kernel/drivers/of/Kconfig, branch linux-4.16.y

Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-02-06T17:59:40Z

Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...

PCI: Move OF-related PCI functions into PCI core

2018-01-17T23:36:39Z

Following what has been done for other subsystems, move the remaining PCI related code out of drivers/of/ and into drivers/pci/of.c With this, we can kill a few kconfig symbols. Signed-off-by: Rob Herring [bhelgaas: minor whitespace, comment cleanups] Signed-off-by: Bjorn Helgaas Cc: Frank Rowand

of: Use SPDX license tag for DT files

2018-01-08T14:22:45Z

Convert remaining DT files to use SPDX-License-Identifier tags. Cc: Benjamin Herrenschmidt Cc: Guennadi Liakhovetski Cc: Paul Mackerras Cc: Pantelis Antoniou Reviewed-by: Frank Rowand Reviewed-by: Philippe Ombredanne Signed-off-by: Rob Herring

of: enable unittests on UML

2017-12-12T17:35:53Z

The unittests can run on UML, but OF_IRQ and OF_ADDRESS need to be enabled. Rework the kconfig dependencies to enable the unittests. The unittests cannot build on Sparc, so we need to add an explicit dependency for !SPARC. There's one failure in overlay tests because the base DT is not unflattened early. Cc: Thomas Meyer Signed-off-by: Rob Herring

of: make kobject and bin_attribute support configurable

2017-10-16T18:37:38Z

Having device_nodes be kobjects is only needed if sysfs or OF_DYNAMIC is enabled. Otherwise, having a kobject in struct device_node is unnecessary bloat in minimal kernel configurations. Likewise, bin_attribute is only needed in struct property when sysfs is enabled, so we can make it configurable too. Tested-by: Nicolas Pitre Reviewed-by: Frank Rowand Acked-by: Grant Likely Signed-off-by: Rob Herring

mtd: Kill the OF_MTD Kconfig option

2016-09-23T07:35:16Z

Commit d48f62b9a0a0 ("mtd: nand: move of_get_nand_xxx() helpers into nand_base.c") removed the drivers/of/of_mtd.c file but did not remove the associated OF_MTD Kconfig option. Signed-off-by: Boris Brezillon

of_mdio: select fixed phy support unconditionally

2016-06-28T09:47:52Z

Calling the fixed-phy functions when CONFIG_FIXED_PHY=m as a previous change tried cannot work if the caller is in built-in code: drivers/of/built-in.o: In function `of_phy_register_fixed_link': of_reserved_mem.c:(.text+0x85e0): undefined reference to `fixed_phy_register' Making of_mdio depend on 'FIXED_PHY || !FIXED_PHY' would solve this dependency by enforcing that OF_MDIO itself becomes a loadable module when FIXED_PHY=y, but that creates a different dependency as it breaks any built-in ethernet driver that uses of_mdio. Making FIXED_PHY a bool option also cannot work, since it depends on PHYLIB, which again is tristate. This version now uses 'select FIXED_PHY' to ensure that the fixed-phy portion of of_mdio is not optional. The main downside of this is a small increase in code size for cases that do not need fixed phy support, but it should avoid all of the link-time problems. Signed-off-by: Arnd Bergmann Fixes: d1bd330a229f ("of_mdio: Enable fixed PHY support if driver is a module") Acked-by: Randy Dunlap Signed-off-by: David S. Miller

of, numa: Add NUMA of binding implementation.

2016-04-15T17:06:08Z

Add device tree parsing for NUMA topology using device "numa-node-id" property in distance-map and cpu nodes. This is a complete rewrite of a previous patch by: Ganapatrao Kulkarni Signed-off-by: David Daney Acked-by: Rob Herring Signed-off-by: Will Deacon

of: add config option to enable building of all dtbs

2015-10-27T21:12:13Z

Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs are not really dependent on a platform being enabled or any other kernel config, so for testing coverage it is convenient to build all of the dtbs. In order to only build dtbs, this option can be used by creating an allno.config file containing: CONFIG_COMPILE_TEST=y CONFIG_OF=y CONFIG_OF_ALL_DTBS=y And then running: make KCONFIG_ALLCONFIG=1 allnoconfig make dtbs While building the dtbs themselves don't need a cross compiler, the scripts dependency does need one. This can be hacked around by commenting out "subdir-y += mod" in scripts/Makefile. Signed-off-by: Rob Herring Cc: Frank Rowand Cc: Grant Likely

of: add HAS_IOMEM depends to OF_ADDRESS

2015-07-27T13:21:04Z

On UML builds, of_address.c fails to compile: ../drivers/of/address.c:873:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] This is due to CONFIG_OF now being user selectable. Add a dependency on HAS_IOMEM to OF_ADDRESS in order to fix this. Signed-off-by: Rob Herring Cc: Grant Likely