kernel/drivers/net/ethernet/stmicro/stmmac/common.h, branch linux-4.3.y

stmmac: Configure Flow Control to work correctly based on rxfifo size

2015-04-16T17:58:42Z

Configure flow control correctly, and based on the receive fifo size read as a property from the devicetree since the Synopsys stmmac fifo sizes are configurable based on a particular chip's implementation. This patch maintains the previous incorrect behavior unless the receive fifo size is found in the devicetree. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller

stmmac: document common header file

2014-11-19T20:04:57Z

This patch adds some useful comments inside the common header file to provide information about the APIs exposed by the driver. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller

stmmac: fix sparse warnings

2014-11-06T19:35:11Z

This patch fixes the following sparse warnings. drivers/net/ethernet/stmicro/stmmac/enh_desc.c:381:30: warning: symbol 'enh_desc_ops' was not declared. Should it be static? drivers/net/ethernet/stmicro/stmmac/norm_desc.c:253:30: warning: symbol 'ndesc_ops' was not declared. Should it be static? drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:141:33: warning: symbol 'stmmac_ptp' was not declared. Should it be static? There is no functional change. Signed-off-by: Andy Shevchenko Acked-by: Giuseppe CAVALLARO Signed-off-by: David S. Miller

stmmac: fix the rx csum feature

2014-09-02T04:51:29Z

For new GMACs it is possible to turn-on/off the COE. In the current driver, when disabled the Rx-checksum via ethtool, the tool reported that csum was disabled but the HW continued to set the IPC. Indeed this is because the fix_features allows this. So the patch fixes this problem by adding the set_features. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller

stmmac: fix LPI TW timer value to 20.5us.

2014-09-01T05:01:06Z

The value for LPI TW timer has to be updated to 0x1E that is the hardcoded value of 20.5us and it will apply to all EEE enabled Remote PHYs. Disadvantage is for PHY's that support lesser wakeup time but we can accept it waiting to implement LLDP to negotiate the Wakeup time of Remote PHY. Signed-off-by: nandini sharma Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller

stmmac: fix the EEE LPI Macro definitions.

2014-09-01T05:01:06Z

This patch is to fix the definition of macros for EEE otherwise the LPI TX/RX entry/exit cannot be properly managed. Signed-off-by: Nandini Sharma Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller

stmmac: fix dma api misuse

2014-08-30T02:54:36Z

Enabling DMA_API_DEBUG, warnings are reported at runtime because the device driver frees DMA memory with wrong functions and it does not call dma_mapping_error after mapping dma memory. The first problem is fixed by of introducing a flag that helps us keeping track which mapping technique was used, so that we can use the right API for unmap. This approach was inspired by the e1000 driver, which uses a similar technique. Signed-off-by: Andre Draszik Signed-off-by: Giuseppe Cavallaro Reviewed-by: Denis Kirjanov Cc: Hans de Goede Signed-off-by: David S. Miller

net: stmmac: Support devicetree configs for mcast and ucast filter entries

2014-07-31T21:13:29Z

This patch adds and modifies code to support multiple Multicast and Unicast Synopsys MAC filter configurations. The default configuration is defined to support legacy driver behavior, which is 64 Multicast bins. The Unicast filter code previously assumed all controllers support 32 or 16 Unicast addresses based on controller version number, but this has been corrected to support a default of 1 Unicast address. The filter configuration may be specified through the devicetree using a Synopsys specific device tree entry. This information was verified with Synopsys through Synopsys Support Case #8000684337 and shared with the maintainer. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller

net: stmmac: Correct set_filter for multicast and unicast cases

2014-07-31T21:13:29Z

This patch removes the check for the number of mulitcast addresses when using hash based filtering since it's not necessary. If the number of multicast addresses in the list exceeds the number of multicast hash bins, the bins will "fold" over into one of the bins configured and enabled for the particular component instance. The default number of maximum unicast addresses was changed from 32 to 1 since this number is not dependent on the component revision. The maximum number of multicast and unicast addresses is dependent on the configuration of the Synopsys EMAC configured by the SOC architect at the time the features were selected and configured for a particular component. Sadly, Synopsys does not provide a way to query the precise number supported by a particular component, so we must fall back on a devicetree entry. This configuration could vary from vendor to vendor (such as STMicro, Altera, etc). The multicast bins are set for every possible filtering case (including no entries) - previously the bits were set only if multicast filter entries were present. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller

net: stmmac: Change MAC interface to support multiple filter configurations

2014-07-31T21:13:29Z

The synopsys EMAC can be configured for different numbers of multicast hash bins and perfect filter entries at device creation time and there's no way to query this configuration information at runtime. As a result, a devicetree parameter is required in order for the driver to program these filters correctly for a particular device instance. This patch modifies the 10/100/1000 MAC software interface such that these configuration parameters can be set at initialization time. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller