kernel/drivers/net/wireless/ti, branch linux-4.1.y

wl1251: check return from call to wl1251_acx_arp_ip_filter

2018-05-23T01:36:26Z

[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ] Currently the less than zero error check on ret is incorrect as it is checking a far earlier ret assignment rather than the return from the call to wl1251_acx_arp_ip_filter. Fix this by adding in the missing assginment. Detected by CoverityScan, CID#1164835 ("Logically dead code") Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering") Signed-off-by: Colin Ian King Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

wl1251: add a missing spin_lock_init()

2017-10-04T01:36:42Z

[ Upstream commit 6e9aae179f290f1a44fce7ef8e9a8e2dd68ed1e4 ] This fixes the following kernel warning: [ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745 [ 5668.771850] lock: 0xce63ef20, .magic: 00000000, .owner: /-1, .owner_cpu: 0 [ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G W 4.12.0-03002-gec979a4-dirty #40 [ 5668.772796] Hardware name: Nokia RX-51 board [ 5668.773071] Workqueue: phy1 wl1251_irq_work [ 5668.773345] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 5668.773803] [] (show_stack) from [] (do_raw_spin_lock+0x6c/0xa0) [ 5668.774230] [] (do_raw_spin_lock) from [] (_raw_spin_lock_irqsave+0x10/0x18) [ 5668.774658] [] (_raw_spin_lock_irqsave) from [] (wl1251_op_tx+0x38/0x5c) [ 5668.775115] [] (wl1251_op_tx) from [] (ieee80211_tx_frags+0x188/0x1c0) [ 5668.775543] [] (ieee80211_tx_frags) from [] (__ieee80211_tx+0x6c/0x130) [ 5668.775970] [] (__ieee80211_tx) from [] (ieee80211_tx+0xdc/0x104) [ 5668.776367] [] (ieee80211_tx) from [] (__ieee80211_subif_start_xmit+0x454/0x8c8) [ 5668.776824] [] (__ieee80211_subif_start_xmit) from [] (ieee80211_subif_start_xmit+0x30/0x2fc) [ 5668.777343] [] (ieee80211_subif_start_xmit) from [] (dev_hard_start_xmit+0x80/0x118) ... by adding the missing spin_lock_init(). Reported-by: Pavel Machek Cc: Kalle Valo Signed-off-by: Cong Wang Acked-by: Pavel Machek Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

wlcore/wl12xx: spi: fix NULL pointer dereference (Oops)

2016-02-01T19:54:02Z

[ Upstream commit e47301b06d5a65678690f04c2248fd181db1e59a ] Fix the below Oops when trying to modprobe wlcore_spi. The oops occurs because the wl1271_power_{off,on}() function doesn't check the power() function pointer. [ 23.401447] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 23.409954] pgd = c0004000 [ 23.412922] [00000000] *pgd=00000000 [ 23.416693] Internal error: Oops: 80000007 [#1] SMP ARM [ 23.422168] Modules linked in: wl12xx wlcore mac80211 cfg80211 musb_dsps musb_hdrc usbcore usb_common snd_soc_simple_card evdev joydev omap_rng wlcore_spi snd_soc_tlv320aic23_i2c rng_core snd_soc_tlv320aic23 c_can_platform c_can can_dev snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap omap_wdt musb_am335x cpufreq_dt thermal_sys hwmon [ 23.453253] CPU: 0 PID: 36 Comm: kworker/0:2 Not tainted 4.2.0-00002-g951efee-dirty #233 [ 23.461720] Hardware name: Generic AM33XX (Flattened Device Tree) [ 23.468123] Workqueue: events request_firmware_work_func [ 23.473690] task: de32efc0 ti: de4ee000 task.ti: de4ee000 [ 23.479341] PC is at 0x0 [ 23.482112] LR is at wl12xx_set_power_on+0x28/0x124 [wlcore] [ 23.488074] pc : [<00000000>] lr : [] psr: 60000013 [ 23.488074] sp : de4efe50 ip : 00000002 fp : 00000000 [ 23.500162] r10: de7cdd00 r9 : dc848800 r8 : bf27af00 [ 23.505663] r7 : bf27a1a8 r6 : dcbd8a80 r5 : dce0e2e0 r4 : dce0d2e0 [ 23.512536] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : dc848810 [ 23.519412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 23.527109] Control: 10c5387d Table: 9cb78019 DAC: 00000015 [ 23.533160] Process kworker/0:2 (pid: 36, stack limit = 0xde4ee218) [ 23.539760] Stack: (0xde4efe50 to 0xde4f0000) [...] [ 23.665030] [] (wl12xx_set_power_on [wlcore]) from [] (wlcore_nvs_cb+0x118/0xa4c [wlcore]) [ 23.675604] [] (wlcore_nvs_cb [wlcore]) from [] (request_firmware_work_func+0x30/0x58) [ 23.685784] [] (request_firmware_work_func) from [] (process_one_work+0x1b4/0x4b4) [ 23.695591] [] (process_one_work) from [] (worker_thread+0x3c/0x4a4) [ 23.704124] [] (worker_thread) from [] (kthread+0xd4/0xf0) [ 23.711747] [] (kthread) from [] (ret_from_fork+0x14/0x3c) [ 23.719357] Code: bad PC value [ 23.722760] ---[ end trace 981be8510db9b3a9 ]--- Prevent oops by validationg power() pointer value before calling the function. Signed-off-by: Uri Mashiach Cc: stable@vger.kernel.org Acked-by: Igor Grinberg Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

wlcore/wl12xx: spi: fix oops on firmware load

2016-02-01T16:37:29Z

[ Upstream commit 9b2761cb72dc41e1948c8a5512b4efd384eda130 ] The maximum chunks used by the function is (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE + 1). The original commands array had space for (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) commands. When the last chunk is used (len > 4 * WSPI_MAX_CHUNK_SIZE), the last command is stored outside the bounds of the commands array. Oops 5 (page fault) is generated during current wl1271 firmware load attempt: root@debian-armhf:~# ifconfig wlan0 up [ 294.312399] Unable to handle kernel paging request at virtual address 00203fc4 [ 294.320173] pgd = de528000 [ 294.323028] [00203fc4] *pgd=00000000 [ 294.326916] Internal error: Oops: 5 [#1] SMP ARM [ 294.331789] Modules linked in: bnep rfcomm bluetooth ipv6 arc4 wl12xx wlcore mac80211 musb_dsps cfg80211 musb_hdrc usbcore usb_common wlcore_spi omap_rng rng_core musb_am335x omap_wdt cpufreq_dt thermal_sys hwmon [ 294.351838] CPU: 0 PID: 1827 Comm: ifconfig Not tainted 4.2.0-00002-g3e9ad27-dirty #78 [ 294.360154] Hardware name: Generic AM33XX (Flattened Device Tree) [ 294.366557] task: dc9d6d40 ti: de550000 task.ti: de550000 [ 294.372236] PC is at __spi_validate+0xa8/0x2ac [ 294.376902] LR is at __spi_sync+0x78/0x210 [ 294.381200] pc : [] lr : [] psr: 60000013 [ 294.381200] sp : de551998 ip : de5519d8 fp : 00200000 [ 294.393242] r10: de551c8c r9 : de5519d8 r8 : de3a9000 [ 294.398730] r7 : de3a9258 r6 : de3a9400 r5 : de551a48 r4 : 00203fbc [ 294.405577] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : de3a9000 [ 294.412420] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 294.419918] Control: 10c5387d Table: 9e528019 DAC: 00000015 [ 294.425954] Process ifconfig (pid: 1827, stack limit = 0xde550218) [ 294.432437] Stack: (0xde551998 to 0xde552000) ... [ 294.883613] [] (__spi_validate) from [] (__spi_sync+0x78/0x210) [ 294.891670] [] (__spi_sync) from [] (wl12xx_spi_raw_write+0xfc/0x148 [wlcore_spi]) [ 294.901661] [] (wl12xx_spi_raw_write [wlcore_spi]) from [] (wlcore_boot_upload_firmware+0x1ec/0x458 [wlcore]) [ 294.914038] [] (wlcore_boot_upload_firmware [wlcore]) from [] (wl12xx_boot+0xc10/0xfac [wl12xx]) [ 294.925161] [] (wl12xx_boot [wl12xx]) from [] (wl1271_op_add_interface+0x5b0/0x910 [wlcore]) [ 294.936364] [] (wl1271_op_add_interface [wlcore]) from [] (ieee80211_do_open+0x44c/0xf7c [mac80211]) [ 294.947963] [] (ieee80211_do_open [mac80211]) from [] (__dev_open+0xa8/0x110) [ 294.957307] [] (__dev_open) from [] (__dev_change_flags+0x88/0x148) [ 294.965713] [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48) [ 294.974576] [] (dev_change_flags) from [] (devinet_ioctl+0x6b4/0x7d0) [ 294.983191] [] (devinet_ioctl) from [] (sock_ioctl+0x1e4/0x2bc) [ 294.991244] [] (sock_ioctl) from [] (do_vfs_ioctl+0x420/0x6b0) [ 294.999208] [] (do_vfs_ioctl) from [] (SyS_ioctl+0x6c/0x7c) [ 295.006880] [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x54) [ 295.014835] Code: e1550004 e2444034 0a00007d e5953018 (e5942008) [ 295.021544] ---[ end trace 66ed188198f4e24e ]--- Signed-off-by: Uri Mashiach Acked-by: Igor Grinberg Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-04-22T16:09:46Z

Pull ARM DT updates from Olof Johansson: "As always, this tends to be one of our bigger branches. There are lots of updates this release, but not that many jumps out as something that needs more detailed coverage. Some of the highlights are: - DTs for the new Annapurna Labs Alpine platform - more graphics DT pieces falling into place on Exynos, bridges, clocks. - plenty of DT updates for Qualcomm platforms for various IP blocks - some churn on Tegra due to switch-over to tool-generated pinctrl data - misc fixes and updates for Atmel at91 platforms - various DT updates to add IP block support on Broadcom's Cygnus platforms - more updates for Renesas platforms as DT support is added for various IP blocks (IPMMU, display, audio, etc)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits) ARM: dts: alpine: add internal pci Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135." ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB ARM: dts: qcom: Add idle state device nodes for 8064 ARM: dts: qcom: Add idle states device nodes for 8084 ARM: dts: qcom: Add idle states device nodes for 8974/8074 ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs devicetree: bindings: Document qcom,idle-states devicetree: bindings: Update qcom,saw2 node bindings dt-bindings: Add #defines for MSM8916 clocks and resets arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974 arm: dts: qcom: Add LCC nodes arm: dts: qcom: Add TCSR support for MSM8960 arm: dts: qcom: Add TCSR support for MSM8660 arm: dts: qcom: Add TCSR support for IPQ8064 ...

wl1251: Fix typo in MODULE_DESCRIPTION in wl1251/main.c

2015-04-07T17:13:57Z

This patch fix a spelling typo in MODULE_DESCRIPTION in wl1251/main.c Signed-off-by: Masanari Iida Signed-off-by: Kalle Valo

Merge tag 'wireless-drivers-next-for-davem-2015-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

2015-04-01T18:27:28Z

Kalle Valo says: ==================== Major changes: ath9k: * add Active Interference Cancellation, a method implemented in the HW to counter WLAN RX > sensitivity degradation when BT is transmitting at the same time. This feature is supported by cards like WB222 based on AR9462. iwlwifi: * Location Aware Regulatory was added by Arik * 8000 device family work * update to the BT Coex firmware API brmcfmac: * add new BCM43455 and BCM43457 SDIO device support * add new BCM43430 SDIO device support wil6210: * take care of AP bridging * fix NAPI behavior * found approach to achieve 4*n+2 alignment of Rx frames rt2x00: * add new rt2800usb device DWA 130 rtlwifi: * add USB ID for D-Link DWA-131 * add USB ID ASUS N10 WiFi dongle mwifiex: * throughput enhancements ==================== Signed-off-by: David S. Miller

Merge tag 'mac80211-next-for-davem-2015-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

2015-03-31T20:39:04Z

Johannes Berg says: ==================== Lots of updates for net-next; along with the usual flurry of small fixes, cleanups and internal features we have: * VHT support for TDLS and IBSS (conditional on drivers though) * first TX performance improvements (the biggest will come later) * many suspend/resume (race) fixes * name_assign_type support from Tom Gundersen ==================== Signed-off-by: David S. Miller

wlcore: remove wl12xx_platform_data

2015-03-24T16:48:14Z

Now that we have wlcore device-tree bindings in place (for both wl12xx and wl18xx), remove the legacy wl12xx_platform_data struct, and move its members into the platform device data (that is passed to wlcore) Davinci 850 is the only platform that still set the platform data in the legacy way (and doesn't have DT bindings), so remove the relevant code/Kconfig option from the board file (as suggested by Sekhar Nori) Since no one currently uses wlcore_spi, simply remove its platform data support (DT bindings will have to be added if someone actually needs it) Signed-off-by: Luciano Coelho Signed-off-by: Eliad Peller Tested-by: Nikita Kiryanov Acked-by: Kalle Valo Acked-by: Sekhar Nori Signed-off-by: Tony Lindgren

wlcore: add device-tree support

2015-03-24T16:48:14Z

When running with device-tree, we no longer have a board file that can set up the platform data for wlcore. Allow this data to be passed from DT. Signed-off-by: Ido Yariv Signed-off-by: Eliad Peller Tested-by: Sébastien Szymanski Tested-by: Nikita Kiryanov Acked-by: Kalle Valo Signed-off-by: Tony Lindgren