kernel/drivers/pci/controller/Kconfig, branch linux-6.5.y

Revert "PCI: mvebu: Mark driver as BROKEN"

2023-08-04T21:30:21Z

b3574f579ece ("PCI: mvebu: Mark driver as BROKEN") made it impossible to enable the pci-mvebu driver. The driver does have known problems, but as Russell and Uwe reported, it does work in some configurations, so removing it broke some working setups. Revert b3574f579ece so pci-mvebu is available. Reported-by: Russell King (Oracle) Link: https://lore.kernel.org/r/ZMzicVQEyHyZzBOc@shell.armlinux.org.uk Reported-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230804134622.pmbymxtzxj2yfhri@pengutronix.de Signed-off-by: Bjorn Helgaas

PCI: xilinx: Drop obsolete dependency on COMPILE_TEST

2023-04-20T21:18:05Z

Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. Link: https://lore.kernel.org/r/20230407190843.529caf19@endymion.delvare Signed-off-by: Jean Delvare Signed-off-by: Bjorn Helgaas Cc: Lorenzo Pieralisi Cc: Rob Herring Cc: "Krzysztof Wilczyński"

PCI: Sort controller Kconfig entries by vendor

2023-04-20T21:18:05Z

Sort Kconfig entries by vendor so they appear in alphabetical order in menuconfig. Link: https://lore.kernel.org/r/20230418174336.145585-6-helgaas@kernel.org Signed-off-by: Bjorn Helgaas

PCI: Use consistent controller Kconfig menu entry language

2023-04-20T21:18:04Z

Use "PCIe controller" consistently instead of "host bridge", "bus driver", etc. Annotate with "(host mode)" or "(endpoint mode)" as needed. Link: https://lore.kernel.org/r/20230418174336.145585-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas

PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt

2023-04-20T21:18:04Z

Add the "Xilinx" vendor name to the CONFIG_PCIE_XILINX_NWL Kconfig prompt so it matches other drivers. Rename from "PCIe Core" to "PCIe controller". Link: https://lore.kernel.org/r/20230418174336.145585-4-helgaas@kernel.org Signed-off-by: Bjorn Helgaas Acked-by: Michal Simek

PCI: hv: Add 'Microsoft' to Kconfig prompt

2023-04-20T21:18:04Z

Add the "Microsoft" vendor name to the CONFIG_PCI_HYPERV_INTERFACE Kconfig prompt so it matches other PCIe drivers and other Hyper-V prompts. Link: https://lore.kernel.org/r/20230418174336.145585-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas Acked-by: Wei Liu Cc: K. Y. Srinivasan Cc: Haiyang Zhang Cc: Dexuan Cui

Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2023-02-25T00:51:40Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Rework portdrv shutdown so it disables interrupts but doesn't disable bus mastering, which leads to hangs on Loongson LS7A - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases, again to avoid hardware issues on Loongson LS7A (and likely other devices based on DesignWare IP) - Ignore devices with a firmware (DT or ACPI) node that says the device is disabled Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. Tried this in v6.1 but had to revert for regressions, so try again - Fix root bus issue that dropped resources that happened to end at 0, e.g., [bus 00] PCI device hotplug: - Remove device locking when marking device as disconnected so this doesn't have to wait for concurrent driver bind/unbind to complete - Quirk more Qualcomm bridges that don't fully implement the PCIe Slot Status 'Command Completed' bit Power management: - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we don't miss hot-add notifications for USB4 docks, Thunderbolt, etc Reset: - Observe delay after reset, e.g., resuming from system sleep, regardless of whether a bridge can suspend to D3cold at runtime - Wait for secondary bus to become ready after a bridge reset Virtualization: - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work - Allow independent IOMMU groups for some Wangxun NICs that prevent peer-to-peer transactions but don't advertise an ACS Capability Error handling: - Configure End-to-End-CRC (ECRC) only if Linux owns the AER Capability - Remove redundant Device Control Error Reporting Enable in the AER service driver since this is already done for all devices during enumeration ASPM: - Add pci_enable_link_state() interface to allow drivers to enable ASPM link state Endpoint framework: - Move dra7xx and tegra194 linkup processing from hard IRQ to threaded IRQ handler - Add a separate lock for endpoint controller list of endpoint function drivers to prevent deadlock in callbacks - Pass events from endpoint controller to endpoint function drivers via callbacks instead of notifiers Synopsys DesignWare eDMA controller driver (acked by Vinod): - Fix CPU vs PCI address issues - Fix source vs destination address issues - Fix issues with interleaved transfer semantics - Fix channel count initialization issue (issue still exists in several other drivers) - Clean up and improve debugfs usage so it will work on platforms with several eDMA devices Baikal T-1 PCIe controller driver: - Set a 64-bit DMA mask Freescale i.MX6 PCIe controller driver: - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support Intel VMD host bridge driver: - Add quirk to configure PCIe ASPM and LTR. This is normally done by BIOS, and will be for future products Marvell MVEBU PCIe controller driver: - Mark this driver as broken in Kconfig since bugs prevent its daily usage MediaTek MT7621 PCIe controller driver: - Delay PHY port initialization to improve boot reliability for ZBT WE1326, ZBT WF3526-P, and some Netgear models Qualcomm PCIe controller driver: - Add MSM8998 DT compatible string - Unify MSM8996 and MSM8998 clock orderings - Add SM8350 DT binding and driver support - Add IPQ8074 Gen3 DT binding and driver support - Correct qcom,perst-regs in DT binding - Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and clocks are disabled on late host-init errors Socionext UniPhier Pro5 controller driver: - Clean up uniphier-ep reg, clocks, resets, and their names in DT binding Synopsys DesignWare PCIe controller driver: - Restrict coherent DMA mask to 32 bits for MSI, but allow controller drivers to set 64-bit streaming DMA mask - Add eDMA engine support in both Root Port and Endpoint controllers Miscellaneous: - Remove MODULE_LICENSE from boolean drivers so they don't look like modules so modprobe can complain about them" * tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits) PCI: dwc: Add Root Port and Endpoint controller eDMA engine support PCI: bt1: Set 64-bit DMA mask PCI: dwc: Restrict only coherent DMA mask for MSI address allocation dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it dmaengine: dw-edma: Add mem-mapped LL-entries support PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules PCI: hv: Drop duplicate PCI_MSI dependency PCI/P2PDMA: Annotate RCU dereference PCI/sysfs: Constify struct kobj_type pci_slot_ktype PCI: hotplug: Allow marking devices as disconnected during bind/unbind PCI: pciehp: Add Qualcomm quirk for Command Completed erratum PCI: qcom: Add IPQ8074 Gen3 port support dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port dt-bindings: PCI: qcom: Sort compatibles alphabetically PCI: qcom: Fix host-init error handling PCI: qcom: Add SM8350 support dt-bindings: PCI: qcom: Add SM8350 dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order ...

Merge branch 'pci/misc'

2023-02-22T19:47:32Z

- Drop bogus kernel-doc marker in pci_endpoint_test.c (Randy Dunlap) - Fix epf_ntb_mw_bar_clear() kernel-doc (Yang Yingliang) - Constify struct kobj_type pci_slot_ktype (Thomas Weißschuh) * pci/misc: PCI: hv: Drop duplicate PCI_MSI dependency PCI/sysfs: Constify struct kobj_type pci_slot_ktype PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc misc: pci_endpoint_test: Drop initial kernel-doc marker

PCI: hv: Drop duplicate PCI_MSI dependency

2023-02-16T23:20:42Z

Commit a474d3fbe287 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed PCI_MSI_IRQ_DOMAIN and made all previous references to it refer to PCI_MSI instead. PCI_HYPERV_INTERFACE already depended on PCI_MSI && PCI_MSI_IRQ_DOMAIN, so we ended up with a redundant dependency on PCI_MSI && PCI_MSI. Drop the duplicate. No functional change. Just a stylistic clean-up. Link: https://lore.kernel.org/r/20221215101310.9135-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn Signed-off-by: Bjorn Helgaas

PCI: mvebu: Mark driver as BROKEN

2023-02-09T09:01:30Z

People are reporting that pci-mvebu.c driver does not work with recent mainline kernel. There are more bugs which prevents its for daily usage. So lets mark it as broken for now, until somebody would be able to fix it in mainline kernel. Link: https://lore.kernel.org/r/20230114164125.1298-1-pali@kernel.org Signed-off-by: Pali Rohár Signed-off-by: Lorenzo Pieralisi