kernel/drivers/net/wireless/ath/ath6kl, branch linux-rolling-stable

wifi: ath6kl: Fix spellings

2025-06-27T14:42:45Z

Fix misspelling reported by codespell. Signed-off-by: Sumanth Gavini Link: https://patch.msgid.link/20250522205701.393612-1-sumanth.gavini@yahoo.com Signed-off-by: Jeff Johnson

wifi: cfg80211/mac80211: Add support to get radio index

2025-06-24T13:19:27Z

Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg

wifi: ath6kl: remove WARN on bad firmware input

2025-06-18T07:04:56Z

If the firmware gives bad input, that's nothing to do with the driver's stack at this point etc., so the WARN_ON() doesn't add any value. Additionally, this is one of the top syzbot reports now. Just print a message, and as an added bonus, print the sizes too. Reported-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com Tested-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com Acked-by: Jeff Johnson Link: https://patch.msgid.link/20250617114529.031a677a348e.I58bf1eb4ac16a82c546725ff010f3f0d2b0cca49@changeid Signed-off-by: Johannes Berg

treewide, timers: Rename from_timer() to timer_container_of()

2025-06-08T07:07:37Z

Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com

treewide: Switch/rename to timer_delete[_sync]()

2025-04-05T08:30:12Z

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar

wifi: cfg80211: send MLO links tx power info in GET_INTERFACE

2024-12-04T15:14:46Z

Currently, TX power is reported on interface/wdev level as part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links can be part of an interface/wdev and hence its necessary to report the TX power of each link. Add support to send tx power for all valid links of an MLD as part of NL80211_CMD_GET_INTERFACE request. As far as userspace is concerned, there is no behavioral change for Non-ML Interfaces. For ML interfaces, userspace should fetch TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched. Co-developed-by: Aaradhana Sahu Signed-off-by: Aaradhana Sahu Signed-off-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com Signed-off-by: Johannes Berg

Merge tag 'ath-next-20241030' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath

2024-10-31T14:03:57Z

ath.git patches for v6.13 This development cycle featured phase 1 of patches to ath12k to support the new 802.11be MLO feature, along with other ath12k feature patches. In older drivers, support for some additional devices were added. And there was the usual set of bug fixes and cleanups across most drivers. Per-driver highlights: ath12k * Switch to using wiphy_lock() and remove ar->conf_mutex * Convert struct ath12k_sta::update_wk to use struct wiphy_work * Add phase 1 of 802.11be MLO support * Add firmware coredump collection support * Add debugfs support for a multitude of statistics * Fix host representation of multiple hal_rx structs * Fix use-after-free in ath12k_dp_cc_cleanup() * Skip Rx TID cleanup for self peer * Fix warning and crash when unloading in a VM * Convert CE interrupt handling from tasklet to BH workqueue * Fix A-MSDU indication in monitor mode ath11k * Fix double free issue during SRNG deinit * Enable firmware diagnostic events for WCN6750 * Fix CE offset address calculation for WCN6750 during SSR * Fix stack frame size warning in ath11k_vif_wow_set_wakeups() * Document the inputs for ath11k on WCN6855 ath10k * Fix multiple stack frame size warnings * Fix invalid VHT parameters in supported_vht_mcs_rate_nss* structs * Avoid NULL pointer error during SDIO remove ath5k * Add support for Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23Z

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

wifi: ath6kl: fix typos in struct wmi_rssi_threshold_params_cmd and wmi_snr_threshold_params_cmd comments

2024-09-19T16:18:45Z

Fix typos in comments. Reported-by: Matthew Wilcox Signed-off-by: Andrew Kreimer Acked-by: Jeff Johnson Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20240913094818.14456-1-algonell@gmail.com

tracing/treewide: Remove second parameter of __assign_str()

2024-05-23T00:14:47Z

With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/$__assign_str([^,]*[^ ,]$ *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Linus Torvalds Cc: Julia Lawall Signed-off-by: Steven Rostedt (Google) Acked-by: Jani Nikula Acked-by: Christian König for the amdgpu parts. Acked-by: Thomas Hellström #for Acked-by: Rafael J. Wysocki # for thermal Acked-by: Takashi Iwai Acked-by: Darrick J. Wong # xfs Tested-by: Guenter Roeck