kernel/drivers/ntb/hw/idt, branch linux-6.9.y

ntb: idt: drop redundant pci_enable_pcie_error_reporting()

2023-07-08T15:02:36Z

pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas Acked-by: Serge Semin Signed-off-by: Jon Mason

ntb: idt: Fix error handling in idt_pci_driver_init()

2023-07-08T14:51:55Z

A problem about ntb_hw_idt create debugfs failed is triggered with the following log given: [ 1236.637636] IDT PCI-E Non-Transparent Bridge Driver 2.0 [ 1236.639292] debugfs: Directory 'ntb_hw_idt' with parent '/' already present! The reason is that idt_pci_driver_init() returns pci_register_driver() directly without checking its return value, if pci_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ntb_hw_idt can never be created later. idt_pci_driver_init() debugfs_create_dir() # create debugfs directory pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when pci_register_driver() returns error. Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support") Signed-off-by: Yuan Can Signed-off-by: Jon Mason

ntb: idt: fix clang -Wformat warnings

2022-08-09T15:54:40Z

When building with Clang we encounter these warnings: | drivers/ntb/hw/idt/ntb_hw_idt.c:2409:28: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | "\t%hhu-%hhu.\t", idx + cnt - 1); - | drivers/ntb/hw/idt/ntb_hw_idt.c:2438:29: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | "\t%hhu-%hhu.\t", idx + cnt - 1); - | drivers/ntb/hw/idt/ntb_hw_idt.c:2484:15: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat], src); For the first two warnings the format specifier used is `%hhu` which describes a u8. Both `idx` and `cnt` are u8 as well. However, the expression as a whole is promoted to an int as you cannot get smaller-than-int from addition. Therefore, to fix the warning, use the promoted-to-type's format specifier -- in this case `%d`. example: `` uint8_t a = 4, b = 7; int size = sizeof(a + b - 1); printf("%d\n", size); // output: 4 ``` For the last warning, src is of type `int` while the format specifier describes a u8. The fix here is just to use the proper specifier `%d`. See more: (https://wiki.sei.cmu.edu/confluence/display/c/INT02-C.+Understand+integer+conversion+rules) "Integer types smaller than int are promoted when an operation is performed on them. If all values of the original type can be represented as an int, the value of the smaller type is converted to an int; otherwise, it is converted to an unsigned int." Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt Acked-by: Serge Semin Signed-off-by: Jon Mason

NTB: switch from 'pci_' to 'dma_' API

2021-09-05T22:08:14Z

The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET Acked-by: Serge Semin Signed-off-by: Jon Mason

ntb: idt: fix error check in ntb_hw_idt.c

2020-12-06T23:14:44Z

idt_create_dev never return NULL and fix smatch warning. Signed-off-by: Wang Qing Acked-by: Serge Semin Signed-off-by: Jon Mason

ntb: hw: remove the code that sets the DMA mask

2020-06-06T00:02:08Z

This patch removes the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Tested-by: Alexander Fomichev Signed-off-by: Sanjay R Mehta Signed-off-by: Jon Mason

PCI/AER: Rationalize error status register clearing

2020-03-28T18:19:05Z

The AER interfaces to clear error status registers were a confusing mess: - pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors from the Uncorrectable Error Status register. - pci_aer_clear_fatal_status() cleared fatal errors from the Uncorrectable Error Status register. - pci_cleanup_aer_error_status_regs() cleared the Root Error Status register (for Root Ports), the Uncorrectable Error Status register, and the Correctable Error Status register. Rename them to make them consistent: From To ---------------------------------------- ------------------------------- pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status() pci_aer_clear_fatal_status() pci_aer_clear_fatal_status() pci_cleanup_aer_error_status_regs() pci_aer_clear_status() Since pci_cleanup_aer_error_status_regs() (renamed to pci_aer_clear_status()) is only used within drivers/pci/, move the declaration from to drivers/pci/pci.h. [bhelgaas: commit log, add renames] Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: Bjorn Helgaas

NTB: fix IDT Kconfig typos/spellos

2019-09-23T21:20:40Z

Fix typos in drivers/ntb/hw/idt/Kconfig. Use consistent spelling and capitalization. Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support") Signed-off-by: Randy Dunlap Cc: Dave Jiang Cc: Allen Hubbe Cc: Serge Semin Signed-off-by: Jon Mason

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

drivers: Remove explicit invocations of mmiowb()

2019-04-08T11:01:02Z

mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds Signed-off-by: Will Deacon