kernel/drivers/net/wireless/ath/ath11k/debug.h, branch linux-6.9.y

wifi: ath11k: Update Qualcomm Innovation Center, Inc. copyrights

2023-11-30T16:59:24Z

Update the copyright for all ath11k files modified on behalf of Qualcomm Innovation Center, Inc. in 2021 through 2023. Signed-off-by: Jeff Johnson Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-2-be0b7408cbac@quicinc.com

wifi: ath11k: debug: add ATH11K_DBG_CE

2023-06-13T09:10:46Z

Add a new debug level for CE so that we don't need to use AHB level in ce.c. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230609142440.24643-16-kvalo@kernel.org

wifi: ath11k: debug: use all upper case in ATH11k_DBG_HAL

2023-06-13T09:10:45Z

Somehow the character 'k' in ATH11k_DBG_HAL was in lower case. Change it to upper case. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230609142440.24643-12-kvalo@kernel.org

wifi: ath11k: print debug level in debug messages

2023-06-13T09:10:42Z

To make it easier understand the context of a debug message print the debug level before the actual message. An example: [21867.231900] ath11k_pci 0000:06:00.0: wmi processed regulatory ext channel list The tracepoint call is not modified, it's better to userspace print the debug level if needed. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230609142440.24643-3-kvalo@kernel.org

wifi: ath11k: debug: remove unused ATH11K_DBG_ANY

2023-06-13T09:10:41Z

It's not used anywhere so can be easily removed. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230609142440.24643-2-kvalo@kernel.org

wifi: ath11k: factory test mode support

2023-06-01T10:30:49Z

Add support to process factory test mode commands (FTM) for calibration. By default firmware start with NORMAL mode and to process the FTM commands firmware needs to be restarted in FTM mode using module parameter ftm_mode. The pre-request is all the radios should be down before starting the test. When start command ATH11K_TM_CMD_TESTMODE_START is received, ar->state is set to Test Mode. If the FTM command or event length is greater than 256 bytes, it will be broken down into multiple segments and encoded with TLV header if it is segmented commands, else it is sent to firmware as it is. On receiving UTF event from firmware, if it is segmented event, the driver will wait until it receives all the segments and notify the complete data to user application. In case the segmented sequence are missed or lost from the firmware, driver will skip the already received partial data. In case of unsegmented UTF event from firmware, driver notifies the data to the user application as it comes. Applications handles the data further. Command to boot in ftm mode: insmod ath11k ftm_mode=1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Govindaraj Saminathan Co-developed-by: Sowmiya Sree Elavalagan Signed-off-by: Sowmiya Sree Elavalagan Signed-off-by: Raj Kumar Bhagat Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230517135934.16408-4-quic_rajkbhag@quicinc.com

ath11k: Fix incorrect debug_mask mappings

2022-06-06T14:08:44Z

Currently a couple of debug_mask entries are mapped to the same value, this could enable unintended driver logging. If enabling DP_TX logs was the intention, then this could also enable PCI logs flooding the dmesg buffer or vice versa. Fix this by correctly assigning the debug masks. Found during code review. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: aa2092a9bab3f ("ath11k: add raw mode and software crypto support") Signed-off-by: Manikanta Pubbisetty Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220602115621.15339-1-quic_mpubbise@quicinc.com

ath11k: add trace log support

2021-11-17T07:29:34Z

This change is to add trace log support for, * WMI events * WMI commands * ath11k_dbg messages * ath11k_dbg_dump messages * ath11k_log_info messages * ath11k_log_warn messages * ath11k_log_err messages Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00652-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1636439755-30419-1-git-send-email-quic_vnaralas@quicinc.com

ath11k: refactor debugfs code into debugfs.c

2020-09-22T07:41:41Z

If CONFIG_ATH11K_DEBUGFS is disabled there are warnings debug.c: drivers/net/wireless/ath/ath11k/debug.c:36:20: warning: 'htt_bp_lmac_ring' defined but not used [-Wunused-variable] 36 | static const char *htt_bp_lmac_ring[HTT_SW_LMAC_RING_IDX_MAX] = { | ^~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath11k/debug.c:15:20: warning: 'htt_bp_umac_ring' defined but not used [-Wunused-variable] 15 | static const char *htt_bp_umac_ring[HTT_SW_UMAC_RING_IDX_MAX] = { | ^~~~~~~~~~~~~~~~ Fix this by refactoring debugfs code to debugfs.c. This also reduces the number of ifdefs in debug.c and makes it easier to maintain the code. No functional changes. Compile tested only. Reported-by: YueHaibing Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1600264523-12939-1-git-send-email-kvalo@codeaurora.org

ath11k: add raw mode and software crypto support

2020-09-11T09:56:50Z

Adding raw mode tx/rx support. Also, adding support for software crypto which depends on raw mode. To enable raw mode tx/rx: insmod ath11k.ko frame_mode=0 To enable software crypto: insmod ath11k.ko crypto_mode=1 These modes could be helpful in debugging crypto related issues. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty Signed-off-by: Venkateswara Naralasetty Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/010101746c6a52d9-18302a2c-0d6d-4057-aa4b-95960c809646-000000@us-west-2.amazonses.com