kernel/drivers/net/ethernet, branch linux-rolling-stable

net: macb: Shuffle the tx ring before enabling tx

2026-03-19T15:15:23Z

commit 881a0263d502e1a93ebc13a78254e9ad19520232 upstream. Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The transmission may become stuck on a packet that has already been sent out, with its 'TX_USED' bit set, but has not yet been processed. However, due to the manipulation of 'queue->tx_head' and 'queue->tx_tail', `macb_tx_poll()` incorrectly assumes there are no packets to handle because `queue->tx_head == queue->tx_tail`. This issue is only resolved when a new packet is placed at this position. This is the root cause of the prolonged recovery time observed for the NFS root filesystem. To resolve this issue, shuffle the tx ring and tx skb array so that the first unsent packet is positioned at the start of the tx ring. Additionally, ensure that updates to `queue->tx_head` and `queue->tx_tail` are properly protected with the appropriate lock. [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm Fixes: bf9cf80cab81 ("net: macb: Fix tx/rx malfunction after phy link down and up") Reported-by: Quanyang Wang Signed-off-by: Kevin Hao Cc: stable@vger.kernel.org Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260307-zynqmp-v2-1-6ef98a70e1d0@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ethernet: arc: emac: quiesce interrupts before requesting IRQ

2026-03-19T15:15:22Z

commit 2503d08f8a2de618e5c3a8183b250ff4a2e2d52c upstream. Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe should not see interrupt delivery in the usual case. However, hardware may still present stale or latched interrupt status left by firmware or the bootloader. If probe later unwinds after devm_request_irq() has installed the handler, such a stale interrupt can still reach arc_emac_intr() during teardown and race with release of the associated net_device. Avoid that window by putting the device into a known quiescent state before requesting the IRQ: disable all EMAC interrupt sources and clear any pending EMAC interrupt status bits. This keeps the change hardware-focused and minimal, while preventing spurious IRQ delivery from leftover state. Fixes: e4f2379db6c6 ("ethernet/arc/arc_emac - Add new driver") Cc: stable@vger.kernel.org Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260309132409.584966-1-fanwu01@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

ice: fix retry for AQ command 0x06EE

2026-03-19T15:15:18Z

commit fb4903b3354aed4a2301180cf991226f896c87ed upstream. Executing ethtool -m can fail reporting a netlink I/O error while firmware link management holds the i2c bus used to communicate with the module. According to Intel(R) Ethernet Controller E810 Datasheet Rev 2.8 [1] Section 3.3.10.4 Read/Write SFF EEPROM (0x06EE) request should to be retried upon receiving EBUSY from firmware. Commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") implemented it only for part of ice_get_module_eeprom(), leaving all other calls to ice_aq_sff_eeprom() vulnerable to returning early on getting EBUSY without retrying. Remove the retry loop from ice_get_module_eeprom() and add Admin Queue (AQ) command with opcode 0x06EE to the list of commands that should be retried on receiving EBUSY from firmware. Cc: stable@vger.kernel.org Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") Signed-off-by: Jakub Staniszewski Co-developed-by: Dawid Osuchowski Signed-off-by: Dawid Osuchowski Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Link: https://www.intel.com/content/www/us/en/content-details/613875/intel-ethernet-controller-e810-datasheet.html [1] Reviewed-by: Paul Menzel Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

net: mana: Ring doorbell at 4 CQ wraparounds

2026-03-19T15:15:18Z

commit dabffd08545ffa1d7183bc45e387860984025291 upstream. MANA hardware requires at least one doorbell ring every 8 wraparounds of the CQ. The driver rings the doorbell as a form of flow control to inform hardware that CQEs have been consumed. The NAPI poll functions mana_poll_tx_cq() and mana_poll_rx_cq() can poll up to CQE_POLLING_BUFFER (512) completions per call. If the CQ has fewer than 512 entries, a single poll call can process more than 4 wraparounds without ringing the doorbell. The doorbell threshold check also uses ">" instead of ">=", delaying the ring by one extra CQE beyond 4 wraparounds. Combined, these issues can cause the driver to exceed the 8-wraparound hardware limit, leading to missed completions and stalled queues. Fix this by capping the number of CQEs polled per call to 4 wraparounds of the CQ in both TX and RX paths. Also change the doorbell threshold from ">" to ">=" so the doorbell is rung as soon as 4 wraparounds are reached. Cc: stable@vger.kernel.org Fixes: 58a63729c957 ("net: mana: Fix doorbell out of order violation and avoid unnecessary doorbell rings") Signed-off-by: Long Li Reviewed-by: Haiyang Zhang Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20260226192833.1050807-1-longli@microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

ixgbevf: fix link setup issue

2026-03-19T15:15:16Z

commit feae40a6a178bb525a15f19288016e5778102a99 upstream. It may happen that VF spawned for E610 adapter has problem with setting link up. This happens when ixgbevf supporting mailbox API 1.6 cooperates with PF driver which doesn't support this version of API, and hence doesn't support new approach for getting PF link data. In that case VF asks PF to provide link data but as PF doesn't support it, returns -EOPNOTSUPP what leads to early bail from link configuration sequence. Avoid such situation by using legacy VFLINKS approach whenever negotiated API version is less than 1.6. To reproduce the issue just create VF and set its link up - adapter must be any from the E610 family, ixgbevf must support API 1.6 or higher while ixgbevf must not. Fixes: 53f0eb62b4d2 ("ixgbevf: fix getting link speed data for E610 devices") Reviewed-by: Aleksandr Loktionov Reviewed-by: Piotr Kwapulinski Reviewed-by: Paul Menzel Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

ice: reintroduce retry mechanism for indirect AQ

2026-03-19T15:15:16Z

commit 326256c0a72d4877cec1d4df85357da106233128 upstream. Add retry mechanism for indirect Admin Queue (AQ) commands. To do so we need to keep the command buffer. This technically reverts commit 43a630e37e25 ("ice: remove unused buffer copy code in ice_sq_send_cmd_retry()"), but combines it with a fix in the logic by using a kmemdup() call, making it more robust and less likely to break in the future due to programmer error. Cc: Michal Schmidt Cc: stable@vger.kernel.org Fixes: 3056df93f7a8 ("ice: Re-send some AQ commands, as result of EBUSY AQ error") Signed-off-by: Jakub Staniszewski Co-developed-by: Dawid Osuchowski Signed-off-by: Dawid Osuchowski Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Reviewed-by: Paul Menzel Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

octeontx2-af: devlink: fix NIX RAS reporter to use RAS interrupt status

2026-03-19T15:14:58Z

[ Upstream commit 87f7dff3ec75b91def0024ebaaf732457f47a63b ] The NIX RAS health report path uses nix_af_rvu_err when handling the NIX_AF_RVU_RAS case, so the report prints the ERR interrupt status rather than the RAS interrupt status. Use nix_af_rvu_ras for the NIX_AF_RVU_RAS report. Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX") Signed-off-by: Alok Tiwari Link: https://patch.msgid.link/20260310184824.1183651-2-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

octeontx2-af: devlink: fix NIX RAS reporter recovery condition

2026-03-19T15:14:58Z

[ Upstream commit dc26ca99b835e21e76a58b1463b84adb0ca34f58 ] The NIX RAS health reporter recovery routine checks nix_af_rvu_int to decide whether to re-enable NIX_AF_RAS interrupts. This is the RVU interrupt status field and is unrelated to RAS events, so the recovery flow may incorrectly skip re-enabling NIX_AF_RAS interrupts. Check nix_af_rvu_ras instead before writing NIX_AF_RAS_ENA_W1S. Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX") Signed-off-by: Alok Tiwari Link: https://patch.msgid.link/20260310184824.1183651-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support

2026-03-19T15:14:58Z

[ Upstream commit 840c9d13cb1ca96683a5307ee8e221be163a2c1e ] The "rx_filter" member of "hwtstamp_config" structure is an enum field and does not support bitwise OR combination of multiple filter values. It causes error while linuxptp application tries to match rx filter version. Fix this by storing the requested filter type in a new port field. Fixes: 97248adb5a3b ("net: ti: am65-cpsw: Update hw timestamping filter for PTPv1 RX packets") Signed-off-by: Chintan Vankar Link: https://patch.msgid.link/20260310160940.109822-1-c-vankar@ti.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/mana: Null service_wq on setup error to prevent double destroy

2026-03-19T15:14:58Z

[ Upstream commit 87c2302813abc55c46485711a678e3c312b00666 ] In mana_gd_setup() error path, set gc->service_wq to NULL after destroy_workqueue() to match the cleanup in mana_gd_cleanup(). This prevents a use-after-free if the workqueue pointer is checked after a failed setup. Fixes: f975a0955276 ("net: mana: Fix double destroy_workqueue on service rescan PCI path") Signed-off-by: Shiraz Saleem Signed-off-by: Konstantin Taranov Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260309172443.688392-1-kotaranov@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin