant the Ports couldn't be suspended to low-power states. AER on these Ports doesn't use interrupts, and the AER driver doesn't need to claim them. - Assign PCI domain IDs using ida_alloc(), which makes host bridge add/remove work better. Resource management: - To work better with recent BIOSes that use EfiMemoryMappedIO for PCI host bridge apertures, remove those regions from the E820 map (E820 entries normally prevent us from allocating BARs). In v5.19, we added some quirks to disable E820 checking, but that's not very maintainable. EfiMemoryMappedIO means the OS needs to map the region for use by EFI runtime services; it shouldn't prevent OS from using it. PCIe native device hotplug: - Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4 PCIe tunneling depends on native PCIe hotplug. - Enable Command Completed Interrupt only if supported to avoid user confusion from lspci output that says this is enabled but not supported. - Prevent pciehp from binding to Switch Upstream Ports; this happened because of interaction with acpiphp and caused devices below the Upstream Port to disappear. Power management: - Convert AGP drivers to generic power management. We hope to remove legacy power management from the PCI core eventually. Virtualization: - Fix pci_device_is_present(), which previously always returned "false" for VFs, causing virtio hangs when unbinding the driver. Miscellaneous: - Convert drivers to gpiod API to prepare for dropping some legacy code. - Fix DOE fencepost error for the maximum data object length. Baikal-T1 PCIe controller driver: - Add driver and DT bindings. Broadcom STB PCIe controller driver: - Enable Multi-MSI. - Delay 100ms after PERST# deassert to allow power and clocks to stabilize. - Configure Read Completion Boundary to 64 bytes. Freescale i.MX6 PCIe controller driver: - Initialize PHY before deasserting core reset to fix a regression in v6.0 on boards where the PHY provides the reference. - Fix imx6sx and imx8mq clock names in DT schema. Intel VMD host bridge driver: - Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe SSDs in VT-d pass-through scenarios. - Disable MSI remapping, which gets re-enabled by firmware during suspend/resume. MediaTek PCIe Gen3 controller driver: - Add MT7986 and MT8195 support. Qualcomm PCIe controller driver: - Add SC8280XP/SA8540P basic interconnect support. Rockchip DesignWare PCIe controller driver: - Base DT schema on common Synopsys schema. Synopsys DesignWare PCIe core: - Collect DT items shared between Root Port and Endpoint (PERST GPIO, PHY info, clocks, resets, link speed, number of lanes, number of iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml. - Add dma-ranges support for Root Ports and Endpoints. - Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to reduce code duplication. - Add generic names for clocks and resets to encourage more consistent naming across drivers using DesignWare IP. - Stop advertising PTM Responder role for Endpoints, which aren't allowed to be responders. TI J721E PCIe driver: - Add j721s2 host mode ID to DT schema. - Add interrupt properties to DT schema. Toshiba Visconti PCIe controller driver: - Fix interrupts array max constraints in DT schema" * tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits) x86/PCI: Use pr_info() when possible x86/PCI: Fix log message typo x86/PCI: Tidy E820 removal messages PCI: Skip allocate_resource() if too little space available efi/x86: Remove EfiMemoryMappedIO from E820 map PCI/portdrv: Allow AER service only for Root Ports & RCECs PCI: xilinx-nwl: Fix coding style violations PCI: mvebu: Switch to using gpiod API PCI: pciehp: Enable Command Completed Interrupt only if supported PCI: aardvark: Switch to using devm_gpiod_get_optional() dt-bindings: PCI: mediatek-gen3: add support for mt7986 dt-bindings: PCI: mediatek-gen3: add SoC based clock config dt-bindings: PCI: qcom: Allow 'dma-coherent' property PCI: mt7621: Add sentinel to quirks table PCI: vmd: Fix secondary bus reset for Intel bridges PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32) PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path ...

PCI: dwc: Add Baikal-T1 PCIe controller support

2022-11-23T15:01:55Z

Baikal-T1 SoC is equipped with DWC PCIe v4.60a host controller. It can be trained to work up to Gen.3 speed over up to x4 lanes. The host controller is attached to the DW PCIe 3.0 PCS via the PIPE-4 interface, which in its turn is connected to the DWC 10G PHY. The whole system is supposed to be fed up with four clock sources: DBI peripheral clock, AXI application clocks and external PHY/core reference clock generating the 100MHz signal. In addition to that the platform provide a way to reset each part of the controller: sticky/non-sticky bits, host controller core, PIPE interface, PCS/PHY and Hot/Power reset signal. The driver also provides a way to handle the GPIO-based PERST# signal. Note due to the Baikal-T1 MMIO peculiarity we have to implement the DBI interface accessors which make sure the IO operations are dword-aligned. Link: https://lore.kernel.org/r/20221113191301.5526-21-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin Signed-off-by: Lorenzo Pieralisi

PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN

2022-11-17T14:15:19Z

What a zoo: PCI_MSI select GENERIC_MSI_IRQ PCI_MSI_IRQ_DOMAIN def_bool y depends on PCI_MSI select GENERIC_MSI_IRQ_DOMAIN Ergo PCI_MSI enables PCI_MSI_IRQ_DOMAIN which in turn selects GENERIC_MSI_IRQ_DOMAIN. So all the dependencies on PCI_MSI_IRQ_DOMAIN are just an indirection to PCI_MSI. Match the reality and just admit that PCI_MSI requires GENERIC_MSI_IRQ_DOMAIN. Signed-off-by: Thomas Gleixner Reviewed-by: Jason Gunthorpe Acked-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20221111122014.467556921@linutronix.de