kernel/drivers/nvme/host/fc.c, branch linux-5.1.y

nvme-fc: correct csn initialization and increments on error

2019-04-11T15:28:30Z

This patch fixes a long-standing bug that initialized the FC-NVME cmnd iu CSN value to 1. Early FC-NVME specs had the connection starting with CSN=1. By the time the spec reached approval, the language had changed to state a connection should start with CSN=0. This patch corrects the initialization value for FC-NVME connections. Additionally, in reviewing the transport, the CSN value is assigned to the new IU early in the start routine. It's possible that a later dma map request may fail, causing the command to never be sent to the controller. Change the location of the assignment so that it is immediately prior to calling the lldd. Add a comment block to explain the impacts if the lldd were to additionally fail sending the command. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Ewan D. Milne Signed-off-by: Christoph Hellwig

nvme-fc: reject reconnect if io queue count is reduced to zero

2019-03-13T18:05:40Z

If: - A successful connect has occurred with an io queue count greater than zero and namespaces detected and running. - An error or something occurs which causes a termination of the prior association and then starts a reconnect, - The reconnect then creates a new controller, but for whatever reason, nvme_set_queue_count() results in io queue count set to zero. This will skip io queue and tag set changes. - But... the controller will transition to live, calling nvme_start_ctrl, which calls nvme_start_queues(), which then releases I/Os into the transport which then sends them to the driver. As there are no queues, things eventually hit the driver looking for a handle, which was cleared when the original controller was reset, and it can't proceed. Worst case, things progress, but everything fails. In the failing scenario, the nvme_set_features(NVME_FEAT_NUM_QUEUES) command actually failed with a NVME_SC_INTERNAL error. For some reason, although nvme_set_queue_count() saw the error and set io queue count to zero, it doesn't return a failure status to the transport, which allows the transport to continue using the controller. Fix the problem by simply rejecting the new association if at least 1 I/O queue can't be created. The association reject will fail the reconnect attempt and fall into the reconnect retry policy. Signed-off-by: James Smart Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

nvme-fc: fix numa_node when dev is null

2019-03-13T18:05:40Z

A recent change added a numa_node field to the nvme controller and has the transport assign the node using dev_to_node(). However, fcloop registers with a NULL device struct, so the dev_to_node() call oops. Revise the assignment to assign no node when device struct is null. Fixes: 103e515efa89b ("nvme: add a numa_node field to struct nvme_ctrl") Reported-by: Mike Snitzer Signed-off-by: James Smart Reviewed-by: Sagi Grimberg Reviewed-by: Hannes Reinecke Reviewed-by: Mike Snitzer [hch: small coding style fixup] Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

nvme-fc: use nr_phys_segments to determine existence of sgl

2019-03-13T18:05:39Z

For some nvme command, when issued by the nvme core layer, there is an internal buffer which can cause blk_rq_payload_bytes() to return a non-zero value yet there is no actual/real command payload and sg list. An example is the WRITE ZEROES command. To address this, when making choices on whether to dma map an sgl, use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes(). When there is a sgl, blk_rq_payload_bytes() will return the amount of data to be transferred by the sgl. Signed-off-by: Chaitanya Kulkarni Signed-off-by: James Smart Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

nvme-fc: convert to SPDX identifiers

2019-02-20T14:22:17Z

Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg

nvme-fabrics: allow nvmf_connect_io_queue to poll

2018-12-18T16:50:48Z

Preparation for polling support for fabrics. Polling support means that our completion queues are not generating any interrupts which means we need to poll for the nvmf io queue connect as well. Reviewed by Steve Wise Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig

nvme: add a numa_node field to struct nvme_ctrl

2018-12-08T05:26:55Z

Instead of directly poking into the struct device add a new numa_node field to struct nvme_ctrl. This allows fabrics drivers where ctrl->dev is a virtual device to support NUMA affinity as well. Also expose the field as a sysfs attribute, and populate it for the RDMA and FC transports. Signed-off-by: Hannes Reinecke Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

Merge tag 'v4.20-rc5' into for-4.21/block

2018-12-04T16:38:05Z

Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and also getting the merge fix that went into mainline that users are hitting testing for-4.21/block and/or for-next. * tag 'v4.20-rc5': (664 commits) Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace psi: make disabling/enabling easier for vendor kernels proc: fixup map_files test on arm debugobjects: avoid recursive calls with kmemleak userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set ...

nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request()

2018-11-27T17:12:08Z

__nvme_fc_init_request() invokes memset() on the nvme_fcp_op_w_sgl structure, which NULLed-out the nvme_req(req)->ctrl field previously set by nvme_fc_init_request(). This apparently was not referenced until commit faf4a44fff ("nvme: support traffic based keep-alive") which now results in a crash in nvme_complete_rq(): [ 8386.897130] RIP: 0010:panic+0x220/0x26c [ 8386.901406] Code: 83 3d 6f ee 72 01 00 74 05 e8 e8 54 02 00 48 c7 c6 40 fd 5b b4 48 c7 c7 d8 8d c6 b3 31e [ 8386.922359] RSP: 0018:ffff99650019fc40 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 8386.930804] RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000006 [ 8386.938764] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8e325f8168b0 [ 8386.946725] RBP: ffff99650019fcb0 R08: 0000000000000000 R09: 00000000000004f8 [ 8386.954687] R10: 0000000000000000 R11: ffff99650019f9b8 R12: ffffffffb3c55f3c [ 8386.962648] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 [ 8386.970613] oops_end+0xd1/0xe0 [ 8386.974116] no_context+0x1b2/0x3c0 [ 8386.978006] do_page_fault+0x32/0x140 [ 8386.982090] page_fault+0x1e/0x30 [ 8386.985786] RIP: 0010:nvme_complete_rq+0x65/0x1d0 [nvme_core] [ 8386.992195] Code: 41 bc 03 00 00 00 74 16 0f 86 c3 00 00 00 66 3d 83 00 41 bc 06 00 00 00 0f 85 e7 00 000 [ 8387.013147] RSP: 0018:ffff99650019fe18 EFLAGS: 00010246 [ 8387.018973] RAX: 0000000000000000 RBX: ffff8e322ae51280 RCX: 0000000000000001 [ 8387.026935] RDX: 0000000000000400 RSI: 0000000000000001 RDI: ffff8e322ae51280 [ 8387.034897] RBP: ffff8e322ae51280 R08: 0000000000000000 R09: ffffffffb2f0b890 [ 8387.042859] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 8387.050821] R13: 0000000000000100 R14: 0000000000000004 R15: ffff8e2b0446d990 [ 8387.058782] ? swiotlb_unmap_page+0x40/0x40 [ 8387.063448] nvme_fc_complete_rq+0x2d/0x70 [nvme_fc] [ 8387.068986] blk_done_softirq+0xa1/0xd0 [ 8387.073264] __do_softirq+0xd6/0x2a9 [ 8387.077251] run_ksoftirqd+0x26/0x40 [ 8387.081238] smpboot_thread_fn+0x10e/0x160 [ 8387.085807] kthread+0xf8/0x130 [ 8387.089309] ? sort_range+0x20/0x20 [ 8387.093198] ? kthread_stop+0x110/0x110 [ 8387.097475] ret_from_fork+0x35/0x40 [ 8387.101462] ---[ end trace 7106b0adf5e422f8 ]--- Fixes: faf4a44fff ("nvme: support traffic based keep-alive") Signed-off-by: Ewan D. Milne Reviewed-by: Hannes Reinecke Signed-off-by: Christoph Hellwig

nvme-fc: remove ->poll implementation

2018-11-19T19:06:32Z

It's specifically looking for a given request, which we will not be supporting going forward. Also kill the qla2xxx poll implementation as that's the only user of the nvme-fc poll, and the now unused ->poll_queue() hook. Reviewed-by: Christoph Hellwig Reviewed-by: James Smart Signed-off-by: Jens Axboe