kernel/drivers/net/ethernet/sfc/tx_common.c, branch linux-6.2.y

sfc: support passing a representor to the EF100 TX path

2022-07-22T11:50:06Z

A non-null efv in __ef100_enqueue_skb() indicates that the packet is from that representor, should be transmitted with a suitable option descriptor (to instruct the switch to deliver it to the representee), and should not be accounted to the parent PF's stats or BQL. Signed-off-by: Edward Cree Signed-off-by: David S. Miller

net: allow gso_max_size to exceed 65536

2022-05-16T09:18:55Z

The code for gso_max_size was added originally to allow for debugging and workaround of buggy devices that couldn't support TSO with blocks 64K in size. The original reason for limiting it to 64K was because that was the existing limits of IPv4 and non-jumbogram IPv6 length fields. With the addition of Big TCP we can remove this limit and allow the value to potentially go up to UINT_MAX and instead be limited by the tso_max_size value. So in order to support this we need to go through and clean up the remaining users of the gso_max_size value so that the values will cap at 64K for non-TCPv6 flows. In addition we can clean up the GSO_MAX_SIZE value so that 64K becomes GSO_LEGACY_MAX_SIZE and UINT_MAX will now be the upper limit for GSO_MAX_SIZE. v6: (edumazet) fixed a compile error if CONFIG_IPV6=n, in a new sk_trim_gso_size() helper. netif_set_tso_max_size() caps the requested TSO size with GSO_MAX_SIZE. Signed-off-by: Alexander Duyck Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

net: sfc: fix using uninitialized xdp tx_queue

2022-04-06T12:50:17Z

In some cases, xdp tx_queue can get used before initialization. 1. interface up/down 2. ring buffer size change When CPU cores are lower than maximum number of channels of sfc driver, it creates new channels only for XDP. When an interface is up or ring buffer size is changed, all channels are initialized. But xdp channels are always initialized later. So, the below scenario is possible. Packets are received to rx queue of normal channels and it is acted XDP_TX and tx_queue of xdp channels get used. But these tx_queues are not initialized yet. If so, TX DMA or queue error occurs. In order to avoid this problem. 1. initializes xdp tx_queues earlier than other rx_queue in efx_start_channels(). 2. checks whether tx_queue is initialized or not in efx_xdp_tx_buffers(). Splat looks like: sfc 0000:08:00.1 enp8s0f1np1: TX queue 10 spurious TX completion id 250 sfc 0000:08:00.1 enp8s0f1np1: resetting (RECOVER_OR_ALL) sfc 0000:08:00.1 enp8s0f1np1: MC command 0x80 inlen 100 failed rc=-22 (raw=22) arg=789 sfc 0000:08:00.1 enp8s0f1np1: has been disabled Fixes: f28100cb9c96 ("sfc: fix lack of XDP TX queues - error XDP TX failed (-22)") Acked-by: Martin Habets Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

sfc: de-indirect TSO handling

2020-09-12T00:15:22Z

Remove the tx_queue->handle_tso function pointer, and just use tx_queue->tso_version to decide which function to call, thus removing an indirect call from the fast path. Instead of passing a tso_v2 flag to efx_mcdi_tx_init(), set the desired tx_queue->tso_version before calling it. In efx_mcdi_tx_init(), report back failure to obtain a TSOv2 context by setting tx_queue->tso_version to 0, which will cause the TX path to use the GSO-based fallback. Signed-off-by: Edward Cree Signed-off-by: David S. Miller

sfc: decouple TXQ type from label

2020-09-12T00:15:22Z

Make it possible to have an arbitrary mapping from types to labels, because when we add inner-csum-offload TXQs there will no longer be a convenient nesting hierarchy of NIC types (EF10 will have inner-csum TXQs, while Siena will have HIGHPRI). Correct a misleading comment on efx_hard_start_xmit(). Signed-off-by: Edward Cree Signed-off-by: David S. Miller

sfc: use efx_channel_tx_[old_]fill_level() in Siena/EF10 TX datapath

2020-09-05T19:21:40Z

Instead of open-coding the calculation with efx_tx_queue_partner(), use the functions that iterate over numbers of queues other than 2 with efx_for_each_channel_tx_queue(). Signed-off-by: Edward Cree Signed-off-by: Jakub Kicinski

sfc: add and use efx_tx_send_pending in tx.c

2020-09-05T19:21:39Z

Instead of using efx_tx_queue_partner(), which relies on the assumption that tx_queues_per_channel is 2, efx_tx_send_pending() iterates over txqs with efx_for_each_channel_tx_queue(). We unconditionally set tx_queue->xmit_pending (renamed from xmit_more_available), then condition on xmit_more for the call to efx_tx_send_pending(), which will clear xmit_pending. Thus, after an xmit_more TX, the doorbell is un-rung and xmit_pending is true. Signed-off-by: Edward Cree Signed-off-by: Jakub Kicinski

sfc_ef100: TX path for EF100 NICs

2020-08-04T01:22:54Z

Includes checksum offload and TSO, so declare those in our netdev features. Signed-off-by: Edward Cree Signed-off-by: David S. Miller

sfc: don't call tx_limit_len if NIC type doesn't have one

2020-07-02T21:47:40Z

EF100 doesn't need to split up large DMAs. Signed-off-by: Edward Cree Signed-off-by: David S. Miller

sfc: factor out efx_tx_tso_header_length() and understand encapsulation

2020-06-30T20:09:09Z

ef100 will need to check this against NIC limits. Signed-off-by: Edward Cree Signed-off-by: David S. Miller