kernel/drivers/net/wireless/rt2x00/rt2800lib.c, branch linux-4.1.y

cfg80211: remove "channel" from survey names

2015-01-08T14:27:52Z

All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg

rt2800: calculate tx power temperature compensation on selected chips

2014-12-01T20:57:20Z

Currently implemented temperature compensation is only valid on some of supported chips. Other chips do not need temperature compensation or need different way to do this (not yet implemented in the rt2800 driver). Trying to do run rt2800_get_gain_calibration_delta() when this is not appropriate on particular chip gives bogus result of TX power and can make connection unstable. This is follow up to commit 8c8d2017ba25c510ddf093419048460db1109bc4 "rt2800: fix RT5390 & RT3290 TX power settings regression". On that commit we avoid setting BBP_R1 register, but the real problem is wrong temperature compensation calculation. Reported-and-tested-by: Ronald Wahl Debugged-by: Ronald Wahl Cc: Mike Romberg Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville

rt2x00: support Ralink 5362.

2014-08-28T18:49:39Z

Signed-off-by: Canek Peláez Valdés Signed-off-by: John W. Linville

rt2x00: do not initialize BCN_OFFSET registers

2014-06-19T19:49:15Z

We setup BCN_OFFSET{0,1} registers dynamically, don't have to initialize them. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville

rt2x00: change default MAC_BSSID_DW1_BSS_BCN_NUM

2014-06-19T19:49:15Z

We setup MAC_BSSID_DW1_BSS_BCN_NUM dynamically when numbers of active beacons increase. Change default to 0 to tell hardware that we want to send only one beacon as default. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville

rt2x00: change beaconing setup on RT2800

2014-06-19T19:49:15Z

As reported by Matthias, on 5572 chip, even if we clear up TXWI of corresponding beacon, hardware still try to send it or do other action that increase power consumption peak up to 1A. To avoid the issue, setup beaconing dynamically by configuring offsets of currently active beacons and MAC_BSSID_DW1_BSS_BCN_NUM variable, which limit number of beacons that hardware will try to send. Reported-by: Matthias Fend Signed-off-by: Stanislaw Gruszka Acked-by: Helmut Schaa Signed-off-by: John W. Linville

rt2x00: restore original beaconing state

2014-04-22T19:06:31Z

After changing local per interface beacon setting restore original global beaconing state. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville

Revert "rt2x00: rt2800lib: Update BBP register initialization for RT53xx"

2014-03-13T18:57:27Z

This reverts commit eac40d9631a7db43570df859fa8a9922e9623607. It cause random connection drops on RT5390 PCI adapters. On Mediatek there is different driver version available for RT53xx chip based on bus type (2.5.0.3 for PCI and 2.6.1.3 for USB). Hence possibly we should set registers differently based on bus type. But is also possible that new driver (i.e. 2.6.1.3) was not verified on RT53xx USB. Until we figure out how to initialize registers properly for RT53xx just revert commit eac40d9631a7db43570df859fa8a9922e9623607 since it cause regression. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville

rt2800: disable PS by default on USB

2014-02-04T20:30:06Z

We have disabled it currently on other buses. PS can cause some issues, not necessarily with our driver but on AP, that are not easy to debug. Since behaviour differs on rt2800usb and rt2800pci, user usually blame for malfunction rt2800usb driver, whereas issue is on AP side. Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville

rt2x00: Fix FSF address in file headers

2013-12-11T15:56:19Z

Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Ivo van Doorn CC: Gertjan van Wingerde CC: Helmut Schaa Signed-off-by: Jeff Kirsher Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville