kernel/drivers/net/ethernet, branch linux-5.1.y

net/mlx5e: Fix error flow in tx reporter diagnose

2019-07-28T06:28:35Z

[ Upstream commit 99d31cbd8953c6929da978bf049ab0f0b4e503d9 ] Fix tx reporter's diagnose callback. Propagate error when failing to gather diagnostics information or failing to print diagnostic data per queue. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Aya Levin Reviewed-by: Tariq Toukan Acked-by: Jiri Pirko Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Fix return value from timeout recover function

2019-07-28T06:28:35Z

[ Upstream commit 39825350ae2a52f8513741b36e42118bd80dd689 ] Fix timeout recover function to return a meaningful return value. When an interrupt was not sent by the FW, return IO error instead of 'true'. Fixes: c7981bea48fb ("net/mlx5e: Fix return status of TX reporter timeout recover") Signed-off-by: Aya Levin Acked-by: Jiri Pirko Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Rx, Fix checksum calculation for new hardware

2019-07-28T06:28:35Z

[ Upstream commit db849faa9bef993a1379dc510623f750a72fa7ce ] CQE checksum full mode in new HW, provides a full checksum of rx frame. Covering bytes starting from eth protocol up to last byte in the received frame (frame_size - ETH_HLEN), as expected by the stack. Fixing up skb->csum by the driver is not required in such case. This fix is to avoid wrong checksum calculation in drivers which already support the new hardware with the new checksum mode. Fixes: 85327a9c4150 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Fix port tunnel GRE entropy control

2019-07-28T06:28:35Z

[ Upstream commit 914adbb1bcf89478ac138318d28b302704564d59 ] GRE entropy calculation is a single bit per card, and not per port. Force disable GRE entropy calculation upon the first GRE encap rule, and release the force at the last GRE encap rule removal. This is done per port. Fixes: 97417f6182f8 ("net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation") Signed-off-by: Eli Britstein Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn

2019-07-28T06:28:33Z

[ Upstream commit ef1ce7d7b67b46661091c7ccc0396186b7a247ef ] Check return value from mlx5e_attach_netdev, add error path on failure. Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by: Aya Levin Reviewed-by: Feras Daoud Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

sky2: Disable MSI on ASUS P6T

2019-07-28T06:28:32Z

[ Upstream commit a261e3797506bd561700be643fe1a85bf81e9661 ] The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496 Reported-and-tested-by: Marcus Seyfarth Signed-off-by: Takashi Iwai Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

r8169: fix issue with confused RX unit after PHY power-down on RTL8411b

2019-07-28T06:28:31Z

[ Upstream commit fe4e8db0392a6c2e795eb89ef5fcd86522e66248 ] On RTL8411b the RX unit gets confused if the PHY is powered-down. This was reported in [0] and confirmed by Realtek. Realtek provided a sequence to fix the RX unit after PHY wakeup. The issue itself seems to have been there longer, the Fixes tag refers to where the fix applies properly. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1692075 Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Tested-by: Ionut Radu Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: stmmac: Re-work the queue selection for TSO packets

2019-07-28T06:28:30Z

[ Upstream commit 4993e5b37e8bcb55ac90f76eb6d2432647273747 ] Ben Hutchings says: "This is the wrong place to change the queue mapping. stmmac_xmit() is called with a specific TX queue locked, and accessing a different TX queue results in a data race for all of that queue's state. I think this commit should be reverted upstream and in all stable branches. Instead, the driver should implement the ndo_select_queue operation and override the queue mapping there." Fixes: c5acdbee22a1 ("net: stmmac: Send TSO packets always from Queue 0") Suggested-by: Ben Hutchings Signed-off-by: Jose Abreu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: use promisc for unsupported filters

2019-07-28T06:28:26Z

[ Upstream commit 35cbef9863640f06107144687bd13151bc2e8ce3 ] Currently we silently ignore filters if we cannot meet the filter requirements. This will lead to the MAC dropping packets that are expected to pass. A better solution would be to set the NIC to promisc mode when the required filters cannot be met. Also correct the number of MDF filters supported. It should be 17, not 16. Signed-off-by: Justin Chen Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnx2x: Prevent load reordering in tx completion processing

2019-07-28T06:28:23Z

[ Upstream commit ea811b795df24644a8eb760b493c43fba4450677 ] This patch fixes an issue seen on Power systems with bnx2x which results in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons load in bnx2x_tx_int. Adding a read memory barrier resolves the issue. Signed-off-by: Brian King Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman