kernel/drivers/net/phy, branch linux-6.1.y

net: sfp: Fix quirk for Ubiquiti U-Fiber Instant SFP module

2026-02-19T15:25:15Z

commit adcbadfd8e05d3558c9cfaa783f17c645181165f upstream. Commit fd580c9830316eda ("net: sfp: augment SFP parsing with phy_interface_t bitmap") did not add augumentation for the interface bitmap in the quirk for Ubiquiti U-Fiber Instant. The subsequent commit f81fa96d8a6c7a77 ("net: phylink: use phy_interface_t bitmaps for optical modules") then changed phylink code for selection of SFP interface: instead of using link mode bitmap, the interface bitmap is used, and the fastest interface mode supported by both SFP module and MAC is chosen. Since the interface bitmap contains also modes faster than 1000base-x, this caused a regression wherein this module stopped working out-of-the-box. Fix this. Fixes: fd580c9830316eda ("net: sfp: augment SFP parsing with phy_interface_t bitmap") Signed-off-by: Marek Behún Reviewed-by: Maxime Chevallier Reviewed-by: Russell King (Oracle) Link: https://patch.msgid.link/20260129082227.17443-1-kabel@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: phy: adin1100: Fix software power-down ready condition

2026-01-11T14:18:27Z

[ Upstream commit bccaf1fe08f2c9f96f6bc38391d41e67f6bf38e3 ] Value CRSM_SFT_PD written to Software Power-Down Control Register (CRSM_SFT_PD_CNTRL) is 0x01 and therefor different to value CRSM_SFT_PD_RDY (0x02) read from System Status Register (CRSM_STAT) for confirmation powerdown has been reached. The condition could have only worked when disabling powerdown (both 0x00), but never when enabling it (0x01 != 0x02). Result is a timeout, like so: $ ifdown eth0 macb f802c000.ethernet eth0: Link is Down ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110 ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110 Fixes: 7eaf9132996a ("net: phy: adin1100: Add initial support for ADIN1100 industrial PHY") Signed-off-by: Alexander Dahl Reviewed-by: Russell King (Oracle) Acked-by: Nuno Sá Link: https://patch.msgid.link/20251119124737.280939-2-ada@thorsis.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

phy: mscc: Fix PTP for VSC8574 and VSC8572

2026-01-11T14:18:20Z

[ Upstream commit ea5df88aeca112aac69e6c32e3dd1433a113b0c9 ] The PTP initialization is two-step. First part are the function vsc8584_ptp_probe_once() and vsc8584_ptp_probe() at probe time which initialize the locks, queues, creates the PTP device. The second part is the function vsc8584_ptp_init() at config_init() time which initialize PTP in the HW. For VSC8574 and VSC8572, the PTP initialization is incomplete. It is missing the first part but it makes the second part. Meaning that the ptp_clock_register() is never called. There is no crash without the first part when enabling PTP but this is unexpected because some PHys have PTP functionality exposed by the driver and some don't even though they share the same PTP clock PTP. Fixes: 774626fa440e ("net: phy: mscc: Add PTP support for 2 more VSC PHYs") Reviewed-by: Maxime Chevallier Signed-off-by: Horatiu Vultur Link: https://patch.msgid.link/20251023191350.190940-3-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: mdio: fix resource leak in mdiobus_register_device()

2025-12-06T21:12:32Z

[ Upstream commit e6ca8f533ed41129fcf052297718f417f021cc7d ] Fix a possible leak in mdiobus_register_device() when both a reset-gpio and a reset-controller are present. Clean up the already claimed reset-gpio, when the registration of the reset-controller fails, so when an error code is returned, the device retains its state before the registration attempt. Link: https://lore.kernel.org/all/20251106144603.39053c81@kernel.org/ Fixes: 71dd6c0dff51 ("net: phy: add support for reset-controller") Signed-off-by: Buday Csaba Link: https://patch.msgid.link/4b419377f8dd7d2f63f919d0f74a336c734f8fff.1762584481.git.buday.csaba@prolan.hu Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: phy: marvell: Fix 88e1510 downshift counter errata

2025-12-06T21:12:22Z

[ Upstream commit deb105f49879dd50d595f7f55207d6e74dec34e6 ] The 88e1510 PHY has an erratum where the phy downshift counter is not cleared after phy being suspended(BMCR_PDOWN set) and then later resumed(BMCR_PDOWN cleared). This can cause the gigabit link to intermittently downshift to a lower speed. Disabling and re-enabling the downshift feature clears the counter, allowing the PHY to retry gigabit link negotiation up to the programmed retry count times before downshifting. This behavior has been observed on copper links. Signed-off-by: Rohan G Thomas Reviewed-by: Matthew Gerlach Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20250906-marvell_fix-v2-1-f6efb286937f@altera.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: phy: fixed_phy: let fixed_phy_unregister free the phy_device

2025-12-06T21:12:20Z

[ Upstream commit a0f849c1cc6df0db9083b4c81c05a5456b1ed0fb ] fixed_phy_register() creates and registers the phy_device. To be symmetric, we should not only unregister, but also free the phy_device in fixed_phy_unregister(). This allows to simplify code in users. Note wrt of_phy_deregister_fixed_link(): put_device(&phydev->mdio.dev) and phy_device_free(phydev) are identical. Signed-off-by: Heiner Kallweit Reviewed-by: Russell King (Oracle) Link: https://patch.msgid.link/ad8dda9a-10ed-4060-916b-3f13bdbb899d@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: phy: dp83867: Disable EEE support as not implemented

2025-12-06T21:12:13Z

[ Upstream commit 84a905290cb4c3d9a71a9e3b2f2e02e031e7512f ] While the DP83867 PHYs report EEE capability through their feature registers, the actual hardware does not support EEE (see Links). When the connected MAC enables EEE, it causes link instability and communication failures. The issue is reproducible with a iMX8MP and relevant stmmac ethernet port. Since the introduction of phylink-managed EEE support in the stmmac driver, EEE is now enabled by default, leading to issues on systems using the DP83867 PHY. Call phy_disable_eee during phy initialization to prevent EEE from being enabled on DP83867 PHYs. Link: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1445244/dp83867ir-dp83867-disable-eee-lpi Link: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/658638/dp83867ir-eee-energy-efficient-ethernet Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Cc: stable@vger.kernel.org Signed-off-by: Emanuele Ghidoli Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20251023144857.529566-1-ghidoliemanuele@gmail.com Signed-off-by: Jakub Kicinski [ replaced phy_disable_eee() call with direct eee_broken_modes assignment ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

phy: mscc: Stop taking ts_lock for tx_queue and use its own lock

2025-09-09T16:54:16Z

[ Upstream commit 9b2bfdbf43adb9929c5ddcdd96efedbf1c88cf53 ] When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e #427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e #427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000e 0000000e 0004b47a 0000003a 00000000 5fc0: 00000001 0000000e 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

phy: mscc: Fix when PTP clock is register and unregister

2025-09-04T13:26:27Z

[ Upstream commit 882e57cbc7204662f6c5672d5b04336c1d790b03 ] It looks like that every time when the interface was set down and up the driver was creating a new ptp clock. On top of this the function ptp_clock_unregister was never called. Therefore fix this by calling ptp_clock_register and initialize the mii_ts struct inside the probe function and call ptp_clock_unregister when driver is removed. Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur Reviewed-by: Vadim Fedorenko Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20250825065543.2916334-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

phy: mscc: Fix timestamping for vsc8584

2025-08-28T14:26:18Z

[ Upstream commit bc1a59cff9f797bfbf8f3104507584d89e9ecf2e ] There was a problem when we received frames and the frames were timestamped. The driver is configured to store the nanosecond part of the timestmap in the ptp reserved bits and it would take the second part by reading the LTC. The problem is that when reading the LTC we are in atomic context and to read the second part will go over mdio bus which might sleep, so we get an error. The fix consists in actually put all the frames in a queue and start the aux work and in that work to read the LTC and then calculate the full received time. Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur Reviewed-by: Vadim Fedorenko Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20250818081029.1300780-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin