kernel/drivers/net/ipvlan, branch linux-4.15.y

ipvlan: add L2 check for packets arriving via virtual devices

2018-03-19T08:09:59Z

[ Upstream commit 92ff42645028fa6f9b8aa767718457b9264316b4 ] Packets that don't have dest mac as the mac of the master device should not be entertained by the IPvlan rx-handler. This is mostly true as the packet path mostly takes care of that, except when the master device is a virtual device. As demonstrated in the following case - ip netns add ns1 ip link add ve1 type veth peer name ve2 ip link add link ve2 name iv1 type ipvlan mode l2 ip link set dev iv1 netns ns1 ip link set ve1 up ip link set ve2 up ip -n ns1 link set iv1 up ip addr add 192.168.10.1/24 dev ve1 ip -n ns1 addr 192.168.10.2/24 dev iv1 ping -c2 192.168.10.2 ip neigh show dev ve1 ip neigh show 192.168.10.2 lladdr dev ve1 ping -c2 192.168.10.2 This patch adds that missing check in the IPvlan rx-handler. Reported-by: Amit Sikka Signed-off-by: Mahesh Bandewar Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ipvlan: Add the skb->mark as flow4's member to lookup route

2017-12-03T14:44:02Z

Current codes don't use skb->mark to assign flowi4_mark, it would make the policy route rule with fwmark doesn't work as expected. Signed-off-by: Gao Feng Signed-off-by: David S. Miller

ipvlan: Fix insufficient skb linear check for ipv6 icmp

2017-11-23T18:37:02Z

In the function ipvlan_get_L3_hdr, current codes use pskb_may_pull to make sure the skb header has enough linear room for ipv6 header. But it would use the latter memory directly without linear check when it is icmp. So it still may access the unepxected memory in ipvlan_addr_lookup. Now invoke the pskb_may_pull again if it is ipv6 icmp. Signed-off-by: Gao Feng Signed-off-by: David S. Miller

ipvlan: Fix insufficient skb linear check for arp

2017-11-23T18:37:02Z

In the function ipvlan_get_L3_hdr, current codes use pskb_may_pull to make sure the skb header has enough linear room for arp header. But it would access the arp payload in func ipvlan_addr_lookup. So it still may access the unepxected memory. Now use arp_hdr_len(port->dev) instead of the arp header as the param. Signed-off-by: Gao Feng Signed-off-by: David S. Miller

ipvlan: NULL pointer dereference panic in ipvlan_port_destroy

2017-11-18T01:37:00Z

When call to register_netdevice() (called from ipvlan_link_new()) fails, we call ipvlan_uninit() (through ndo_uninit()) to destroy the ipvlan port. After returning unsuccessfully from register_netdevice() we go ahead and call ipvlan_port_destroy() again which causes NULL pointer dereference panic. Fix the issue by making ipvlan_init() and ipvlan_uninit() call symmetric. The ipvlan port will now be created inside ipvlan_init() and will be destroyed in ipvlan_uninit(). Fixes: 2ad7bf363841 (ipvlan: Initial check-in of the IPVLAN driver) Signed-off-by: Girish Moodalbail Signed-off-by: David S. Miller

ipvlan: fix ipv6 outbound device

2017-11-11T10:27:05Z

When process the outbound packet of ipv6, we should assign the master device to output device other than input device. Signed-off-by: Keefe Liu Acked-by: Mahesh Bandewar Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-10-30T12:09:24Z

Several conflicts here. NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to nfp_fl_output() needed some adjustments because the code block is in an else block now. Parallel additions to net/pkt_cls.h and net/sch_generic.h A bug fix in __tcp_retransmit_skb() conflicted with some of the rbtree changes in net-next. The tc action RCU callback fixes in 'net' had some overlap with some of the recent tcf_block reworking. Signed-off-by: David S. Miller

ipvlan: implement VEPA mode

2017-10-29T09:39:57Z

This is very similar to the Macvlan VEPA mode, however, there is some difference. IPvlan uses the mac-address of the lower device, so the VEPA mode has implications of ICMP-redirects for packets destined for its immediate neighbors sharing same master since the packets will have same source and dest mac. The external switch/router will send redirect msg. Having said that, this will be useful tool in terms of debugging since IPvlan will not switch packets within its slaves and rely completely on the external entity as intended in 802.1Qbg. Signed-off-by: Mahesh Bandewar Signed-off-by: David S. Miller

ipvlan: introduce 'private' attribute for all existing modes.

2017-10-29T09:39:57Z

IPvlan has always operated in bridge mode. However there are scenarios where each slave should be able to talk through the master device but not necessarily across each other. Think of an environment where each of a namespace is a private and independant customer. In this scenario the machine which is hosting these namespaces neither want to tell who their neighbor is nor the individual namespaces care to talk to neighbor on short-circuited network path. This patch implements the mode that is very similar to the 'private' mode in macvlan where individual slaves can send and receive traffic through the master device, just that they can not talk among slave devices. Signed-off-by: Mahesh Bandewar Signed-off-by: David S. Miller

tap: reference to KVA of an unloaded module causes kernel panic

2017-10-28T10:17:21Z

The commit 9a393b5d5988 ("tap: tap as an independent module") created a separate tap module that implements tap functionality and exports interfaces that will be used by macvtap and ipvtap modules to create create respective tap devices. However, that patch introduced a regression wherein the modules macvtap and ipvtap can be removed (through modprobe -r) while there are applications using the respective /dev/tapX devices. These applications cause kernel to hold reference to /dev/tapX through 'struct cdev macvtap_cdev' and 'struct cdev ipvtap_dev' defined in macvtap and ipvtap modules respectively. So, when the application is later closed the kernel panics because we are referencing KVA that is present in the unloaded modules. ----------8<------- Example ----------8<---------- $ sudo ip li add name mv0 link enp7s0 type macvtap $ sudo ip li show mv0 |grep mv0| awk -e '{print $1 $2}' 14:mv0@enp7s0: $ cat /dev/tap14 & $ lsmod |egrep -i 'tap|vlan' macvtap 16384 0 macvlan 24576 1 macvtap tap 24576 3 macvtap $ sudo modprobe -r macvtap $ fg cat /dev/tap14 ^C <...system panics...> BUG: unable to handle kernel paging request at ffffffffa038c500 IP: cdev_put+0xf/0x30 ----------8<-----------------8<---------- The fix is to set cdev.owner to the module that creates the tap device (either macvtap or ipvtap). With this set, the operations (in fs/char_dev.c) on char device holds and releases the module through cdev_get() and cdev_put() and will not allow the module to unload prematurely. Fixes: 9a393b5d5988ea4e (tap: tap as an independent module) Signed-off-by: Girish Moodalbail Signed-off-by: David S. Miller