Hosts the 0x221E linux distro kernel. https://universe.0xinfinity.dev/distro/kernel/atom?h=linux-rolling-lts 2026-03-19T15:08:42Z 2026-03-19T15:08:42Z Laurent Vivier lvivier@redhat.com 2026-03-04T13:43:38Z urn:sha1:950bda065b05e6001f71c0a698a638095bedf702 commit 55f854dd5bdd8e19b936a00ef1f8d776ac32c7b0 upstream. Commit c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu") capped net->max_mtu to the device's hard_mtu in usbnet_probe(). While this correctly prevents oversized packets on standard USB network devices, it breaks the qmi_wwan driver. qmi_wwan relies on userspace (e.g. ModemManager) setting a large MTU on the wwan0 interface to configure rx_urb_size via usbnet_change_mtu(). QMI modems negotiate USB transfer sizes of 16,383 or 32,767 bytes, and the USB receive buffers must be sized accordingly. With max_mtu capped to hard_mtu (~1500 bytes), userspace can no longer raise the MTU, the receive buffers remain small, and download speeds drop from >300 Mbps to ~0.8 Mbps. Introduce a FLAG_NOMAXMTU driver flag that allows individual usbnet drivers to opt out of the max_mtu cap. Set this flag in qmi_wwan's driver_info structures to restore the previous behavior for QMI devices, while keeping the safety fix in place for all other usbnet drivers. Fixes: c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/CAPh3n803k8JcBPV5qEzUB-oKzWkAs-D5CU7z=Vd_nLRCr5ZqQg@mail.gmail.com/ Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Tested-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://patch.msgid.link/20260304134338.1785002-1-lvivier@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2025-11-04T01:36:49Z Qendrim Maxhuni qendrim.maxhuni@garderos.com 2025-10-29T07:57:44Z urn:sha1:e120f46768d98151ece8756ebd688b0e43dc8b29 Raw IP packets have no MAC header, leaving skb->mac_header uninitialized. This can trigger kernel panics on ARM64 when xfrm or other subsystems access the offset due to strict alignment checks. Initialize the MAC header to prevent such crashes. This can trigger kernel panics on ARM when running IPsec over the qmimux0 interface. Example trace: Internal error: Oops: 000000009600004f [#1] SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1 Hardware name: LS1028A RDB Board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xfrm_input+0xde8/0x1318 lr : xfrm_input+0x61c/0x1318 sp : ffff800080003b20 Call trace: xfrm_input+0xde8/0x1318 xfrm6_rcv+0x38/0x44 xfrm6_esp_rcv+0x48/0xa8 ip6_protocol_deliver_rcu+0x94/0x4b0 ip6_input_finish+0x44/0x70 ip6_input+0x44/0xc0 ipv6_rcv+0x6c/0x114 __netif_receive_skb_one_core+0x5c/0x8c __netif_receive_skb+0x18/0x60 process_backlog+0x78/0x17c __napi_poll+0x38/0x180 net_rx_action+0x168/0x2f0 Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Signed-off-by: Qendrim Maxhuni <qendrim.maxhuni@garderos.com> Link: https://patch.msgid.link/20251029075744.105113-1-qendrim.maxhuni@garderos.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2025-08-27T00:08:42Z Fabio Porcedda fabio.porcedda@gmail.com 2025-08-22T09:13:24Z urn:sha1:e81a7f65288c7e2cfb7e7890f648e099fd885ab3 Add the following Telit Cinterion LE910C4-WWX new compositions: 0x1034: tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1034 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1037: tty (diag) + tty (Telit custom) + tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1037 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1038: tty (Telit custom) + tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1038 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250822091324.39558-1-Fabio.Porcedda@telit.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2025-08-12T03:07:16Z Fabio Porcedda fabio.porcedda@gmail.com 2025-08-08T13:31:08Z urn:sha1:61aaca8b89fb98be58b8df19f01181bb983cccff Add the following Telit Cinterion FN990A w/audio composition: 0x1077: tty (diag) + adb + rmnet + audio + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1077 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=67e04c35 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio I: If#= 4 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=03(O) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 5 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=84(I) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2025-06-21T14:34:07Z Xiaowei Li xiaowei.li@simcom.com 2025-06-20T02:27:02Z urn:sha1:0b39b055b5b48cbbdf5746a1ca6e3f6b0221e537 Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip. 0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9071 Rev= 5.15 S: Manufacturer=SIMCOM S: Product=SDXBAAGHA-IDP _SN:D744C4C5 S: SerialNumber=0123456789ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=none E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/tencent_21D781FAA4969FEACA6ABB460362B52C9409@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2025-03-01T01:54:59Z Fabio Porcedda fabio.porcedda@gmail.com 2025-02-27T11:24:40Z urn:sha1:5728b289abbb4e1faf7b5eb264624f08442861f4 The correct name for FE990 is FE990A so use it in order to avoid confusion with FE990B. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250227112441.3653819-3-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2025-03-01T01:54:57Z Fabio Porcedda fabio.porcedda@gmail.com 2025-02-27T11:24:39Z urn:sha1:e8cdd91926aac2c53a23925c538ad4c44be4201f Add the following Telit Cinterion FE990B composition: 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250227112441.3653819-2-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2025-02-08T00:12:06Z Fabio Porcedda fabio.porcedda@gmail.com 2025-02-05T17:16:48Z urn:sha1:ad1664fb699006f552dceeba331ef1e8874309a8 The correct name for FN990 is FN990A so use it in order to avoid confusion with FN990B. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250205171649.618162-5-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2025-02-08T00:12:06Z Fabio Porcedda fabio.porcedda@gmail.com 2025-02-05T17:16:46Z urn:sha1:9dba9a45f8ca64a7df32aada14c20a3153af1ac8 Add the following Telit Cinterion FN990B composition: 0x10d0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250205171649.618162-3-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2024-12-19T01:24:03Z Martin Hou martin.hou@foxmail.com 2024-12-16T03:06:18Z urn:sha1:5c964c8a97c12145104f5d2782aa1ffccf3a93dd Add support for Quectel RG255C which is based on Qualcomm SDX35 chip. The composition is DM / NMEA / AT / QMI. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0316 Rev= 5.15 S: Manufacturer=Quectel S: Product=RG255C-CN S: SerialNumber=c68192c1 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Martin Hou <martin.hou@foxmail.com> Link: https://patch.msgid.link/tencent_17DDD787B48E8A5AB8379ED69E23A0CD9309@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>