kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c, branch linux-6.2.y

wifi: brcmfmac: add firmware vendor info in driver info

2022-12-08T14:44:07Z

In order to determine the vendor that released a firmware image for a specific device, the device table now sets the vendor identifier in driver info and it is stored in struct brcmf_bus::fwvid during probe. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221129135446.151065-3-arend.vanspriel@broadcom.com

wifi: brcmfmac: pcie/sdio/usb: Get CLM blob via standard firmware mechanism

2022-09-19T09:59:33Z

Now that the firmware fetcher can handle per-board CLM files, load the CLM blob alongside the other firmware files and change the bus API to just return the existing blob, instead of fetching the filename. This enables per-board CLM blobs, which are required on Apple platforms. Acked-by: Linus Walleij Reviewed-by: Arend van Spriel Signed-off-by: Hector Martin Reviewed-by: Alvin Šipraga Signed-off-by: Russell King (Oracle) Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/E1oZDnY-0077aA-8f@rmk-PC.armlinux.org.uk

brcmfmac: properly check for bus register errors

2021-05-13T16:58:42Z

The brcmfmac driver ignores any errors on initialization with the different busses by deferring the initialization to a workqueue and ignoring all possible errors that might happen. Fix up all of this by only allowing the module to load if all bus registering worked properly. Cc: Kalle Valo Link: https://lore.kernel.org/r/20210503115736.2104747-70-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

Revert "brcmfmac: add a check for the status of usb_register"

2021-05-13T16:58:41Z

This reverts commit 42daad3343be4a4e1ee03e30a5f5cc731dadfef5. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change. The original commit here did nothing to actually help if usb_register() failed, so it gives a "false sense of security" when there is none. The correct solution is to correctly unwind from this error. Cc: Kangjie Lu Cc: Kalle Valo Link: https://lore.kernel.org/r/20210503115736.2104747-69-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

net: brcmfmac: Convey execution context via argument to brcmf_netif_rx()

2020-09-29T21:02:55Z

bcrmgf_netif_rx() uses in_interrupt to chose between netif_rx() and netif_rx_ni(). in_interrupt() usage in drivers is phased out. Convey the execution mode via an 'inirq' argument through the various callchains leading to brcmf_netif_rx(): brcmf_pcie_isr_thread() <- Task context brcmf_proto_msgbuf_rx_trigger() brcmf_msgbuf_process_rx() brcmf_msgbuf_process_msgtype() brcmf_msgbuf_process_rx_complete() brcmf_netif_mon_rx() brcmf_netif_rx(isirq = false) brcmf_netif_rx(isirq = false) brcmf_sdio_readframes() <- Task context sdio_claim_host() might sleep brcmf_rx_frame(isirq = false) brcmf_sdio_rxglom() <- Task context sdio_claim_host() might sleep brcmf_rx_frame(isirq = false) brcmf_usb_rx_complete() <- Interrupt context brcmf_rx_frame(isirq = true) brcmf_rx_frame() brcmf_proto_rxreorder() brcmf_proto_bcdc_rxreorder() brcmf_fws_rxreorder() brcmf_netif_rx() brcmf_netif_rx() Signed-off-by: Thomas Gleixner Cc: Arend van Spriel Cc: Kalle Valo Signed-off-by: David S. Miller

brcmfmac: check return value of driver_for_each_device()

2020-09-24T15:47:55Z

Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1576:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] 1576 | int ret; | ^~~ driver_for_each_device() has been declared with __must_check, so the return value should be checked. Signed-off-by: Zhang Changzhong Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1600481191-14250-1-git-send-email-zhangchangzhong@huawei.com

brcmfmac: add USB autosuspend feature support

2020-03-26T09:44:18Z

We add enable dynamic suspend (autosuspend) support in host driver, and it can let platform cut down idle power consumption. To support autosuspend feature in host driver, kernel need to be built with CONFIG_USB_SUSPEND and autosuspend need to be turn on. And we also replace wowl feature with adding "needs_remote_wakeup", so that host still can be waken by wireless device. Signed-off-by: Wright Feng Signed-off-by: Chi-Hsien Lin Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1585124429-97371-6-git-send-email-chi-hsien.lin@cypress.com

brcmfmac: Fix driver crash on USB control transfer timeout

2020-03-26T09:43:45Z

When the control transfer gets timed out, the error status was returned without killing that urb, this leads to using the same urb. This issue causes the kernel crash as the same urb is sumbitted multiple times. The fix is to kill the urb for timeout transfer before returning error Signed-off-by: Raveendran Somu Signed-off-by: Chi-hsien Lin Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1585124429-97371-2-git-send-email-chi-hsien.lin@cypress.com

brcmfmac: Fix memory leak in brcmf_usbdev_qinit

2019-12-18T19:08:29Z

In the implementation of brcmf_usbdev_qinit() the allocated memory for reqs is leaking if usb_alloc_urb() fails. Release reqs in the error handling path. Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Signed-off-by: Navid Emamdoost Signed-off-by: Kalle Valo

brcmfmac: fix interface sanity check

2019-12-18T19:06:03Z

Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Cc: stable # 3.4 Cc: Arend van Spriel Signed-off-by: Johan Hovold Signed-off-by: Kalle Valo