kernel/drivers/net/wireless/rsi, branch linux-4.16.y

rsi: fix kernel panic observed on 64bit machine

2018-05-30T06:17:28Z

[ Upstream commit 864db4d5085349fcfa1f260b5bcd2adde3d7f2ed ] Following kernel panic is observed on 64bit machine while loading the driver. It is fixed if we pass dynamically allocated memory to SDIO for DMA. BUG: unable to handle kernel paging request at ffffeb04000172e0 IP: sg_miter_stop+0x56/0x70 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: rsi_sdio(OE+) rsi_91x(OE) btrsi(OE) rfcomm bluetooth ecdh_generic mac80211 mmc_block fuse xt_CHECKSUM iptable_mangle drm_kms_helper mmc_core serio_raw drm firewire_ohci tg3 CPU: 0 PID: 4003 Comm: insmod Tainted: G OE 4.16.0-rc1+ #27 Hardware name: Dell Inc. Latitude E5500 /0DW634, BIOS A19 06/13/2013 RIP: 0010:sg_miter_stop+0x56/0x70 RSP: 0018:ffff88007d003e78 EFLAGS: 00010002 RAX: 0000000000000003 RBX: 0000000000000004 RCX: 0000000000000000 RDX: ffffeb04000172c0 RSI: ffff88002f58002c RDI: ffff88007d003e80 RBP: 0000000000000004 R08: ffff88007d003e80 R09: 0000000000000008 R10: 0000000000000003 R11: 0000000000000001 R12: 0000000000000004 R13: ffff88002f580028 R14: 0000000000000000 R15: 0000000000000004 FS: 00007f35c29db700(0000) GS:ffff88007d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffeb04000172e0 CR3: 000000007038e000 CR4: 00000000000406f0 Call Trace: sg_copy_buffer+0xc6/0xf0 sdhci_tasklet_finish+0x170/0x260 [sdhci] tasklet_action+0xf4/0x100 __do_softirq+0xef/0x26e irq_exit+0xbe/0xd0 do_IRQ+0x4a/0xc0 common_interrupt+0xa2/0xa2 Signed-off-by: Amitkumar Karwar Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rsi: fix memory leak on buf and usb_reg_buf

2017-11-18T01:32:41Z

In the cases where len is too long, the error return path fails to kfree allocated buffers buf and usb_reg_buf. The simplest fix is to perform the sanity check on len before the allocations to avoid having to do the kfree'ing in the first place. Detected by CoverityScan, CID#1452258,1452259 ("Resource Leak") Fixes: 59f73e2ae185 ("rsi: check length before USB read/write register") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller

rsi: rsi_91x_ps: remove redundant code in str_psstate

2017-11-10T02:36:10Z

"INVALID_STATE" is already being returned in the default case and this code cannot be reached. Addresses-Coverity-ID: 1398384 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Kalle Valo

Merge tag 'wireless-drivers-next-for-davem-2017-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

2017-11-04T09:07:50Z

Kalle Valo says: ==================== wireless-drivers-next patches for 4.15 Mostly fixes this time, but also few new features. Major changes: wil6210 * remove ssid debugfs file rsi * add WOWLAN support for suspend, hibernate and shutdown states ath10k * add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware where it's supported (QCA99x0 and QCA4019) ==================== Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-11-04T00:26:51Z

Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller

rsi: fix kbuild reported build errors with CONFIG_PM off

2017-11-02T17:38:14Z

Some wowlan related code was outside CONFIG_PM flag which caused these build errors. They are fixed by moving that code under CONFIG_PM flag. Reported-by: kbuild test robot Fixes: ef71ed0608c ("rsi: sdio: Add WOWLAN support for S5 shutdown state") Fixes: a24e35fcee0 ("rsi: sdio: Add WOWLAN support for S4 hibernate state") Fixes: e1ced6422a3 ("rsi: sdio: add WOWLAN support for S3 suspend state") Signed-off-by: Amitkumar Karwar Signed-off-by: Kalle Valo

rsi: move rsi_sdio_reinit_device() out of CONFIG_PM

2017-11-02T17:38:14Z

This function is generic. It doesn't contain wowlan specific code. It should not be under CONFIG_PM. This patch resolves compilation errors observed when CONFIG_PM flag is disabled. Reported-by: kbuild test robot Fixes: ef71ed0608c ("rsi: sdio: Add WOWLAN support for S5 shutdown state") Fixes: a24e35fcee0 ("rsi: sdio: Add WOWLAN support for S4 hibernate state") Fixes: e1ced6422a3 ("rsi: sdio: add WOWLAN support for S3 suspend state") Signed-off-by: Amitkumar Karwar Signed-off-by: Kalle Valo

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

rsi: sdio: Add WOWLAN support for S5 shutdown state

2017-10-30T10:50:13Z

Unlike other power states, WoWLAN configuration does not come from mac80211 for shutdown. Hence configuring the WoWLAN from shut down callback it self. Remaining steps of disabling SDIO interrupts, setting 'MMC_PM_KEEP_POWER' flag are same as other power states. Signed-off-by: Karun Eagalapati Signed-off-by: Amitkumar Karwar Signed-off-by: Kalle Valo

rsi: sdio: Add WOWLAN support for S4 hibernate state

2017-10-30T10:50:12Z

We are disabling of interrupts from firmware in freeze handler. Also setting power management capability KEEP_MMC_POWER to make device wakeup for WoWLAN trigger. At restore, we observed a device reset on some platforms. Hence reloading of firmware and device initialization is performed. Signed-off-by: Karun Eagalapati Signed-off-by: Amitkumar Karwar Signed-off-by: Kalle Valo