kernel/drivers/net/phy/Makefile, branch linux-6.9.y

net: phy: move at803x PHY driver to dedicated directory

2024-02-01T00:25:16Z

In preparation for addition of other Qcom PHY and to tidy things up, move the at803x PHY driver to dedicated directory. The same order in the Kconfig selection is saved. Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240129141600.2592-2-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski

Revert "Introduce PHY listing and link_topology tracking"

2024-01-05T00:05:47Z

This reverts commit 32bb4515e34469975abc936deb0a116c4a445817. This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a. This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1. This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8. This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf. This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6. This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b. This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5. This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113. This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e. This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a. This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34. This reverts commit 02018c544ef113e980a2349eba89003d6f399d22. Looks like we need more time for reviews, and incremental changes will be hard to make sense of. So revert. Link: https://lore.kernel.org/all/ZZP6FV5sXEf+xd58@shell.armlinux.org.uk/ Signed-off-by: Jakub Kicinski

net: phy: Introduce ethernet link topology representation

2024-01-01T18:38:56Z

Link topologies containing multiple network PHYs attached to the same net_device can be found when using a PHY as a media converter for use with an SFP connector, on which an SFP transceiver containing a PHY can be used. With the current model, the transceiver's PHY can't be used for operations such as cable testing, timestamping, macsec offload, etc. The reason being that most of the logic for these configuration, coming from either ethtool netlink or ioctls tend to use netdev->phydev, which in multi-phy systems will reference the PHY closest to the MAC. Introduce a numbering scheme allowing to enumerate PHY devices that belong to any netdev, which can in turn allow userspace to take more precise decisions with regard to each PHY's configuration. The numbering is maintained per-netdev, in a phy_device_list. The numbering works similarly to a netdevice's ifindex, with identifiers that are only recycled once INT_MAX has been reached. This prevents races that could occur between PHY listing and SFP transceiver removal/insertion. The identifiers are assigned at phy_attach time, as the numbering depends on the netdevice the phy is attached to. Signed-off-by: Maxime Chevallier Signed-off-by: David S. Miller

net: phy: nxp-c45-tja11xx: add MACsec support

2023-12-27T13:08:10Z

Add MACsec support. The MACsec block has four TX SCs and four RX SCs. The driver supports up to four SecY. Each SecY with one TX SC and one RX SC. The RX SCs can have two keys, key A and key B, written in hardware and enabled at the same time. The TX SCs can have two keys written in hardware, but only one can be active at a given time. On TX, the SC is selected using the MAC source address. Due of this selection mechanism, each offloaded netdev must have a unique MAC address. On RX, the SC is selected by SCI(found in SecTAG or calculated using MAC SA), or using RX SC 0 as implicit. Signed-off-by: Radu Pirea (NXP OSS) Signed-off-by: David S. Miller

net: phy: add Rust Asix PHY driver

2023-12-15T09:35:50Z

This is the Rust implementation of drivers/net/phy/ax88796b.c. The features are equivalent. You can choose C or Rust version kernel configuration. Signed-off-by: FUJITA Tomonori Reviewed-by: Trevor Gross Reviewed-by: Benno Lossin Reviewed-by: Andrew Lunn Reviewed-by: Alice Ryhl Signed-off-by: David S. Miller

net: phy: Add support for the DP83TG720S Ethernet PHY

2023-12-14T02:01:08Z

The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver. This driver was tested with i.MX8MP EQOS (stmmac) on the MAC side and same TI PHY on other side. Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20231212054144.87527-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

net: phy: aquantia: move to separate directory

2023-11-16T22:10:29Z

Move aquantia PHY driver to separate driectory in preparation for firmware loading support to keep things tidy. Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: provide phylib stubs for hardware timestamping operations

2023-08-03T02:11:06Z

net/core/dev_ioctl.c (built-in code) will want to call phy_mii_ioctl() for hardware timestamping purposes. This is not directly possible, because phy_mii_ioctl() is a symbol provided under CONFIG_PHYLIB. Do something similar to what was done in DSA in commit 5a17818682cf ("net: dsa: replace NETDEV_PRE_CHANGE_HWTSTAMP notifier with a stub"), and arrange some indirect calls to phy_mii_ioctl() through a stub structure containing function pointers, that's provided by phylib as built-in even when CONFIG_PHYLIB=m, and which phy_init() populates at runtime (module insertion). Note: maybe the ownership of the ethtool_phy_ops singleton is backwards, and the methods exposed by that should be later merged into phylib_stubs. Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20230801142824.1772134-12-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2110 PHY

2023-07-20T10:24:06Z

Add a driver for the Marvell 88Q2110. This driver allows to detect the link, switch between 100BASE-T1 and 1000BASE-T1 and switch between master and slave mode. Autonegotiation supported by the PHY does not yet work. Signed-off-by: Stefan Eichenberger Reviewed-by: Andrew Lunn Signed-off-by: Paolo Abeni

net: phy: add driver for MediaTek SoC built-in GE PHYs

2023-06-12T10:55:04Z

Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet PHYs which require calibration data from the SoC's efuse. Despite the similar design the driver doesn't share any code with the existing mediatek-ge.c. Add support for such PHYs by introducing a new driver with basic support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs. Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller