kernel/drivers/net/wireless, branch linux-4.15.y

rtl8187: Fix NULL pointer dereference in priv->conf_mutex

2018-04-19T06:55:13Z

commit 7972326a26b5bf8dc2adac575c4e03ee7e9d193a upstream. This can be reproduced by bind/unbind the driver multiple times in AM3517 board. Analysis revealed that rtl8187_start() was invoked before probe finishes(ie. before the mutex is initialized). INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (register_lock_class+0x4f4/0x55c) [] (register_lock_class) from [] (__lock_acquire+0x74/0x1938) [] (__lock_acquire) from [] (lock_acquire+0xfc/0x23c) [] (lock_acquire) from [] (mutex_lock_nested+0x50/0x3b0) [] (mutex_lock_nested) from [] (rtl8187_start+0x2c/0xd54) [] (rtl8187_start) from [] (drv_start+0xa8/0x320) [] (drv_start) from [] (ieee80211_do_open+0x2bc/0x8e4) [] (ieee80211_do_open) from [] (__dev_open+0xb8/0x120) [] (__dev_open) from [] (__dev_change_flags+0x88/0x14c) [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48) [] (dev_change_flags) from [] (devinet_ioctl+0x738/0x840) [] (devinet_ioctl) from [] (sock_ioctl+0x164/0x2f4) [] (sock_ioctl) from [] (do_vfs_ioctl+0x8c/0x9d0) [] (do_vfs_ioctl) from [] (SyS_ioctl+0x6c/0x7c) [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x1c) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = cd1ec000 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) task: ce73eec0 task.stack: cd1ea000 PC is at mutex_lock_nested+0xe8/0x3b0 LR is at mutex_lock_nested+0xd0/0x3b0 Cc: stable@vger.kernel.org Signed-off-by: Sudhir Sreedharan Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

ath9k: Protect queue draining by rcu_read_lock()

2018-04-19T06:55:09Z

commit 182b1917109892ab9f26d66bfdcbc4ba6f0a0a65 upstream. When ath9k was switched over to use the mac80211 intermediate queues, node cleanup now drains the mac80211 queues. However, this call path is not protected by rcu_read_lock() as it was previously entirely internal to the driver which uses its own locking. This leads to a possible rcu_dereference() without holding rcu_read_lock(); but only if a station is cleaned up while having packets queued on the TXQ. Fix this by adding the rcu_read_lock() to the caller in ath9k. Fixes: 50f08edf9809 ("ath9k: Switch to using mac80211 intermediate software queues.") Cc: stable@vger.kernel.org Reported-by: Ben Greear Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

wl1251: check return from call to wl1251_acx_arp_ip_filter

2018-04-12T10:31:08Z

[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ] Currently the less than zero error check on ret is incorrect as it is checking a far earlier ret assignment rather than the return from the call to wl1251_acx_arp_ip_filter. Fix this by adding in the missing assginment. Detected by CoverityScan, CID#1164835 ("Logically dead code") Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering") Signed-off-by: Colin Ian King Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rt2x00: do not pause queue unconditionally on error path

2018-04-12T10:31:08Z

[ Upstream commit 6dd80efd75ce7c2dbd9f117cf585ee2b33a42ee1 ] Pausing queue without checking threshold is racy with txdone path. Moreover we do not need pause queue on any error, but only if queue is full - in case when we send RTS frame ( other cases of almost full queue are already handled in rt2x00queue_write_tx_frame() ). Patch fixes of theoretically possible problem of pausing empty queue. Signed-off-by: Stanislaw Gruszka Tested-by: Enrico Mioso Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl8723be: Fix loss of signal

2018-03-28T16:23:00Z

commit 78dc897b7ee67205423dbbc6b56be49fb18d15b5 upstream. In commit c713fb071edc ("rtlwifi: rtl8821ae: Fix connection lost problem correctly") a problem in rtl8821ae that caused loss of signal was fixed. That same problem has now been reported for rtl8723be. Accordingly, the ASPM L1 latency has been increased from 0 to 7 to fix the instability. Signed-off-by: Larry Finger Cc: Stable Tested-by: James Cameron Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

brcmfmac: fix P2P_DEVICE ethernet address generation

2018-03-28T16:23:00Z

commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b upstream. The firmware has a requirement that the P2P_DEVICE address should be different from the address of the primary interface. When not specified by user-space, the driver generates the MAC address for the P2P_DEVICE interface using the MAC address of the primary interface and setting the locally administered bit. However, the MAC address of the primary interface may already have that bit set causing the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this by using a random address instead to determine the P2P_DEVICE address. Cc: stable@vger.kernel.org # 3.10.y Reported-by: Hans de Goede Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

ath10k: handling qos at STA side based on AP WMM enable/disable

2018-03-24T10:02:45Z

[ Upstream commit 07ffb4497360ae8789f05555fec8171ee952304d ] Data packets are not sent by STA in case of STA joined to non QOS AP (WMM disabled AP). This is happening because of STA is sending data packets to firmware from host with qos enabled along with non qos queue value(TID = 16). Due to qos enabled, firmware is discarding the packet. This patch fixes this issue by updating the qos based on station WME capability field if WMM is disabled in AP. This patch is required by 10.4 family chipsets like QCA4019/QCA9888/QCA9884/QCA99X0. Firmware Versoin : 10.4-3.5.1-00018. For 10.2.4 family chipsets QCA988X/QCA9887 and QCA6174 this patch has no effect. Signed-off-by: Balaji Pothunoori Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rtlwifi: always initialize variables given to RT_TRACE()

2018-03-24T10:02:45Z

[ Upstream commit e4779162f7377baa9fb9a044555ecaae22c3f125 ] In rtl_rx_ampdu_apply(), when rtlpriv->cfg->ops->get_btc_status() returns false, RT_TRACE() is called with the values of variables reject_agg and agg_size, which have not been initialized. Always initialize these variables in order to prevent using uninitialized values. This issue has been found with clang. The compiler reported: drivers/net/wireless/realtek/rtlwifi/base.c:1665:6: error: variable 'agg_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (rtlpriv->cfg->ops->get_btc_status()) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/base.c:1671:31: note: uninitialized use occurs here reject_agg, ctrl_agg_size, agg_size); ^~~~~~~~ drivers/net/wireless/realtek/rtlwifi/base.c:1665:6: error: variable 'reject_agg' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (rtlpriv->cfg->ops->get_btc_status()) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/base.c:1671:4: note: uninitialized use occurs here reject_agg, ctrl_agg_size, agg_size); ^~~~~~~~~~ Fixes: 2635664e6e4a ("rtlwifi: Add rx ampdu cfg for btcoexist.") Signed-off-by: Nicolas Iooss Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.

2018-03-24T10:02:45Z

[ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ] Reset the driver current tx read/write index to zero when inactiveps nic out of sync with HW state. Wrong driver tx read/write index will cause Tx fail. Signed-off-by: Tsang-Shian Lin Signed-off-by: Ping-Ke Shih Signed-off-by: Larry Finger Cc: Yan-Hsuan Chuang Cc: Birming Chiu Cc: Shaofu Cc: Steven Ting Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED

2018-03-19T08:09:59Z

[ Upstream commit e16ea4bb516bc21ea2202f2107718b29218bea59 ] Enforce using PS_MANUAL_POLL in ps hwsim debugfs to trigger a poll, only if PS_ENABLED was set before. This is required due to commit c9491367b759 ("mac80211: always update the PM state of a peer on MGMT / DATA frames") that enforces the ap to check only mgmt/data frames ps bit, and then update station's power save accordingly. When sending only ps-poll (control frame) the ap will not be aware that the station entered power save. Setting ps enable before triggering ps_poll, will send NDP with PM bit enabled first. Signed-off-by: Adiel Aloni Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman