kernel/drivers/net/wireless/ath/ath11k/debug.h, branch linux-6.2.y

ath11k: Fix incorrect debug_mask mappings

2022-06-06T14:08:44Z

Currently a couple of debug_mask entries are mapped to the same value, this could enable unintended driver logging. If enabling DP_TX logs was the intention, then this could also enable PCI logs flooding the dmesg buffer or vice versa. Fix this by correctly assigning the debug masks. Found during code review. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: aa2092a9bab3f ("ath11k: add raw mode and software crypto support") Signed-off-by: Manikanta Pubbisetty Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220602115621.15339-1-quic_mpubbise@quicinc.com

ath11k: add trace log support

2021-11-17T07:29:34Z

This change is to add trace log support for, * WMI events * WMI commands * ath11k_dbg messages * ath11k_dbg_dump messages * ath11k_log_info messages * ath11k_log_warn messages * ath11k_log_err messages Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00652-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1636439755-30419-1-git-send-email-quic_vnaralas@quicinc.com

ath11k: refactor debugfs code into debugfs.c

2020-09-22T07:41:41Z

If CONFIG_ATH11K_DEBUGFS is disabled there are warnings debug.c: drivers/net/wireless/ath/ath11k/debug.c:36:20: warning: 'htt_bp_lmac_ring' defined but not used [-Wunused-variable] 36 | static const char *htt_bp_lmac_ring[HTT_SW_LMAC_RING_IDX_MAX] = { | ^~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath11k/debug.c:15:20: warning: 'htt_bp_umac_ring' defined but not used [-Wunused-variable] 15 | static const char *htt_bp_umac_ring[HTT_SW_UMAC_RING_IDX_MAX] = { | ^~~~~~~~~~~~~~~~ Fix this by refactoring debugfs code to debugfs.c. This also reduces the number of ifdefs in debug.c and makes it easier to maintain the code. No functional changes. Compile tested only. Reported-by: YueHaibing Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1600264523-12939-1-git-send-email-kvalo@codeaurora.org

ath11k: add raw mode and software crypto support

2020-09-11T09:56:50Z

Adding raw mode tx/rx support. Also, adding support for software crypto which depends on raw mode. To enable raw mode tx/rx: insmod ath11k.ko frame_mode=0 To enable software crypto: insmod ath11k.ko crypto_mode=1 These modes could be helpful in debugging crypto related issues. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty Signed-off-by: Venkateswara Naralasetty Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/010101746c6a52d9-18302a2c-0d6d-4057-aa4b-95960c809646-000000@us-west-2.amazonses.com

ath11k: pci: add MSI config initialisation

2020-08-17T10:07:06Z

QCA6390 uses PCI MSI for CE/MHI/DP interrupt. Add MSI vector mapping and MSI enable/disable operations. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1597309466-19688-7-git-send-email-kvalo@codeaurora.org

ath11k: Replace zero-length array with flexible-array

2020-05-06T06:23:08Z

The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200504201224.GA32282@embeddedor

ath11k: Add support to reset htt peer stats

2020-05-06T06:15:30Z

This patch add supports to reset the per peer htt stats. Usage: echo 1 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations//htt_peer_stats_reset While doing so, sync the wmi services between FW and host. Signed-off-by: Ashok Raj Nagarajan Signed-off-by: Tamizh Chelvam Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1588610147-20231-1-git-send-email-tamizhr@codeaurora.org

ath11k: Fix rx_filter flags setting for per peer rx_stats

2020-04-15T08:00:29Z

Rx_filter flags are set with default filter flags during wifi up/down sequence even though the 'ext_rx_stats' debugfs is enabled as 1. So, that we are not getting proper per peer rx_stats. Hence, fixing this by setting the missing rx_filter when ext_rx_stats is already set/enabled. Signed-off-by: Maharaja Kennadyrajan Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1586538405-16226-3-git-send-email-mkenna@codeaurora.org

ath11k: Add sta debugfs support to configure ADDBA and DELBA

2020-04-06T16:13:37Z

Add support to test aggregation procedures (addba/addba_resp/delba) manually by adding the required callbacks in sta debugfs files. To enable automatic aggregation in target, echo 0 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/aggr_mode For manual mode, echo 1 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/aggr_mode To send addba response, echo 0 25 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/addba_resp To send addba, echo 1 32 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/addba To send delba, echo 0 1 37 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/delba Signed-off-by: Maharaja Kennadyrajan Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1585213026-28406-1-git-send-email-mkenna@codeaurora.org

ath11k: Supporting RX ring backpressure HTT event and stats handling

2020-03-18T11:43:54Z

The Firmware sends HTT event to host whenever there is a backpressure on RX rings, Handling such event and dumping info on the console under the "ATH11K_DBG_DP_HTT" debug level. Fetching RX ring backpressure histogram from FW via htt_stats debugfs. #echo "24" > /sys/kernel/debug/ath11k/ipq8074/macX/htt_stats_type #cat /sys/kernel/debug/ath11k/ipq8074/macX/htt_stats Signed-off-by: Vikas Patel Signed-off-by: Sriram R Signed-off-by: Kalle Valo