kernel/drivers/opp/core.c, branch linux-6.9.y

OPP: Fix required_opp_tables for multiple genpds using same table

2024-06-27T11:52:19Z

[ Upstream commit 2a56c462fe5a2ee61d38e2d7b772bee56115a00c ] The required_opp_tables parsing is not perfect, as the OPP core does the parsing solely based on the DT node pointers. The core sets the required_opp_tables entry to the first OPP table in the "opp_tables" list, that matches with the node pointer. If the target DT OPP table is used by multiple devices and they all create separate instances of 'struct opp_table' from it, then it is possible that the required_opp_tables entry may be set to the incorrect sibling device. Unfortunately, there is no clear way to initialize the right values during the initial parsing and we need to do this at a later point of time. Cross check the OPP table again while the genpds are attached and fix them if required. Also add a new API for the genpd core to fetch the device pointer for the genpd. Cc: Thorsten Leemhuis Reported-by: Vladimir Lypak Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218682 Co-developed-by: Vladimir Lypak Signed-off-by: Viresh Kumar Reviewed-by: Ulf Hansson Signed-off-by: Sasha Levin

OPP: Extend dev_pm_opp_data with turbo support

2024-03-11T05:09:24Z

Let's extend the dev_pm_opp_data with a turbo variable, to allow users to specify if it's a boost frequency for a dynamically added OPP. Signed-off-by: Sibi Sankar Signed-off-by: Viresh Kumar

OPP: Rename 'rate_clk_single'

2024-01-05T10:25:41Z

The field's name isn't clear enough. Rename it. Signed-off-by: Viresh Kumar

OPP: Pass rounded rate to _set_opp()

2024-01-05T10:23:28Z

The OPP core finds the eventual frequency to set with the help of clk_round_rate() and the same was earlier getting passed to _set_opp() and that's what would get configured. The commit 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of frequency") mistakenly changed that. Fix it. Fixes: 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of frequency") Cc: v5.18+ # v6.0+ Signed-off-by: Viresh Kumar

OPP: Relocate dev_pm_opp_sync_regulators()

2024-01-05T10:22:33Z

Move this to a more relevant place in the file. No functional changes. Signed-off-by: Viresh Kumar

OPP: Fix _set_required_opps when opp is NULL

2023-12-28T05:25:27Z

_set_required_opps can be called with opp NULL in _disable_opp_table(). commit e37440e7e2c2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs") requires the opp pointer to be non-NULL to function. [ 81.253439] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 81.438407] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 81.445296] Workqueue: pm pm_runtime_work [ 81.449446] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 81.456609] pc : _set_required_opps+0x178/0x28c [ 81.461288] lr : _set_required_opps+0x178/0x28c [ 81.465962] sp : ffff80008078bb00 [ 81.469375] x29: ffff80008078bb00 x28: ffffd1cd71bfe308 x27: 0000000000000000 [ 81.476730] x26: ffffd1cd70ebc578 x25: ffffd1cd70a08710 x24: 00000000ffffffff [ 81.484083] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff56ff892b3c48 [ 81.491435] x20: ffff56f1071c10 x19: 0000000000000000 x18: ffffffffffffffff [ 81.498788] x17: 2030207865646e69 x16: 2030303131207370 x15: 706f5f6465726975 [ 81.506141] x14: 7165725f7465735f x13: ffff5700f5c00000 x12: 00000000000008ac [ 81.513495] x11: 00000000000002e4 x10: ffff5700f6700000 x9 : ffff5700f5c00000 [ 81.520848] x8 : 00000000fffdffff x7 : ffff5700f6700000 x6 : 80000000fffe0000 [ 81.528200] x5 : ffff5700fef40d08 x4 : 0000000000000000 x3 : 0000000000000000 [ 81.535551] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff56ff81298f80 [ 81.542904] Call trace: [ 81.545437] _set_required_opps+0x178/0x28c [ 81.549754] _set_opp+0x3fc/0x5c0 [ 81.553181] dev_pm_opp_set_rate+0x90/0x26c [ 81.557498] core_power_v4+0x44/0x15c [venus_core] [ 81.562509] venus_runtime_suspend+0x40/0xd0 [venus_core] [ 81.568135] pm_generic_runtime_suspend+0x2c/0x44 [ 81.572983] __rpm_callback+0x48/0x1d8 [ 81.576852] rpm_callback+0x6c/0x78 [ 81.580453] rpm_suspend+0x10c/0x570 [ 81.584143] pm_runtime_work+0xc4/0xc8 [ 81.588011] process_one_work+0x138/0x244 [ 81.592153] worker_thread+0x320/0x438 [ 81.596021] kthread+0x110/0x114 [ 81.599355] ret_from_fork+0x10/0x20 [ 81.603052] Code: f10000ff fa5410e0 54fffbe1 97f05ae8 (f94026c5) [ 81.609317] ---[ end trace 0000000000000000 ]--- Fix it. Fixes: e37440e7e2c2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs") Signed-off-by: Bryan O'Donoghue [ Viresh: Implemented the fix differently ] Signed-off-by: Viresh Kumar Reviewed-by: Bryan O'Donoghue Tested-by: Bryan O'Donoghue

OPP: The level field is always of unsigned int type

2023-12-27T07:57:30Z

By mistake, dev_pm_opp_find_level_floor() used the level parameter as unsigned long instead of unsigned int. Fix it. Signed-off-by: Viresh Kumar

OPP: Check for invalid OPP in dev_pm_opp_find_level_ceil()

2023-11-28T10:33:37Z

_find_key_ceil() may return an error and that must be checked before passing the same to dev_pm_opp_put(). Fixes: 41907aa4ae37 ("OPP: Level zero is valid") Reported-by: Dan Carpenter Signed-off-by: Viresh Kumar

OPP: Don't set OPP recursively for a parent genpd

2023-11-28T10:33:25Z

Like other frameworks (clk, regulator, etc.) genpd core too takes care of propagation to performance state to parent genpds. The OPP core shouldn't attempt the same, or it may result in undefined behavior. Add checks at various places to take care of the same. Reviewed-by: Ulf Hansson Tested-by: Stephan Gerhold Signed-off-by: Viresh Kumar

OPP: Call dev_pm_opp_set_opp() for required OPPs

2023-11-28T10:33:19Z

Configuring the required OPP was never properly implemented, we just took an exception for genpds and configured them directly, while leaving out all other required OPP types. Now that a standard call to dev_pm_opp_set_opp() takes care of configuring the opp->level too, the special handling for genpds can be avoided by simply calling dev_pm_opp_set_opp() for the required OPPs, which shall eventually configure the corresponding level for genpds. This also makes it possible for us to configure other type of required OPPs (no concrete users yet though), via the same path. This is how other frameworks take care of parent nodes, like clock, regulators, etc, where we recursively call the same helper. In order to call dev_pm_opp_set_opp() for the virtual genpd devices, they must share the OPP table of the genpd. Call _add_opp_dev() for them to get that done. This commit also extends the struct dev_pm_opp_config to pass required devices, for non-genpd cases, which can be used to call dev_pm_opp_set_opp() for the non-genpd required devices. Reviewed-by: Ulf Hansson Tested-by: Stephan Gerhold Signed-off-by: Viresh Kumar