kernel/drivers/net/phy/Kconfig, branch linux-4.1.y

net: amd-xgbe: Add hardware dependency

2015-05-09T20:24:15Z

The amd-xgbe driver currently only works with the Seattle SoC, which is ARM64 architecture, so there is no point in building this driver on other architectures except for build testing purpose. The dependency list can be updated later if the driver ever supports other architectures. Signed-off-by: Jean Delvare Cc: Tom Lendacky Cc: Florian Fainelli Signed-off-by: David S. Miller

net: phy: broadcom: Add BCM54616S phy entry

2015-04-08T19:28:13Z

Signed-off-by: Alessio Igor Bogani Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

amd-xgbe: Add ACPI support

2015-01-17T03:24:20Z

Add support for ACPI to the amd-xgbe and amd-xgbe-phy drivers. This support converts many of the device tree APIs to the new device_property APIs. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

net: Allow FIXED_PHY to be modular.

2014-12-16T20:02:23Z

Otherwise we get things like: warning: (NET_DSA_BCM_SF2 && BCMGENET && SYSTEMPORT) selects FIXED_PHY which has unmet direct dependencies (NETDEVICES && PHYLIB=y) In order to make this work we have to rename fixed.c to fixed_phy.c because the regulator drivers already have a module named "fixed.o". Signed-off-by: David S. Miller

amd-xgbe-phy: Let AMD_XGBE_PHY depend on HAS_IOMEM

2014-11-06T02:50:13Z

The amd-xgbe-phy driver needs to perform ioremap calls, so add HAS_IOMEM to its build dependency. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

drivers/net/phy/Kconfig: Let MDIO_BCM_UNIMAC depend on HAS_IOMEM

2014-10-06T04:46:27Z

MDIO_BCM_UNIMAC needs HAS_IOMEM, so depend on it, the related error ( with allmodconfig under um): MODPOST 1205 modules ERROR: "devm_ioremap" [drivers/net/phy/mdio-bcm-unimac.ko] undefined! Signed-off-by: Chen Gang Signed-off-by: David S. Miller

net: phy: mdio-sun4i: don't select REGULATOR

2014-09-07T23:12:03Z

The mdio-sun4i driver automatically selects REGULATOR and REGULATOR_FIXED_VOLTAGE because it uses the regulator API. But a driver selecting a subsystem increases the chance of generating circular Kconfig dependencies, especially when other drivers depend on the selected symbol. Since the regulator API functions are replaced with no-ops when REGULATOR is disabled, the driver can be built successfully even without regulator support and so those 'select' dependencies can be safely dropped. Suggested-by: Arnd Bergmann Signed-off-by: Beniamino Galvani Signed-off-by: David S. Miller

net: phy: add generic UniMAC MDIO bus driver

2014-08-28T05:59:39Z

Add a generic UniMAC MDIO bus driver and its Device Tree binding, which can be used by the BCMGENET driver as-is, and the upcoming Starfighter 2 Ethernet switch MDIO bus controller. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

amd-xgbe: Configuration and build support

2014-06-05T22:26:51Z

This patch provides the Kconfig and Makefile changes needed to configure and build the AMD 10GbE platform driver and the AMD 10GbE phylib driver. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

net: phy: add Broadcom BCM7xxx internal PHY driver

2014-02-14T05:27:58Z

This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs internal PHYs. This driver supports the following generation of SoCs: - BCM7366, BCM7439, BCM7445 (28nm process) - all 40nm and 65nm (older MIPS-based SoCs) The PHYs on these SoCs require a bunch of workarounds to operate correctly, both during configuration time and at suspend/resume time, the driver handles that for us. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller