kernel/drivers/net, branch linux-4.15.y

rtl8187: Fix NULL pointer dereference in priv->conf_mutex

2018-04-19T06:55:13Z

commit 7972326a26b5bf8dc2adac575c4e03ee7e9d193a upstream. This can be reproduced by bind/unbind the driver multiple times in AM3517 board. Analysis revealed that rtl8187_start() was invoked before probe finishes(ie. before the mutex is initialized). INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (register_lock_class+0x4f4/0x55c) [] (register_lock_class) from [] (__lock_acquire+0x74/0x1938) [] (__lock_acquire) from [] (lock_acquire+0xfc/0x23c) [] (lock_acquire) from [] (mutex_lock_nested+0x50/0x3b0) [] (mutex_lock_nested) from [] (rtl8187_start+0x2c/0xd54) [] (rtl8187_start) from [] (drv_start+0xa8/0x320) [] (drv_start) from [] (ieee80211_do_open+0x2bc/0x8e4) [] (ieee80211_do_open) from [] (__dev_open+0xb8/0x120) [] (__dev_open) from [] (__dev_change_flags+0x88/0x14c) [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48) [] (dev_change_flags) from [] (devinet_ioctl+0x738/0x840) [] (devinet_ioctl) from [] (sock_ioctl+0x164/0x2f4) [] (sock_ioctl) from [] (do_vfs_ioctl+0x8c/0x9d0) [] (do_vfs_ioctl) from [] (SyS_ioctl+0x6c/0x7c) [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x1c) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = cd1ec000 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) task: ce73eec0 task.stack: cd1ea000 PC is at mutex_lock_nested+0xe8/0x3b0 LR is at mutex_lock_nested+0xd0/0x3b0 Cc: stable@vger.kernel.org Signed-off-by: Sudhir Sreedharan Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

ath9k: Protect queue draining by rcu_read_lock()

2018-04-19T06:55:09Z

commit 182b1917109892ab9f26d66bfdcbc4ba6f0a0a65 upstream. When ath9k was switched over to use the mac80211 intermediate queues, node cleanup now drains the mac80211 queues. However, this call path is not protected by rcu_read_lock() as it was previously entirely internal to the driver which uses its own locking. This leads to a possible rcu_dereference() without holding rcu_read_lock(); but only if a station is cleaned up while having packets queued on the TXQ. Fix this by adding the rcu_read_lock() to the caller in ath9k. Fixes: 50f08edf9809 ("ath9k: Switch to using mac80211 intermediate software queues.") Cc: stable@vger.kernel.org Reported-by: Ben Greear Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

lan78xx: Correctly indicate invalid OTP

2018-04-19T06:55:08Z

[ Upstream commit 4bfc33807a9a02764bdd1e42e794b3b401240f27 ] lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP content, but the value gets overwritten before it is returned and the read goes ahead anyway. Make the read conditional as it should be and preserve the error code. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Phil Elwell Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

slip: Check if rstate is initialized before uncompressing

2018-04-19T06:55:07Z

[ Upstream commit 3f01ddb962dc506916c243f9524e8bef97119b77 ] On receiving a packet the state index points to the rstate which must be used to fill up IP and TCP headers. But if the state index points to a rstate which is unitialized, i.e. filled with zeros, it gets stuck in an infinite loop inside ip_fast_csum trying to compute the ip checsum of a header with zero length. 89.666953: <2> [] slhc_uncompress+0x464/0x468 89.666965: <2> [] ppp_receive_nonmp_frame+0x3b4/0x65c 89.666978: <2> [] ppp_receive_frame+0x64/0x7e0 89.666991: <2> [] ppp_input+0x104/0x198 89.667005: <2> [] pppopns_recv_core+0x238/0x370 89.667027: <2> [] __sk_receive_skb+0xdc/0x250 89.667040: <2> [] pppopns_recv+0x44/0x60 89.667053: <2> [] __sock_queue_rcv_skb+0x16c/0x24c 89.667065: <2> [] sock_queue_rcv_skb+0x2c/0x38 89.667085: <2> [] raw_rcv+0x124/0x154 89.667098: <2> [] raw_local_deliver+0x1e0/0x22c 89.667117: <2> [] ip_local_deliver_finish+0x70/0x24c 89.667131: <2> [] ip_local_deliver+0x100/0x10c ./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output: ip_fast_csum at arch/arm64/include/asm/checksum.h:40 (inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615 Adding a variable to indicate if the current rstate is initialized. If such a packet arrives, move to toss state. Signed-off-by: Tejaswi Tanikella Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN

2018-04-19T06:55:07Z

[ Upstream commit 53765341ee821c0a0f1dec41adc89c9096ad694c ] The Cinterion AHS8 is a 3G device with one embedded WWAN interface using cdc_ether as a driver. The modem is controlled via AT commands through the exposed TTYs. AT+CGDCONT write command can be used to activate or deactivate a WWAN connection for a PDP context defined with the same command. UE supports one WWAN adapter. Signed-off-by: Bassem Boubaker Acked-by: Oliver Neukum Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/mlx4_core: Fix memory leak while delete slave's resources

2018-04-12T10:31:21Z

[ Upstream commit 461d5f1b59490ce0096dfda45e10038c122a7892 ] mlx4_delete_all_resources_for_slave in resource tracker should free all memory allocated for a slave. While releasing memory of fs_rule, it misses releasing memory of fs_rule->mirr_mbox. Fixes: 78efed275117 ('net/mlx4_core: Support mirroring VF DMFS rules on both ports') Signed-off-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: move dev_mc_sync after master_upper_dev_link in team_port_add

2018-04-12T10:31:21Z

[ Upstream commit 982cf3b3999d39a2eaca0a65542df33c19b5d814 ] The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave' is needed for team driver. The panic can be reproduced easily: ip link add team1 type team ip link set team1 up ip link add link team1 vlan1 type vlan id 80 ip link set vlan1 master team1 Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Xin Long Acked-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Fix traffic being dropped on VF representor

2018-04-12T10:31:20Z

[ Upstream commit 4246f698dd58e3c6246fa919ef0b0a1d29a57e4a ] Increase representor netdev RQ size to avoid dropped packets. The current size (two) is just too small to keep up with conventional slow path traffic patterns. Also match the SQ size to the RQ size. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Roi Dayan Reviewed-by: Paul Blakey Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx4_en: Fix mixed PFC and Global pause user control requests

2018-04-12T10:31:20Z

[ Upstream commit 6e8814ceb7e8f468659ef9253bd212c07ae19584 ] Global pause and PFC configuration should be mutually exclusive (i.e. only one of them at most can be set). However, once PFC was turned off, driver automatically turned Global pause on. This is a bug. Fix the driver behaviour to turn off PFC/Global once the user turned the other on. This also fixed a weird behaviour that at a current time, the profile had both PFC and global pause configuration turned on, which is Hardware-wise impossible and caused returning false positive indication to query tools. In addition, fix error code when setting global pause or PFC to change metadata only upon successful change. Also, removed useless debug print. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Sync netdev vxlan ports at open

2018-04-12T10:31:20Z

[ Upstream commit a117f73dc2430443f23e18367fa545981129c1a6 ] When mlx5_core is loaded it is expected to sync ports with all vxlan devices so it can support vxlan encap/decap. This is done via udp_tunnel_get_rx_info(). Currently this call is set in mlx5e_nic_enable() and if the netdev is not in NETREG_REGISTERED state it will not be called. Normally on load the netdev state is not NETREG_REGISTERED so udp_tunnel_get_rx_info() will not be called. Moving udp_tunnel_get_rx_info() to mlx5e_open() so it will be called on netdev UP event and allow encap/decap. Fixes: 610e89e05c3f ("net/mlx5e: Don't sync netdev state when not registered") Signed-off-by: Shahar Klein Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman