kernel/drivers/net, branch linux-5.7.y

net: ena: Make missed_tx stat incremental

2020-08-27T07:30:49Z

[ Upstream commit ccd143e5150f24b9ba15145c7221b61dd9e41021 ] Most statistics in ena driver are incremented, meaning that a stat's value is a sum of all increases done to it since driver/queue initialization. This patch makes all statistics this way, effectively making missed_tx statistic incremental. Also added a comment regarding rx_drops and tx_drops to make it clearer how these counters are calculated. Fixes: 11095fdb712b ("net: ena: add statistics for missed tx packets") Signed-off-by: Shay Agroskin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: check for timeout

2020-08-26T09:42:23Z

[ Upstream commit 774d977abfd024e6f73484544b9abe5a5cd62de7 ] clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()

2020-08-26T09:42:23Z

[ Upstream commit c3d897e01aef8ddc43149e4d661b86f823e3aae7 ] netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the queue number, so the “skb->queue_mapping - 1” will be used. This may cause the last queue of VF not been used. Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called later will get the correct queue number, and VF will be able to use all queues. Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()

2020-08-26T09:42:22Z

[ Upstream commit cf96d977381d4a23957bade2ddf1c420b74a26b6 ] Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way, when probe fails, netdev can be freed automatically. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ena: Change WARN_ON expression in ena_del_napi_in_range()

2020-08-26T09:42:22Z

[ Upstream commit 8b147f6f3e7de4e51113e3e9ec44aa2debc02c58 ] The ena_del_napi_in_range() function unregisters the napi handler for rings in a given range. This function had the following WARN_ON macro: WARN_ON(ENA_IS_XDP_INDEX(adapter, i) && adapter->ena_napi[i].xdp_ring); This macro prints the call stack if the expression inside of it is true [1], but the expression inside of it is the wanted situation. The expression checks whether the ring has an XDP queue and its index corresponds to a XDP one. This patch changes the expression to !ENA_IS_XDP_INDEX(adapter, i) && adapter->ena_napi[i].xdp_ring which indicates an unwanted situation. Also, change the structure of the function. The napi handler is unregistered for all rings, and so there's no need to check whether the index is an XDP index or not. By removing this check the code becomes much more readable. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ena: Prevent reset after device destruction

2020-08-26T09:42:22Z

[ Upstream commit 63d4a4c145cca2e84dc6e62d2ef5cb990c9723c2 ] The reset work is scheduled by the timer routine whenever it detects that a device reset is required (e.g. when a keep_alive signal is missing). When releasing device resources in ena_destroy_device() the driver cancels the scheduling of the timer routine without destroying the reset work explicitly. This creates the following bug: The driver is suspended and the ena_suspend() function is called -> This function calls ena_destroy_device() to free the net device resources -> The driver waits for the timer routine to finish its execution and then cancels it, thus preventing from it to be called again. If, in its final execution, the timer routine schedules a reset, the reset routine might be called afterwards,and a redundant call to ena_restore_device() would be made. By changing the reset routine we allow it to read the device's state accurately. This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set before resetting the device and making both the destruction function and the flag check are under rtnl lock. The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction routine. Also surround the flag check with 'likely' because we expect that the reset routine would be called only when ENA_FLAG_TRIGGER_RESET flag is set. The destruction of the timer and reset services in __ena_shutoff() have to stay, even though the timer routine is destroyed in ena_destroy_device(). This is to avoid a case in which the reset routine is scheduled after free_netdev() in __ena_shutoff(), which would create an access to freed memory in adapter->flags. Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver") Signed-off-by: Shay Agroskin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bonding: fix active-backup failover for current ARP slave

2020-08-26T09:42:22Z

[ Upstream commit 0410d07190961ac526f05085765a8d04d926545b ] When the ARP monitor is used for link detection, ARP replies are validated for all slaves (arp_validate=3) and fail_over_mac is set to active, two slaves of an active-backup bond may get stuck in a state where both of them are active and pass packets that they receive to the bond. This state makes IPv6 duplicate address detection fail. The state is reached thus: 1. The current active slave goes down because the ARP target is not reachable. 2. The current ARP slave is chosen and made active. 3. A new slave is enslaved. This new slave becomes the current active slave and can reach the ARP target. As a result, the current ARP slave stays active after the enslave action has finished and the log is littered with "PROBE BAD" messages: > bond0: PROBE: c_arp ens10 && cas ens11 BAD The workaround is to remove the slave with "going back" status from the bond and re-enslave it. This issue was encountered when DPDK PMD interfaces were being enslaved to an active-backup bond. I would be possible to fix the issue in bond_enslave() or bond_change_active_slave() but the ARP monitor was fixed instead to keep most of the actions changing the current ARP slave in the ARP monitor code. The current ARP slave is set as inactive and backup during the commit phase. A new state, BOND_LINK_FAIL, has been introduced for slaves in the context of the ARP monitor. This allows administrators to see how slaves are rotated for sending ARP requests and attempts are made to find a new active slave. Fixes: b2220cad583c9 ("bonding: refactor ARP active-backup monitor") Signed-off-by: Jiri Wiesner Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ipvlan: fix device features

2020-08-26T09:42:18Z

[ Upstream commit d0f5c7076e01fef6fcb86988d9508bf3ce258bd4 ] Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose NETIF_F_LLTX feature because of the incorrect handling of features in ipvlan_fix_features(). --before-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Actual changes: vlan-challenged: off [fixed] tx-lockless: off [fixed] lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: off [fixed] lpaa10:~# --after-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Could not change any device features lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar Cc: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bonding: fix a potential double-unregister

2020-08-26T09:42:17Z

[ Upstream commit 832707021666411d04795c564a4adea5d6b94f17 ] When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue. If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice. Workaround this special case by checking reg_state. Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()") Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com Cc: Eric Dumazet Cc: Andy Gospodarek Cc: Jay Vosburgh Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bonding: show saner speed for broadcast mode

2020-08-26T09:42:17Z

[ Upstream commit 4ca0d9ac3fd8f9f90b72a15d8da2aca3ffb58418 ] Broadcast mode bonds transmit a copy of all traffic simultaneously out of all interfaces, so the "speed" of the bond isn't really the aggregate of all interfaces, but rather, the speed of the slowest active interface. Also, the type of the speed field is u32, not unsigned long, so adjust that accordingly, as required to make min() function here without complaining about mismatching types. Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool") CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: "David S. Miller" CC: netdev@vger.kernel.org Acked-by: Jay Vosburgh Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller Signed-off-by: Sasha Levin