kernel/drivers/of/base.c, branch linux-4.16.y

Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-02-01T18:57:45Z

Pull DeviceTree updates from Rob Herring: - Convert to use memblock_virt_alloc in DT code which supports bootmem arches. With this we can remove the arch specific early_init_dt_alloc_memory_arch() functions. - Enable running the DT unittests on UML - Use SPDX license tags on DT files - Fix early FDT kconfig ifdef logic - Clean-up unittest Makefile - Fix function comment for of_irq_parse_raw - Add missing documentation for linux,initrd-{start,end} properties - Clean-up of binding examples using uppercase hex - Add trivial devices W83773G and Infineon TLV493D-A1B6 - Add missing STM32 SoC bindings - Various small binding doc fixes * tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits) xtensa: remove arch specific early DT functions x86: remove arch specific early_init_dt_alloc_memory_arch nios2: remove arch specific early_init_dt_alloc_memory_arch mips: remove arch specific early_init_dt_alloc_memory_arch metag: remove arch specific early DT functions cris: remove arch specific early DT functions libfdt: remove unnecessary include directive from of: unittest: refactor Makefile of/fdt: use memblock_virt_alloc for early alloc of: Use SPDX license tag for DT files of/fdt: Fix #ifdef dependency of early flattree declarations dt-bindings: h8300 clocksource: correct spelling of pulse dt-bindings: imx6q-pcie: Add required property for i.MX6SX mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding dt-bindings: Use lower case hex in unit-addresses dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000 dt-bindings: Add Infineon TLV493D-A1B6 dt-bindings: mailbox: ti,message-manager: Fix interrupt name error dt-bindings: chosen: Document linux,initrd-{start,end} dt-bindings: arm: document supported STM32 SoC family ...

of: Use SPDX license tag for DT files

2018-01-08T14:22:45Z

Convert remaining DT files to use SPDX-License-Identifier tags. Cc: Benjamin Herrenschmidt Cc: Guennadi Liakhovetski Cc: Paul Mackerras Cc: Pantelis Antoniou Reviewed-by: Frank Rowand Reviewed-by: Philippe Ombredanne Signed-off-by: Rob Herring

of: Add helper for mapping device node to logical CPU number

2018-01-02T16:43:12Z

Add a helper to map a device node to a logical CPU number to avoid duplication. Currently this is open coded in different places (e.g gic-v3, coresight). The helper tries to map device node to a "possible" logical CPU id, which may not be online yet. It is the responsibility of the user to make sure that the CPU is online. The helper uses of_cpu_device_node_get() to retrieve the device node for a given CPU (which uses per_cpu data if available else falls back to slower of_get_cpu_node()). Cc: devicetree@vger.kernel.org Cc: Frank Rowand Cc: Mark Rutland Cc: Sudeep Holla Reviewed-by: Marc Zyngier Reviewed-by: Rob Herring Signed-off-by: Suzuki K Poulose Signed-off-by: Will Deacon

Merge tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2017-11-21T07:38:41Z

Pull DeviceTree fixes from Rob Herring: - Remove mc13892 as a trivial device - Improve of_find_node_by_name() documentation - Fix unit test dtc warnings - Clean-ups of USB binding documentation - Fix potential NULL deref in of_pci_map_rid * tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: trivial-devices: Remove fsl,mc13892 of: Document exactly what of_find_node_by_name() puts of: unittest: disable interrupts_property warning of: unittest: let dtc generate __local_fixups__ dt-bindings: usb: document hub and host-controller properties dt-bindings: usb: clean up compatible property dt-bindings: usb: fix reg-property port-number range dt-bindings: usb: fix example hub node name of/pci: Fix theoretical NULL dereference

of: Document exactly what of_find_node_by_name() puts

2017-11-20T18:15:44Z

It isn't clear if this function of_node_put()s the 'from' argument, or the node it searches. Clearly indicate which variable is touched. Fold in some more fixes from Randy too because we're in the area. Cc: Randy Dunlap Signed-off-by: Stephen Boyd Acked-by: Randy Dunlap Signed-off-by: Rob Herring

Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2017-11-15T02:25:40Z

Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...

of: overlay: remove a dependency on device node full_name

2017-10-18T01:47:37Z

The "%pOF" printf format was recently added to print the full name of a device tree node, with the intent of changing the node full_name field to contain only the node name instead of the full path of the node. dup_and_fixup_symbol_prop() duplicates a property from the "/__symbols__" node of an overlay device tree. The value of each duplicated property must be fixed up to include the full path of a node in the live device tree. The current code uses the node's full_name for that purpose. Update the code to use the "%pOF" printf format to determine the node's full path. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring

of: make kobject and bin_attribute support configurable

2017-10-16T18:37:38Z

Having device_nodes be kobjects is only needed if sysfs or OF_DYNAMIC is enabled. Otherwise, having a kobject in struct device_node is unnecessary bloat in minimal kernel configurations. Likewise, bin_attribute is only needed in struct property when sysfs is enabled, so we can make it configurable too. Tested-by: Nicolas Pitre Reviewed-by: Frank Rowand Acked-by: Grant Likely Signed-off-by: Rob Herring

of: fix missing kobject init for !SYSFS && OF_DYNAMIC config

2017-10-16T18:37:36Z

The ref counting is broken for OF_DYNAMIC when sysfs is disabled because the kobject initialization is skipped. Only the properties add/remove/update should be skipped for !SYSFS config. Tested-by: Nicolas Pitre Reviewed-by: Frank Rowand Acked-by: Grant Likely Signed-off-by: Rob Herring

of: do not leak console options

2017-10-12T17:22:04Z

Do not strdup() console options. It seems that the only reason for it to be strdup()-ed was a compilation warning: printk, UART and console drivers, for some reason, expect char pointer instead of const char pointer. So we can just pass `of_stdout_options', but need to cast it to char pointer. A better fix would be to change printk, console drivers and UART to accept const char `options'; but that will take time - there are lots of drivers to update. The patch also fixes a possible memory leak: add_preferred_console() can fail, but we don't kfree() options. Signed-off-by: Sergey Senozhatsky Reviewed-by: Petr Mladek Signed-off-by: Rob Herring