kernel/drivers/net/wireless/intel/iwlegacy/common.c, branch linux-6.2.y

wifi: iwlegacy: common: don't call dev_kfree_skb() under spin_lock_irqsave()

2023-03-10T08:28:01Z

[ Upstream commit 0c1528675d7a9787cb516b64d8f6c0f6f8efcb48 ] It is not allowed to call consume_skb() from hardware interrupt context or with interrupts being disabled. So replace dev_kfree_skb() with dev_consume_skb_irq() under spin_lock_irqsave(). Compile tested only. Fixes: 4bc85c1324aa ("Revert "iwlwifi: split the drivers for agn and legacy devices 3945/4965"") Signed-off-by: Yang Yingliang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221207144013.70210-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin

wifi: mac80211: make smps_mode per-link

2022-09-06T08:11:44Z

The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg Signed-off-by: Johannes Berg

wifi: iwlegacy: fix repeated words in comments

2022-07-18T12:08:48Z

Delete the redundant words 'to' and 'if'. Signed-off-by: Jilin Yuan Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220709135316.41425-1-yuanjilin@cdjrlc.com

wifi: mac80211: change QoS settings API to take link into account

2022-07-15T09:43:15Z

Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg

wifi: mac80211: return a beacon for a specific link

2022-06-20T10:57:08Z

Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz Signed-off-by: Johannes Berg

wifi: mac80211: split bss_info_changed method

2022-06-20T10:55:09Z

Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg

wifi: mac80211: move interface config to new struct

2022-06-20T10:55:03Z

We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg

mac80211: prepare sta handling for MLO support

2022-04-11T14:42:03Z

Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg

intel: switch from 'pci_' to 'dma_' API

2021-08-29T11:47:21Z

The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/f55043d0c847bfae60087707778563cf732a7bf9.1629619229.git.christophe.jaillet@wanadoo.fr

iwlegacy: avoid -Wempty-body warning

2021-04-11T09:31:01Z

There are a couple of warnings in this driver when building with W=1: drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_power_set_mode': drivers/net/wireless/intel/iwlegacy/common.c:1195:60: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 1195 | il->chain_noise_data.state); | ^ drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_do_scan_abort': drivers/net/wireless/intel/iwlegacy/common.c:1343:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] Change the empty debug macros to no_printk(), which avoids the warnings and adds useful format string checks. Signed-off-by: Arnd Bergmann Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210322104343.948660-3-arnd@kernel.org