kernel/drivers/net/usb/cdc_subset.c, branch linux-4.3.y

cdc_subset: deal with a device that needs reset for timeout

2014-08-02T22:44:18Z

This device needs to be reset to recover from a timeout. Unfortunately this can be handled only at the level of the subdrivers. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller

Revert "cdc_subset: deal with a device that needs reset for timeout"

2014-07-30T15:56:23Z

This reverts commit 20fbe3ae990fd54fc7d1f889d61958bc8b38f254. As reported by Stephen Rothwell, it causes compile failures in certain configurations: drivers/net/usb/cdc_subset.c:360:15: error: 'dummy_prereset' undeclared here (not in a function) .pre_reset = dummy_prereset, ^ drivers/net/usb/cdc_subset.c:361:16: error: 'dummy_postreset' undeclared here (not in a function) .post_reset = dummy_postreset, ^ Reported-by: Stephen Rothwell Acked-by: David Miller Cc: Oliver Neukum Signed-off-by: Linus Torvalds

cdc_subset: deal with a device that needs reset for timeout

2014-07-29T19:22:15Z

This device needs to be reset to recover from a timeout. Unfortunately this can be handled only at the level of the subdrivers. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller

drivers/net: delete non-required instances of include

2014-01-16T19:53:26Z

None of these files are actually using any __init type directives and hence don't need to include . Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller

usb: Fix FSF address in file headers

2013-12-06T17:37:55Z

Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL so that we do not have to keep updating the header comments anytime the address changes. CC: Oliver Neukum CC: Steve Glendinning CC: Oliver Neukum Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller

USB: Disable hub-initiated LPM for comms devices.

2012-05-18T22:42:55Z

Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Cc: Hansjoerg Lipp Cc: Tilman Schmidt Cc: Karsten Keil Cc: Peter Korsgaard Cc: Jan Dumon Cc: Petko Manolov Cc: Steve Glendinning Cc: "John W. Linville" Cc: Kalle Valo Cc: "Luis R. Rodriguez" Cc: Jouni Malinen Cc: Vasanthakumar Thiagarajan Cc: Senthil Balasubramanian Cc: Christian Lamparter Cc: Brett Rudley Cc: Roland Vossen Cc: Arend van Spriel Cc: "Franky (Zhenhui) Lin" Cc: Kan Yan Cc: Dan Williams Cc: Jussi Kivilinna Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: Herton Ronaldo Krzesinski Cc: Hin-Tak Leung Cc: Larry Finger Cc: Chaoming Li Cc: Daniel Drake Cc: Ulrich Kunitz Signed-off-by: Sarah Sharp

USB: convert drivers/net/* to use module_usb_driver()

2011-11-18T17:44:20Z

This converts the drivers in drivers/net/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Wolfgang Grandegger Cc: Samuel Ortiz Cc: Oliver Neukum Cc: Peter Korsgaard Cc: Petko Manolov Cc: Steve Glendinning Cc: Christian Lamparter Cc: "John W. Linville" Cc: Dan Williams Cc: Jussi Kivilinna Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: Herton Ronaldo Krzesinski Cc: Hin-Tak Leung Cc: Larry Finger Cc: Chaoming Li Cc: Lucas De Marchi Cc: "David S. Miller" Cc: Roel Kluin Cc: Paul Gortmaker Cc: Jiri Pirko Cc: Pavel Roskin Cc: Yoann DI-RUZZA Cc: George Signed-off-by: Greg Kroah-Hartman

usbnet: use eth%d name for known ethernet devices

2011-04-02T03:12:02Z

The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann Tested-by: Andy Green Signed-off-by: David S. Miller

usbnet cdc_subset: fix issues talking to PXA gadgets

2009-06-20T08:21:53Z

The host-side CDC subset driver is binding more specifically than it should ... only to PXA 210/25x/26x Linux-USB gadgets. Loosen that restriction to match the gadget driver driver. This will various PXA 27x and PXA 3xx devices happier when talking to Linux hosts, potentially others. Signed-off-by: David Brownell Tested-by: Aric D. Blumer Signed-off-by: David S. Miller

USB: build fix

2008-05-20T21:14:15Z

this config: http://redhat.com/~mingo/misc/config-Wed_Apr_30_15_12_48_CEST_2008.bad fails to build due to an #error. Turn that into a #warning instead to not break randconfig builds unnecessarily. Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman