kernel/drivers/opp/opp.h, branch linux-5.1.y

Merge tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2019-03-06T20:59:46Z

Pull power management updates from Rafael Wysocki: "These are PM-runtime framework changes to use ktime instead of jiffies for accounting, new PM core flag to mark devices that don't need any form of power management, cpuidle updates including driver API documentation and a new governor, cpufreq updates including a new driver for Armada 8K, thermal cleanups and more, some energy-aware scheduling (EAS) enabling changes, new chips support in the intel_idle and RAPL drivers and assorted cleanups in some other places. Specifics: - Update the PM-runtime framework to use ktime instead of jiffies for accounting (Thara Gopinath, Vincent Guittot) - Optimize the autosuspend code in the PM-runtime framework somewhat (Ladislav Michl) - Add a PM core flag to mark devices that don't need any form of power management (Sudeep Holla) - Introduce driver API documentation for cpuidle and add a new cpuidle governor for tickless systems (Rafael Wysocki) - Add Jacobsville support to the intel_idle driver (Zhang Rui) - Clean up a cpuidle core header file and the cpuidle-dt and ACPI processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam) - Add new cpufreq driver for Armada 8K (Gregory Clement) - Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit Kucheria) - Add support for light-weight tear-down and bring-up of CPUs to the cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar) - Fix cpu_cooling Kconfig dependencies, add support for CPU cooling auto-registration to the cpufreq core and use it in multiple cpufreq drivers (Amit Kucheria) - Fix some minor issues and do some cleanups in the davinci, e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers (Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel, Taniya Das, Viresh Kumar) - Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng Wang) - Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu, Rafael Wysocki) - Clean up multiple cpufreq drivers (Yangtao Li) - Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas Bulwahn) - Add support for exposing the Energy Model via debugfs and make multiple cpufreq drivers register an Energy Model to support energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias Kaehlcke) - Add Ice Lake mobile and Jacobsville support to the Intel RAPL power-capping driver (Gayatri Kammela, Zhang Rui) - Add a power estimation helper to the operating performance points (OPP) framework and clean up a core function in it (Quentin Perret, Viresh Kumar) - Make minor improvements in the generic power domains (genpd), OPP and system suspend frameworks and in the PM core (Aditya Pakki, Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)" * tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits) cpufreq: kryo: Release OPP tables on module removal cpufreq: ap806: add missing of_node_put after of_device_is_available cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies cpufreq: Pass updated policy to driver ->setpolicy() callback cpufreq: Fix two debug messages in cpufreq_set_policy() cpufreq: Reorder and simplify cpufreq_update_policy() cpufreq: Add kerneldoc comments for two core functions PM / core: Add support to skip power management in device/driver model cpufreq: intel_pstate: Rework iowait boosting to be less aggressive cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate() cpufreq: intel_pstate: Avoid redundant initialization of local vars powercap/intel_rapl: add Ice Lake mobile ACPI / processor: Set P_LVL{2,3} idle state descriptions cpufreq / cppc: Work around for Hisilicon CPPC cpufreq ACPI / CPPC: Add a helper to get desired performance cpufreq: davinci: move configuration to include/linux/platform_data cpufreq: speedstep: convert BUG() to BUG_ON() cpufreq: powernv: fix missing check of return value in init_powernv_pstates() cpufreq: longhaul: remove unneeded semicolon cpufreq: pcc-cpufreq: remove unneeded semicolon ..

opp: no need to check return value of debugfs_create functions

2019-02-07T04:28:32Z

When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Viresh Kumar Cc: Nishanth Menon Cc: Stephen Boyd Cc: linux-pm@vger.kernel.org Reviewed-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman Signed-off-by: Viresh Kumar

OPP: Add support for parsing the 'opp-level' property

2019-01-22T21:06:11Z

Now that the OPP bindings are updated to include an optional 'opp-level' property, add support to parse it from device tree and store it as part of dev_pm_opp structure. Also add and export an helper 'dev_pm_opp_get_level()' that can be used to get the level value read from device tree when present. Reviewed-by: Stephen Boyd Acked-by: Viresh Kumar Signed-off-by: Rajendra Nayak Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross

Merge branch 'opp/genpd/propagation' into opp/linux-next

2018-12-14T10:58:52Z

OPP: Fix missing debugfs supply directory for OPPs

2018-12-11T11:21:56Z

There is one case where we may end up with no "supply" directory for the OPPs in debugfs. That happens when the OPP core isn't managing the regulators for the device and the device's OPP do have microvolt property. It happens because the opp_table->regulator_count remains set to 0 and the debugfs routines don't add any supply directory in such a case. This commit fixes that by setting opp_table->regulator_count to 1 in that particular case. But to make everything work nicely and not break other parts of the core, regulator_count is defined as "int" now instead of "unsigned int" and it can have different special values now. It is set to -1 initially to mark it "uninitialized" and later only we set it to 0 or positive values after checking how many supplies are there. This also helps in finding the bugs where only few of the OPPs have the "opp-microvolt" property set and not all. Fixes: 1fae788ed640 ("PM / OPP: Don't create debugfs "supply-0" directory unnecessarily") Reported-by: Quentin Perret Signed-off-by: Viresh Kumar

OPP: Add dev_pm_opp_{set|put}_genpd_virt_dev() helper

2018-11-05T02:10:43Z

Multiple generic power domains for a consumer device are supported with the help of virtual devices, which are created for each consumer device - genpd pair. These are the device structures which are attached to the power domain and are required by the OPP core to set the performance state of the genpd. The helpers added by this commit are required to be called once for each of these virtual devices. These are required only if multiple domains are available for a device, otherwise the actual device structure will be used instead by the OPP core. The new helpers also support the complex cases where the consumer device wouldn't always require all the domains. For example, a camera may require only one power domain during normal operations but two during high resolution operations. The consumer driver can call dev_pm_opp_put_genpd_virt_dev(high_resolution_genpd_virt_dev) if it is currently operating in the normal mode and doesn't have any performance requirements from the genpd which manages high resolution power requirements. The consumer driver can later call dev_pm_opp_set_genpd_virt_dev(high_resolution_genpd_virt_dev) once it switches back to the high resolution mode. The new helpers differ from other OPP set/put helpers as the new ones can be called with OPPs initialized for the table as we may need to call them on the fly because of the complex case explained above. For this reason it is possible that the genpd virt_dev structure may be used in parallel while the new helpers are running and a new mutex is added to protect against that. We didn't use the existing opp_table->lock mutex as that is widely used in the OPP core and we will need this lock in the dev_pm_opp_set_rate() helper while changing OPP and we need to make sure there is not much contention while doing that as that's the hotpath. Reviewed-by: Ulf Hansson Signed-off-by: Viresh Kumar

OPP: Populate OPPs from "required-opps" property

2018-11-05T02:10:42Z

An earlier commit populated the OPP tables from the "required-opps" property, this commit populates the individual OPPs. This is repeated for each OPP in the OPP table and these populated OPPs will be used by later commits. Reviewed-by: Ulf Hansson Signed-off-by: Viresh Kumar

OPP: Populate required opp tables from "required-opps" property

2018-11-05T02:10:42Z

The current implementation works only for the case where a single phandle is present in the "required-opps" property, while DT allows multiple phandles to be present there. This patch adds new infrastructure to parse all the phandles present in "required-opps" property and save pointers of the required OPP's OPP tables. These will be used by later commits. Reviewed-by: Ulf Hansson Signed-off-by: Viresh Kumar

OPP: Identify and mark genpd OPP tables

2018-11-05T02:10:42Z

We need to handle genpd OPP tables differently, this is already the case at one location and will be extended going forward. Add another field to the OPP table to check if the table belongs to a genpd or not. Reviewed-by: Ulf Hansson Signed-off-by: Viresh Kumar

OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes

2018-10-01T09:30:31Z

When two or more devices are sharing their clock and voltage rails, they share the same OPP table. But there are some corner cases where the OPP core incorrectly creates separate OPP tables for them. For example, CPU 0 and 1 share clock/voltage rails. The platform specific code calls dev_pm_opp_set_regulators() for CPU0 and the OPP core creates an OPP table for it (the individual OPPs aren't initialized as of now). The same is repeated for CPU1 then. Because _opp_get_opp_table() doesn't compare DT node pointers currently, it fails to find the link between CPU0 and CPU1 and so creates a new OPP table. Fix this by calling _managed_opp() from _opp_get_opp_table(). _managed_opp() gain an additional argument (index) to get the right node pointer. This resulted in simplifying code in _of_add_opp_table_v2() as well. Tested-by: Niklas Cassel Signed-off-by: Viresh Kumar