kernel/drivers/net/ethernet/xscale, branch linux-6.9.y

net: xscale: Drop unused PHY number

2023-11-02T05:15:15Z

For some cargoculted reason on incomplete cleanup, we have a PHY number which refers to nothing and gives confusing messages about PHY 0 on all ports. Print the name of the actual PHY device instead. Reported-by: Howard Harte Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20231028-ixp4xx-eth-id-v1-1-57be486d7f0f@linaro.org Signed-off-by: Jakub Kicinski

netdev: replace napi_reschedule with napi_schedule

2023-10-12T00:28:06Z

Now that napi_schedule return a bool, we can drop napi_reschedule that does the same exact function. The function comes from a very old commit bfe13f54f502 ("ibm_emac: Convert to use napi_struct independent of struct net_device") and the purpose is actually deprecated in favour of different logic. Convert every user of napi_reschedule to napi_schedule. Signed-off-by: Christian Marangi Acked-by: Jeff Johnson # ath10k Acked-by: Nick Child # ibm Acked-by: Marc Kleine-Budde # for can/dev/rx-offload.c Reviewed-by: Eric Dumazet Acked-by: Tariq Toukan Link: https://lore.kernel.org/r/20231009133754.9834-3-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski

net: ixp4xx_eth: Support changing the MTU

2023-10-06T22:52:08Z

As we don't specify the MTU in the driver, the framework will fall back to 1500 bytes and this doesn't work very well when we try to attach a DSA switch: eth1: mtu greater than device maximum ixp4xx_eth c800a000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead After locating an out-of-tree patch in OpenWrt I found suitable code to set the MTU on the interface and ported it and updated it. Now the MTU gets set properly. Reviewed-by: Jacob Keller Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20231005-ixp4xx-eth-mtu-v4-1-08c66ed0bc69@linaro.org Signed-off-by: Jakub Kicinski

net: ixp4xx_eth: Specify min/max MTU

2023-10-03T09:31:40Z

As we don't specify the MTU in the driver, the framework will fall back to 1500 bytes and this doesn't work very well when we try to attach a DSA switch: eth1: mtu greater than device maximum ixp4xx_eth c800a000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead I checked the developer docs and the hardware can actually do really big frames, so update the driver accordingly. Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20230923-ixp4xx-eth-mtu-v1-1-9e88b908e1b2@linaro.org Signed-off-by: Paolo Abeni

net: ethernet: xscale: Convert to platform remove callback returning void

2023-09-20T08:06:41Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Krzysztof Hałasa Signed-off-by: David S. Miller

ptp_ixp46x: convert .adjfreq to .adjfine

2022-11-11T10:58:39Z

The ptp_ixp46x implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this to the newer .adjfine, using the recently added adjust_by_scaled_ppm helper function. Signed-off-by: Jacob Keller Cc: Paolo Abeni Cc: Richard Cochran Cc: Linus Walleij Reviewed-by: Linus Walleij Signed-off-by: David S. Miller

net: xscale: Fix return type for implementation of ndo_start_xmit

2022-09-03T04:18:56Z

Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. eth_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua Link: https://lore.kernel.org/r/20220902081612.60405-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski

net: ethernet: move from strlcpy with unused retval to strscpy

2022-08-31T21:11:26Z

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Reviewed-by: Petr Machata # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski

ixp4xx_eth: Set MAC address from device tree

2022-07-09T11:34:18Z

If there is a MAC address specified in the device tree, then use it. This is already perfectly legal to specify in accordance with the generic ethernet-controller.yaml schema. Signed-off-by: Linus Walleij Signed-off-by: David S. Miller

ixp4xx_eth: Fall back to random MAC address

2022-07-09T11:34:17Z

If the firmware does not provide a MAC address to the driver, fall back to generating a random MAC address. Signed-off-by: Linus Walleij Signed-off-by: David S. Miller