kernel/drivers/net/usb/cdc_ether.c, branch linux-5.1.y

net: usb: aqc111: Extend HWID table by QNAP device

2019-03-26T18:19:42Z

New device of QNAP based on aqc111u Add this ID to blacklist of cdc_ether driver as well Signed-off-by: Dmitry Bezrukov Signed-off-by: David S. Miller

net: usb: aqc111: Extend HWID table by TRENDnet device

2019-01-16T21:32:42Z

New device of TRENDnet based on aqc111u Add this ID to blacklist of cdc_ether driver as well Signed-off-by: Dmitry Bezrukov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller

cdc_ether: trivial whitespace readability fix

2019-01-07T16:33:18Z

This function is unreadable enough without indenting mismatches and unnecessary line breaks. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

net: usb: aqc111: Extend cdc_ether blacklist

2018-11-27T23:46:07Z

Added Aquantia and ASIX device IDs to prevent loading cdc_ether for these devices. Our firmware reports CDC configuration simultaneously with vendor specific. Signed-off-by: Dmitry Bezrukov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller

cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN

2018-04-11T14:36:38Z

The Cinterion AHS8 is a 3G device with one embedded WWAN interface using cdc_ether as a driver. The modem is controlled via AT commands through the exposed TTYs. AT+CGDCONT write command can be used to activate or deactivate a WWAN connection for a PDP context defined with the same command. UE supports one WWAN adapter. Signed-off-by: Bassem Boubaker Acked-by: Oliver Neukum Signed-off-by: David S. Miller

cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWAN

2018-02-27T19:44:36Z

The Cinterion PL8 is an LTE modem with 2 possible WWAN interfaces. The modem is controlled via AT commands through the exposed TTYs. AT^SWWAN write command can be used to activate or deactivate a WWAN connection for a PDP context defined with AT+CGDCONT. UE supports two WWAN adapter. Both WWAN adapters can be activated a the same time Signed-off-by: Bassem Boubaker Acked-by: Oliver Neukum Signed-off-by: David S. Miller

net: cdc_ether: fix divide by 0 on bad descriptors

2017-11-08T04:42:01Z

Setting dev->hard_mtu to 0 will cause a divide error in usbnet_probe. Protect against devices with bogus CDC Ethernet functional descriptors by ignoring a zero wMaxSegmentSize. Signed-off-by: Bjørn Mork Acked-by: Oliver Neukum Signed-off-by: David S. Miller

cdc_ether: flag the Huawei ME906/ME909 as WWAN

2017-10-24T09:32:54Z

The Huawei ME906 (12d1:15c1) comes with a standard ECM interface that requires management via AT commands sent over one of the control TTYs (e.g. connected with AT^NDISDUP). Signed-off-by: Aleksander Morgado Signed-off-by: David S. Miller

drivers/net/usb: add device id for TP-LINK UE300 USB 3.0 Ethernet

2017-10-24T09:31:14Z

This product is named 'TP-LINK USB 3.0 Gigabit Ethernet Network Adapter (Model No.is UE300)'. It uses chip RTL8153 and works with driver drivers/net/usb/r8152.c Signed-off-by: Ran Wang Signed-off-by: David S. Miller

cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwan

2017-10-09T23:03:32Z

The u-blox TOBY-L2 is a LTE Cat 4 module with HSPA+ and 2G fallback. This module allows switching to different USB profiles with the 'AT+UUSBCONF' command, and provides a ECM network interface when the 'AT+UUSBCONF=2' profile is selected. The u-blox SARA-U2 is a HSPA module with 2G fallback. The default USB configuration includes a ECM network interface. Both these modules are controlled via AT commands through one of the TTYs exposed. Connecting these modules may be done just by activating the desired PDP context with 'AT+CGACT=1,' and then running DHCP on the ECM interface. Signed-off-by: Aleksander Morgado Signed-off-by: David S. Miller