kernel/drivers/net/hyperv/netvsc.c, branch linux-5.1.y

hv_netvsc: fix race that may miss tx queue wakeup

2019-05-31T13:43:15Z

[ Upstream commit 93aa4792c3908eac87ddd368ee0fe0564148232b ] When the ring buffer is almost full due to RX completion messages, a TX packet may reach the "low watermark" and cause the queue stopped. If the TX completion arrives earlier than queue stopping, the wakeup may be missed. This patch moves the check for the last pending packet to cover both EAGAIN and success cases, so the queue will be reliably waked up when necessary. Reported-and-tested-by: Stephan Klein Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

hv_netvsc: Fix unwanted wakeup after tx_disable

2019-03-29T20:34:01Z

After queue stopped, the wakeup mechanism may wake it up again when ring buffer usage is lower than a threshold. This may cause send path panic on NULL pointer when we stopped all tx queues in netvsc_detach and start removing the netvsc device. This patch fix it by adding a tx_disable flag to prevent unwanted queue wakeup. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Reported-by: Mohammed Gamal Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: fix typos in code comments

2019-01-23T18:21:34Z

Fix all typos from hyperv netvsc code comments. Signed-off-by: Adrian Vladu Cc: "K. Y. Srinivasan" Cc: Haiyang Zhang Cc: Stephen Hemminger Cc: Sasha Levin Cc: "David S. Miller" Cc: "Alessandro Pilotti" Signed-off-by: Sasha Levin

hv_netvsc: Fix hash key value reset after other ops

2019-01-23T18:21:28Z

Changing mtu, channels, or buffer sizes ops call to netvsc_attach(), rndis_set_subchannel(), which always reset the hash key to default value. That will override hash key changed previously. This patch fixes the problem by save the hash key, then restore it when we re- add the netvsc device. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang Reviewed-by: Michael Kelley [sl: fix up subject line] Signed-off-by: Sasha Levin

hv_netvsc: Add support for LRO/RSC in the vSwitch

2018-09-23T00:23:15Z

LRO/RSC in the vSwitch is a feature available in Windows Server 2019 hosts and later. It reduces the per packet processing overhead by coalescing multiple TCP segments when possible. This patch adds netvsc driver support for this feature. Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: pair VF based on serial number

2018-09-17T14:59:41Z

Matching network device based on MAC address is problematic since a non VF network device can be creted with a duplicate MAC address causing confusion and problems. The VMBus API does provide a serial number that is a better matching method. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

hv_netvsc: Fix napi reschedule while receive completion is busy

2018-07-18T22:23:30Z

If out ring is full temporarily and receive completion cannot go out, we may still need to reschedule napi if certain conditions are met. Otherwise the napi poll might be stopped forever, and cause network disconnect. Fixes: 7426b1a51803 ("netvsc: optimize receive completions") Signed-off-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: split sub-channel setup into async and sync

2018-06-30T12:28:36Z

When doing device hotplug the sub channel must be async to avoid deadlock issues because device is discovered in softirq context. When doing changes to MTU and number of channels, the setup must be synchronous to avoid races such as when MTU and device settings are done in a single ip command. Reported-by: Thomas Walker Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Fixes: 732e49850c5e ("netvsc: fix race on sub channel creation") Signed-off-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-06-10T20:01:12Z

Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...

hv_netvsc: simplify receive side calling arguments

2018-04-27T18:46:26Z

The calls up from the napi poll reading the receive ring had many places where an argument was being recreated. I.e the caller already had the value and wasn't passing it, then the callee would use known relationship to determine the same value. Simpler and faster to just pass arguments needed. Also, add const in a couple places where message is being only read. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller