kernel/drivers/net/wireless/ath/ath9k/dynack.c, branch linux-6.2.y

ath9k: work around false-positive gcc warning

2020-11-10T18:12:42Z

gcc-10 shows a false-positive warning with CONFIG_KASAN: drivers/net/wireless/ath/ath9k/dynack.c: In function 'ath_dynack_sample_tx_ts': include/linux/etherdevice.h:290:14: warning: writing 4 bytes into a region of size 0 [-Wstringop-overflow=] 290 | *(u32 *)dst = *(const u32 *)src; | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~ Until gcc is fixed, work around this by using memcpy() in place of ether_addr_copy(). Hopefully gcc-11 will not have this problem. Link: https://godbolt.org/z/sab1MK Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97490 Signed-off-by: Arnd Bergmann [kvalo@codeaurora.org: remove ifdef and add a comment] Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20201026213040.3889546-8-arnd@kernel.org

ath9k: dynack: Demote non-compliant function header

2020-11-07T08:07:54Z

Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'old' not described in 'ath_dynack_ewma' drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'new' not described in 'ath_dynack_ewma' Cc: QCA ath9k Development Cc: Kalle Valo Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Lorenzo Bianconi Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20201102112410.1049272-40-lee.jones@linaro.org

ath9k: dynack: set ackto to max timeout in ath_dynack_reset

2019-09-04T06:15:31Z

Initialize acktimeout to the maximum configurable value in ath_dynack_reset in order to not disconnect long distance static links enabling dynack and even to take care of possible errors configuring a static timeout. Moreover initialize station timeout value to the current acktimeout value Tested-by: Koen Vandeputte Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo

ath9k: dynack: set max timeout according to channel width

2019-09-04T06:15:21Z

Compute maximum configurable ackimeout/ctstimeout according to channel width (clockrate) Tested-by: Koen Vandeputte Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo

ath9k: dynack: properly set last timeout timestamp in ath_dynack_reset

2019-09-04T06:15:10Z

Add compute timeout to last computation timestamp in ath_dynack_reset in order to not run ath_dynack_compute_ackto immediately Tested-by: Koen Vandeputte Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo

ath9k: dyanck: introduce ath_dynack_set_timeout routine

2019-09-04T06:15:00Z

Introduce ath_dynack_set_timeout routine to configure slottime/ack/cts timeouts and remove duplicated code Tested-by: Koen Vandeputte Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo

ath9k: dynack: fix possible deadlock in ath_dynack_node_{de}init

2019-09-04T06:13:41Z

Fix following lockdep warning disabling bh in ath_dynack_node_init/ath_dynack_node_deinit [ 75.955878] -------------------------------- [ 75.955880] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 75.955884] swapper/0/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 75.955888] 00000000792a7ee0 (&(&da->qlock)->rlock){+.?.}, at: ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.955905] {SOFTIRQ-ON-W} state was registered at: [ 75.955912] lock_acquire+0x9a/0x160 [ 75.955917] _raw_spin_lock+0x2c/0x70 [ 75.955927] ath_dynack_node_init+0x2a/0x60 [ath9k_hw] [ 75.955934] ath9k_sta_state+0xec/0x160 [ath9k] [ 75.955976] drv_sta_state+0xb2/0x740 [mac80211] [ 75.956008] sta_info_insert_finish+0x21a/0x420 [mac80211] [ 75.956039] sta_info_insert_rcu+0x12b/0x2c0 [mac80211] [ 75.956069] sta_info_insert+0x7/0x70 [mac80211] [ 75.956093] ieee80211_prep_connection+0x42e/0x730 [mac80211] [ 75.956120] ieee80211_mgd_auth.cold+0xb9/0x15c [mac80211] [ 75.956152] cfg80211_mlme_auth+0x143/0x350 [cfg80211] [ 75.956169] nl80211_authenticate+0x25e/0x2b0 [cfg80211] [ 75.956172] genl_family_rcv_msg+0x198/0x400 [ 75.956174] genl_rcv_msg+0x42/0x90 [ 75.956176] netlink_rcv_skb+0x35/0xf0 [ 75.956178] genl_rcv+0x1f/0x30 [ 75.956180] netlink_unicast+0x154/0x200 [ 75.956182] netlink_sendmsg+0x1bf/0x3d0 [ 75.956186] ___sys_sendmsg+0x2c2/0x2f0 [ 75.956187] __sys_sendmsg+0x44/0x80 [ 75.956190] do_syscall_64+0x55/0x1a0 [ 75.956192] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 75.956194] irq event stamp: 2357092 [ 75.956196] hardirqs last enabled at (2357092): [] _raw_spin_unlock_irqrestore+0x3e/0x50 [ 75.956199] hardirqs last disabled at (2357091): [] _raw_spin_lock_irqsave+0x11/0x80 [ 75.956202] softirqs last enabled at (2357072): [] irq_enter+0x59/0x60 [ 75.956204] softirqs last disabled at (2357073): [] irq_exit+0xae/0xc0 [ 75.956206] other info that might help us debug this: [ 75.956207] Possible unsafe locking scenario: [ 75.956208] CPU0 [ 75.956209] ---- [ 75.956210] lock(&(&da->qlock)->rlock); [ 75.956213] [ 75.956214] lock(&(&da->qlock)->rlock); [ 75.956216] *** DEADLOCK *** [ 75.956217] 1 lock held by swapper/0/0: [ 75.956219] #0: 000000003bb5675c (&(&sc->sc_pcu_lock)->rlock){+.-.}, at: ath9k_tasklet+0x55/0x240 [ath9k] [ 75.956225] stack backtrace: [ 75.956228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1-wdn+ #13 [ 75.956229] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009 [ 75.956231] Call Trace: [ 75.956233] [ 75.956236] dump_stack+0x67/0x90 [ 75.956239] mark_lock+0x4c1/0x640 [ 75.956242] ? check_usage_backwards+0x130/0x130 [ 75.956245] ? sched_clock_local+0x12/0x80 [ 75.956247] __lock_acquire+0x484/0x7a0 [ 75.956250] ? __lock_acquire+0x3b9/0x7a0 [ 75.956252] lock_acquire+0x9a/0x160 [ 75.956259] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956262] _raw_spin_lock_bh+0x34/0x80 [ 75.956268] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956275] ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956280] ath_rx_tasklet+0xd09/0xe90 [ath9k] [ 75.956286] ath9k_tasklet+0x102/0x240 [ath9k] [ 75.956288] tasklet_action_common.isra.0+0x6d/0x170 [ 75.956291] __do_softirq+0xcc/0x425 [ 75.956294] irq_exit+0xae/0xc0 [ 75.956296] do_IRQ+0x8a/0x110 [ 75.956298] common_interrupt+0xf/0xf [ 75.956300] [ 75.956303] RIP: 0010:cpuidle_enter_state+0xb2/0x400 [ 75.956308] RSP: 0018:ffffffff82203e70 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd7 [ 75.956310] RAX: ffffffff82219800 RBX: ffffffff822bd0a0 RCX: 0000000000000000 [ 75.956312] RDX: 0000000000000046 RSI: 0000000000000006 RDI: ffffffff82219800 [ 75.956314] RBP: ffff888155a01c00 R08: 00000011af51aabe R09: 0000000000000000 [ 75.956315] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 75.956317] R13: 00000011af51aabe R14: 0000000000000003 R15: ffffffff82219800 [ 75.956321] cpuidle_enter+0x24/0x40 [ 75.956323] do_idle+0x1ac/0x220 [ 75.956326] cpu_startup_entry+0x14/0x20 [ 75.956329] start_kernel+0x482/0x489 [ 75.956332] secondary_startup_64+0xa4/0xb0 Fixes: c774d57fd47c ("ath9k: add dynamic ACK timeout estimation") Signed-off-by: Lorenzo Bianconi Tested-by: Koen Vandeputte Signed-off-by: Kalle Valo

ath9k: dynack: make ewma estimation faster

2018-11-06T16:26:50Z

In order to make propagation time estimation faster, use current sample as ewma output value during 'late ack' tracking Tested-by: Koen Vandeputte Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo

ath9k: dynack: check da->enabled first in sampling routines

2018-11-06T16:26:39Z

Check da->enabled flag first in ath_dynack_sample_tx_ts and ath_dynack_sample_ack_ts routines in order to avoid useless processing Tested-by: Koen Vandeputte Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo

ath9k: dynack: move debug log after buffer increments

2018-11-06T16:26:28Z

Move debug log in ath_dynack_sample_tx_ts and ath_dynack_sample_ack_ts after timestamp buffer head/tail increments in order to make debugging more user friendly Tested-by: Koen Vandeputte Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo