Hosts the 0x221E linux distro kernel. https://universe.0xinfinity.dev/distro/kernel/atom?h=linux-6.2.y 2023-03-10T08:27:59Z 2023-03-10T08:27:59Z Lorenzo Bianconi lorenzo@kernel.org 2022-12-05T16:59:04Z urn:sha1:bf425c5d7ef6fb4083c1e0d46440f886127b5ee5 [ Upstream commit 6e1abc51c945663bddebfa1beb9590ff5b250eb7 ] After 'commit ba45841ca5eb ("wifi: mt76: mt76x02: simplify struct mt76x02_rate_power")', mt76x02 relies on ht[0-7] rate_power data for vht mcs{0,7}, while it uses vth[0-1] rate_power for vht mcs {8,9}. Fix a possible out-of-bound access in mt76x0_phy_get_target_power routine. Fixes: ba45841ca5eb ("wifi: mt76: mt76x02: simplify struct mt76x02_rate_power") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> 2022-12-01T16:29:14Z Lorenzo Bianconi lorenzo@kernel.org 2022-11-22T13:52:08Z urn:sha1:f4cfd3f95f297744e03fd494fcc21f3b65b95658 tx_rate can't be greater than 3 in mt76x0_phy_get_target_power routine for cck rates. Get rid of dead code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2022-12-01T16:29:12Z Felix Fietkau nbd@nbd.name 2022-09-28T09:29:45Z urn:sha1:ba45841ca5eb29245f9c9f452a39586d9d68bc12 - remove stbc, because mt76x0 doesn't support it and mt76x2 uses the same values as HT/VHT - reduce vht array to 2 elements, because VHT MCS0-7 are the same as HT Signed-off-by: Felix Fietkau <nbd@nbd.name> 2022-12-01T16:29:12Z Felix Fietkau nbd@nbd.name 2022-09-28T08:49:11Z urn:sha1:b376d96362d815331dff0c498a338ebe4c8c5bde Its layout and code is mt76x02 specific Signed-off-by: Felix Fietkau <nbd@nbd.name> 2022-03-16T16:40:22Z Lorenzo Bianconi lorenzo@kernel.org 2022-03-14T15:10:25Z urn:sha1:6cb596ba84e307930836e9533a48792095f0dd42 Introduce __mt76u_init unitility routine and move mt7615 usb bus ops into mt7615 module in order to allow specifying driver specific parameter. This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-12-19T14:24:00Z Lorenzo Bianconi lorenzo@kernel.org 2021-11-21T12:12:25Z urn:sha1:633f77b517ac704086c267b70a6dfe1924cfed0b Add SAR spec support to mt76x02 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-10-20T08:37:01Z Richard Huynh voxlympha@gmail.com 2021-09-07T08:58:24Z urn:sha1:d387cde7af84a5100bd717bb7359e9b30d95587d Appears to have incorrectly offset 0x120 + 0x12 instead of 12 decimal, leading to bogus power values being used. Signed-off-by: Richard Huynh <voxlympha@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-10-20T08:36:39Z Felix Fietkau nbd@nbd.name 2021-09-24T15:54:40Z urn:sha1:970be1dff26dc387591688a08e4c21ebd13c3fc2 napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-10-20T08:36:39Z Christophe JAILLET christophe.jaillet@wanadoo.fr 2021-08-22T07:39:45Z urn:sha1:a2e759612e5ff3858856fe97be5245eecb84e29b The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-06-19T07:22:44Z Lorenzo Bianconi lorenzo@kernel.org 2021-05-07T10:26:11Z urn:sha1:47cbf73cf924ce2202332f61e705f4ed9bd6a74e BIT(0) in MT_EE_NIC_CONF_1 is use to notify the driver if the radio RF switch is controlled through a gpio. Use dev_debug instead of dev_err to log this info. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>